★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Hot water repairs in Eastlakes 2018

We repair and replace hot water systems in Eastlakes homes: electric storage tanks in walk-up unit cupboards and tight laundries, gas continuous flow units on balconies and walls, gas and electric storage at brick houses, and heat pumps. We find the fault, tell you whether a repair or a replacement makes more sense, and give you a fixed price for each option before any work starts. Our workmanship carries a lifetime labour warranty, and we're a few minutes away in Matraville.

Many Eastlakes homes are 50 or 60 years old: red-brick walk-up units and houses built from the 1960s, many with small storage hot water tanks that are now reaching the end of their life. Unit laundries and small house laundries leave little room, so a new system has to be chosen to fit. Eastlakes is one of the closest suburbs to our Matraville workshop, so we can usually get there quickly and sort it out.

Hot water problems we fix

No hot water

Faulty elements, thermostats, igniters and gas valves diagnosed and repaired.

Lukewarm or running out

Failing elements, sediment, thermostat faults or an undersized system sorted.

Leaking systems

Leaking tanks, valves and fittings repaired, or the system replaced.

Continuous flow faults

Error codes, ignition and flow faults on gas units fixed.

Replacement

Old systems replaced with one that fits the space and your household.

Tempering valves

Valves fitted or replaced so bathroom water is a safe temperature.

Signs your hot water needs attention

  • No hot water, or only lukewarm.
  • Hot water running out sooner than it used to.
  • Water around the base of the tank or dripping from the unit.
  • Rusty or discoloured hot water.
  • Rumbling or popping from a storage tank.
  • An error code on a continuous flow controller.
  • The relief valve dripping constantly.

Hot water in Eastlakes homes

Electric tanks in unit cupboards

Many Eastlakes units without gas have an electric storage tank in a cupboard, often in the laundry or hallway. When one fails, the replacement has to fit the same space, be carried up the stairs, and connect to the existing water, power and relief valve drain. We measure first so the new tank fits.

Continuous flow on balconies and walls

Units with gas often have a continuous flow unit mounted on a balcony or an outside wall. These are compact and give endless hot water, but they're exposed to the weather and need the right gas supply and flue clearances.

Gas and electric storage at brick houses

Eastlakes' red-brick houses, built from the 1960s, usually have a gas or electric storage tank in the back laundry or down the side of the house. Most storage tanks last around ten years; plenty in Eastlakes are well past that.

Heat pumps

Heat pumps heat water using the air, which makes them efficient to run. They need outdoor space for the unit and some airflow, so they suit brick houses better than most units.

Eastlakes homes and their hot water

Home typeTypical systemWhat to think about
Walk-up units without gasElectric storage in a cupboard or unit laundryTank size, access up stairs, off-peak connection
Walk-up units with gasContinuous flow on a balcony or wallGas supply, flue clearances, building rules
Brick housesGas or electric storage in the laundry or down the sideAge, space for a heat pump or continuous flow
Newer apartments near Evans AvenueContinuous flow or central systemsWhich parts are yours and which are the building's

Repair or replace?

SituationRepairReplace
Electric tank, failed element or thermostatUsually worth it if the tank is soundIf the tank is old or leaking
Gas storage, pilot won't stay litOften a thermocouple or gas valveIf the tank is old
Tank leaking from the bodyNot repairableYes
Continuous flow error codeOften a sensor, igniter or fanIf the heat exchanger has failed
System over 10 years old with repeat faultsShort-term onlyUsually better value

How we handle a hot water job

  1. Tell us what's happening, and the brand and model if you can. A photo of the data plate helps.
  2. Diagnose it: we test the element, thermostat, gas valve, igniter or sensors.
  3. Give you options with a fixed price: repair, like-for-like replacement, or a different type of system.
  4. Do the work, including carrying the old system out and the new one in.
  5. Commission it: set the temperature, check the relief valve and tempering valve, and test every tap.
  6. Paperwork: compliance certificate and warranty details.

What affects the cost

  • The system type and size.
  • Access: stairs, tight cupboards and balconies.
  • Changes: moving to a different type of system or location.
  • Gas supply upgrades for continuous flow.
  • Extras: a tempering valve, new valves, or an off-peak connection.

You get a fixed price for each option before any work starts.

Who's responsible?

  • You: the hot water system serving only your home, and its pipes and valves.
  • Unit blocks: central hot water plants, shared flues and common property are usually the owners corporation's.
  • Jemena: the gas network and meter.
  • Your electricity provider: off-peak metering and supply.

Quick checks you can do

  1. Electric: check the hot water circuit at the switchboard hasn't tripped.
  2. Gas storage: check the pilot light through the viewing window.
  3. Continuous flow: note any error code, and check the gas is on.
  4. Look at the base of the tank or unit for water.
  5. Check the relief valve drain for constant dripping.

Signs it's urgent and when it can wait

  • Call straight away if the tank is leaking heavily, water is near electrics, or you can smell gas (turn it off at the meter and call Jemena first).
  • Call soon if you have no hot water.
  • Book a time if it's running lukewarm or the relief valve drips.

A recent hot water job nearby

Here's a recent hot water replacement nearby in Maroubra, where an old gas storage tank was replaced with continuous flow and the gas supply was upgraded to suit.

Old gas tank replaced with continuous flow, Maroubra (nearby)

The problem: the gas storage tank down the side of a Maroubra home had stopped sending hot water to the taps.

What we did: we explained repair against replacement and the systems that would suit, and the owners chose a Rinnai continuous flow unit. We removed the old tank, mounted the new unit on the wall, upsized the copper pipework, and replaced the gas regulator at the meter so the new system gets enough gas.

The result: reliable hot water at every tap, on a gas supply sized for the new unit.

Old gas hot water tank before replacement near Eastlakes
The old tank, Maroubra
New continuous flow hot water unit near Eastlakes
The new continuous flow unit

More local work is on our recent projects page.

“Great plumber, fixed my leaking taps quickly and at a great price!”

Tom (Google review)

Hot water across Eastlakes

  • The walk-up unit streets: 1960s and 70s blocks with electric tanks in cupboards and continuous flow on balconies.
  • The brick house streets: gas and electric storage tanks in back laundries and down the side.
  • Around the Evans Avenue shops: newer apartment buildings with continuous flow or central systems.
  • Near The Lakes Golf Club: homes on low, sandy ground.
  • Towards Rosebery and Daceyville: older homes with ageing storage systems.

Choosing a system for a Eastlakes unit

In a unit, the choice is usually decided by three things: whether there's gas, how much space there is, and how many people live there. Without gas, an electric storage tank is the usual answer, sized to the household and connected to off-peak power where possible. With gas, a continuous flow unit on a balcony or outside wall saves cupboard space and gives endless hot water, as long as the gas supply and flue position allow it. We'll look at what's there and give you options that actually fit.

Hot water system comparison

SystemProsCons
Electric storageSimple, no gas needed, suits cupboardsCan run out; running costs depend on tariff
Gas storageGood recovery, simpleNeeds space outside and a flue; loses some heat
Gas continuous flowEndless hot water, compactNeeds enough gas supply and flue clearance
Heat pumpEfficient to runNeeds outdoor space and airflow; higher up-front

Replacing a tank in a unit, step by step

  1. We measure the cupboard, the doorways and the stairs, and check the existing connections and relief valve drain.
  2. We confirm the right size and type of replacement and give you a fixed price.
  3. On the day, water and power are isolated and the old tank is drained.
  4. The old tank is disconnected and carried out, with floors and stairwells protected.
  5. The new tank is carried in, positioned, and connected with new valves where needed.
  6. We fill it, check for leaks, restore power, and test the temperature at each tap.
  7. The old tank is taken away.

Continuous flow units on balconies

A continuous flow unit on a Eastlakes balcony is exposed to wind, rain and sun. Its flue needs clearance from windows, doors and the balcony above, and its connections are outside. Common faults are failed igniters, fans and flow sensors, often showing as an error code. Corroded connections underneath can leak. Keep the area around the unit clear of stored items and plants so it can breathe and vent properly. When a unit is replaced, the new one must meet current clearance rules, which may mean a slightly different position.

Why hot water runs out in units

If your hot water runs out sooner than it used to, the usual causes in an electric tank are a failed element (many tanks have two), a faulty thermostat, or sediment in the bottom of the tank. Sometimes the household has simply grown and the tank is too small. We test each part and tell you whether it's a repair or a sizing problem. See hot water running out.

Brown or rusty hot water

If only the hot water runs brown, the tank's lining may be breaking down, or the sacrificial anode that protects it may be used up. In older brick houses, old galvanised pipe can also colour the water. We check the tank and the pipes. A tank that's rusting inside is near the end of its life. See brown hot water.

The relief valve

Every storage hot water system has a temperature and pressure relief valve near the top, with a drain pipe running down. It lets out a little water as the tank heats. If it drips constantly or pours, the mains pressure may be too high, the valve may be faulty, or the tank may be overheating. Don't block it. See relief valve dripping.

Tempering valves and safe water

Water stored in a hot water tank needs to be kept hot enough to prevent bacteria, which is hotter than is safe at a bathroom tap. A tempering valve mixes in cold water so bathroom taps deliver water at a safer temperature, protecting children and older people from scalds. Many older Eastlakes homes have no tempering valve, or one that has stopped working. We can check and fit one when we're there. See tempering valve installation.

Hot water in brick houses

Eastlakes' brick houses usually have more choice. A gas storage tank can be replaced like for like, upgraded to continuous flow if the gas supply allows, or swapped for a heat pump if there's room outside. Electric tanks can be replaced with a heat pump to cut running costs. We'll talk you through the options for your house and give you a fixed price for each.

Off-peak electric hot water

Electric tanks in many Eastlakes units are connected to an off-peak tariff, heating overnight when power is cheaper. If your hot water runs out late in the day, the tank may be too small for an off-peak-only connection, or the off-peak timer may need checking by your electricity provider. A slightly bigger tank, or a connection that allows a daytime boost, can help.

Gas supply for continuous flow

Continuous flow units need a lot of gas while they're running. If a unit was upgraded from storage without upgrading the gas pipe or regulator, it may struggle when the cooktop is also on, giving lukewarm water or error codes. We check the gas supply when replacing or diagnosing a unit. See gas hot water.

Leaks from the hot water system

A storage tank that leaks from the body has rusted through and can't be repaired. Turn off the water to it and switch off the power or gas, then call us. Leaks from valves and fittings can usually be repaired. In a unit, a leak from a tank in a cupboard can reach the unit below quickly, so act early.

Looking after your hot water

  • Lift the relief valve lever gently twice a year to check it moves freely (keep clear of the hot water).
  • Keep the area around a continuous flow unit clear.
  • Have a storage tank's anode checked every few years.
  • Note error codes and tell us the code if you call.
  • Don't block the relief valve drain.

Units in older blocks

In some older Eastlakes blocks, the hot water systems for several units sit together in a shared laundry or service area. Each unit's system is usually still the owner's, but access is shared. Let us know if that's your set-up, and we'll arrange access through the building.

Sizing a new system

Getting the size right matters. Too small and you run out; too big and you pay to heat water you don't use. For an electric storage tank, the size depends on the number of people and whether it's on off-peak or continuous power. For continuous flow, the size depends on how many showers and taps might run at once. In a one-bedroom Eastlakes unit, a smaller system usually does the job; a family in a three-bedroom brick house needs more. We'll ask a few questions about your household and recommend the right size.

What to expect on the day

We give you a time window and let you know when we're on the way. In apartment buildings, tell us about parking, building access, stairs or lifts, and where the hot water system is. We protect floors and stairwells, carry the old system out, install and test the new one, and take the old one away. Most replacements are done in a few hours.

Before you call

  • Is it electric, gas storage, continuous flow or a heat pump?
  • Brand and model, from the label on the unit.
  • Any error code on the controller.
  • Is there no hot water, lukewarm, or a leak?
  • Where is the system: cupboard, balcony, outside wall?
  • A photo of the unit and its label helps.

Heat pumps for Eastlakes brick houses

A heat pump looks like a hot water tank with a small air conditioner unit on top or beside it. It pulls heat from the air into the water, using much less electricity than a standard electric tank. It needs outdoor space with some airflow and should be placed where its fan noise won't bother bedrooms, yours or the neighbours'. Eastlakes' brick houses, with their side passages and backyards, often have a suitable spot.

Signs your system is near the end

  • It's over 10 years old and needs repairs more often.
  • Rust on the base or around the fittings.
  • Brown hot water.
  • Rumbling or popping from sediment.
  • Water pooling under the tank.

If you see these, it's worth getting a replacement quote before it fails, so you can choose the system you want instead of taking whatever is available on the day.

Why Eastlakes systems are failing now

Much of Eastlakes was built from the 1960s, and its hot water systems have been replaced every ten to fifteen years since. In many walk-up blocks, the current tanks went in around the same time and are reaching the end of their lives together. If your neighbours in the block have recently replaced theirs, yours may be close behind. Planning a replacement before the old one fails lets you choose the right system and avoid cold showers.

Hot water and the water bill

A relief valve dripping constantly or a slow leak from a fitting wastes heated water, which costs twice: once for the water and once for the energy. Hot taps that drip do the same. If your gas or power bill has crept up along with the water bill, a hot water leak is worth ruling out.

Questions to ask before replacing

  • Is a repair possible, and what would it cost compared with replacement?
  • Will the new system fit the existing space and connections?
  • For gas, is the gas supply big enough?
  • Will the old system be taken away?
  • What warranty comes with the system and the installation? We give a lifetime labour warranty on our workmanship.

Hot water words explained

  • Element: the heating part inside an electric tank.
  • Thermostat: controls the water temperature.
  • Anode: a rod inside a tank that corrodes instead of the tank.
  • Relief valve: the safety valve on a storage tank.
  • Continuous flow: a unit that heats water as it's used.
  • Heat pump: a system that heats water using heat from the air.
  • Tempering valve: limits the temperature of water to bathrooms.

Moving a hot water system

Sometimes the old spot isn't the best place for a new system. A tank in a hallway cupboard might be better replaced by a continuous flow unit on the balcony, freeing up the cupboard. A gas tank under a bedroom window might be better moved further along the wall. Moving a system means new water, gas or power connections and, for gas, a flue position that meets the rules. In an apartment building, external changes may need the owners corporation's approval. We'll tell you what's possible and what it involves before you decide.

More help in Eastlakes: blocked drains; also gas fitting; also leak detection.

What happens when you call

1

Tell us what's going on

Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.

2

Options and a fixed price first

We find the cause, explain your options and give you a fixed price for each before any work starts.

3

Fixed, tested and backed

We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.

Why Eastlakes homeowners call us

  • Based in Matraville, a few minutes from Eastlakes
  • Rated 5.0 from 110 Google reviews
  • Free quotes, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C)

Hot water questions from Eastlakes homeowners

Can you replace a hot water tank in a unit cupboard?

Yes. We measure the space and access first so the new tank fits.

My continuous flow unit shows an error code. Can you fix it?

Often. Tell us the code, brand and model.

Should I repair or replace my hot water system?

If it's under about 10 years old and the tank is sound, repair is often worth it. Older systems with leaks are usually better replaced.

Can I switch from electric to gas?

If there's a gas supply and space for a unit and flue, often yes.

Is a heat pump suitable for my unit?

Usually not in a small unit; it needs outdoor space. Heat pumps suit brick houses better.

Why does my hot water run out quickly?

A failing element, sediment, a thermostat fault, or a system that's too small for the household.

Why is my relief valve dripping?

Some dripping is normal; constant dripping can mean high pressure or a faulty valve.

What is a tempering valve?

A valve that limits the temperature of hot water to bathrooms so it can't scald.

Do you take the old system away?

Yes.

How long does a replacement take?

Usually a few hours.

Do you give a fixed price?

Yes, before any work starts.

Who looks after a central hot water system?

Usually the owners corporation.

More plumbing in Eastlakes: our Eastlakes plumber page. Nearby: hot water in Rosebery and Mascot. Services: hot water, gas hot water and tempering valves. Guides: relief valve dripping, hot water running out and brown hot water.

Call 0401 758 373Free quote