★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Home › Plumbing tips › Water meter leak test in Pagewood

Your Pagewood water meter: the rules and a simple leak test

To check a Pagewood home for a hidden leak, turn off every tap and water-using appliance, write down the numbers on the water meter, use no water for at least an hour, then read it again. If the numbers have moved, water is escaping somewhere. Keep about 30 cm clear around the meter so it can be read and turned off, and call Scalici Plumbing if the test shows a leak: we find it and give you options and a fixed price before any work starts.

Most Pagewood homeowners only think about the water meter when a bill turns up higher than usual. But that small dial near the front fence is the cheapest leak detector you own. Five minutes with a pen and a bit of patience tells you whether water is running away under the slab, through a toilet or into the sandy ground out the front.

Where to find the meter in a Pagewood home

On the brick and fibro cottages that line streets off Wentworth Avenue and Page Street, the meter is usually in the front garden, a short way inside the front boundary, often beside the path or tucked behind a hedge. On the corner blocks it can be on the side street. Look for a small dial on a short copper or plastic pipe, with a tap handle next to it.

Townhouses and the newer apartment buildings around Pagewood Green are different. Meters are often grouped in a cupboard or a bank near the driveway, and each one should be labelled with a unit number. If the labels have faded, it's worth sorting out before you need to turn your water off in a hurry.

How to read it

Most meters show black numbers for kilolitres (1,000 litres each) and red numbers or small dials for litres. For a leak test you only care about the red numbers, because a small leak moves them first. Some meters also have a little spinning star or triangle that turns whenever water passes through, even a trickle. If that is turning while every tap in the house is off, you have your answer straight away.

The one-hour leak test

  1. Turn off every tap, and make sure the dishwasher, washing machine, garden irrigation and any pool top-up aren't running. Leave the tap at the meter turned on.
  2. Write down all the numbers on the meter, or take a photo on your phone.
  3. Don't use any water for at least an hour. No flushing, no kettle. Overnight works even better.
  4. Read the meter again. If the red numbers have moved, water is going somewhere. The bigger the change, the bigger the leak.

This is the same basic check Sydney Water recommends. A change of a few litres an hour sounds small, but it runs 24 hours a day, every day, until someone fixes it.

Narrowing it down

If the meter moved, a few quick checks tell you where to start looking:

  • Toilets: lay a strip of dry toilet paper across the back of the bowl, under the rim. If it's wet before the next flush, the cistern is leaking through. This is the most common silent leak we find. See taps and toilets in Pagewood.
  • Hot water: check the relief valve pipe on the outside of the system. A steady drip or a pipe that's always wet points to a valve or pressure problem. See relief valve dripping.
  • Front yard: if the house is fine, the pipe between the meter and the house may be leaking. In Pagewood's sandy soil, water can drain away without ever making a wet patch, so a leak here can run for months unnoticed.
  • Under the slab: many post-war Pagewood homes have older copper or galvanised pipes running under a slab or through the subfloor. A warm spot on the floor, a hissing sound or a meter that keeps moving with everything off are all clues. See hidden water leaks.

The meter rules worth knowing

  • The meter isn't yours to fix. Sydney Water owns and looks after the meter itself. The pipes and fittings on your side of it are the owner's responsibility.
  • Keep it clear. Leave about 30 cm of space around it. Don't let a hedge swallow it, and don't put a garden bed or pot plant on top.
  • Don't bury it. No soil, mulch or concrete over the meter or around its pipes. We often find Pagewood meters lost under a new path or driveway after a front yard makeover. See buried water meters.
  • Don't move or remove it yourself. Moving or raising a meter is a job for a licensed plumber. See moving a water meter and the clearance rules.
  • Know how to turn it off. The tap next to the meter shuts the water off to the whole house. Make sure everyone at home knows where it is. See our water shut-off guide.

Found a leak? Here's how we handle it

We start by confirming the leak at the meter, then isolate each part of the plumbing to narrow down where the water is going. For leaks we can't see, we test each section of pipe in turn so we only open up the spot that needs it. Then you get your options and a fixed price before any work starts: a cistern repair, a new valve, a section of new pipe, or re-running an old line if it has had its day. If a hidden leak has pushed up your bill, ask us for the paperwork you need, since Sydney Water may give a hidden leak allowance once a licensed plumber has found and fixed it. More on our leak detection work.

Why Pagewood homeowners call us

  • Based just down the road in Matraville
  • 100+ five-star Google reviews
  • Free quotes on site, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers (Lic. 398171C)

Common questions

How long should I wait when I do a water meter leak test?

Sydney Water suggests using no water for at least an hour between the two readings. Overnight is even better if you can manage it: read the meter last thing at night and again first thing in the morning before anyone flushes or turns on a tap.

The meter moved but I can't see any water. Where could the leak be?

The usual suspects in Pagewood homes are a toilet cistern leaking into the bowl, a hot water relief valve running to the drain, a pipe under the slab or a cracked pipe in the front yard between the meter and the house. Sandy soil soaks up a leak so well that you often never see a wet patch. Testing each part of the system in turn narrows it down.

Who fixes a leak near my water meter?

Sydney Water owns and maintains the meter, and often looks after the pipe from the main up to about a metre inside your boundary. The pipes and fittings on your side, from the meter to the house and everything inside, are the owner's to repair. If you're not sure which side a leak is on, we can check it and tell you before any work is quoted.

Can I build a garden bed or concrete path around my meter?

Keep about 30 cm clear all the way around it, and don't bury it in soil or set concrete around the meter or its pipes. Sydney Water needs to read and swap it, and a buried meter is also hard to turn off in a hurry. If the meter is already boxed in by a path or driveway, it can usually be raised or moved by a licensed plumber.

Read more: our water meter guide, water meter boundary rules and hearing water running. Visit our Pagewood plumber page, or browse more plumbing tips.

Call 0401 758 373Free quote