★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Toilet repairs in Eastlakes 2018

We repair toilets in Eastlakes units and houses: old cisterns that run or refill on their own, weak or double flushes, pan seals and connectors leaking to the unit below, sticking buttons, blocked toilets, concealed cisterns behind flush plates and full replacements. We find the cause, give you options to repair or replace with a fixed price for each before any work starts, and back the work with our lifetime labour warranty.

Many Eastlakes walk-ups are from the 1960s and 70s, and their old cisterns are reaching the end of their life. A toilet that runs wastes water day and night, and in a walk-up a pan seal that weeps a little each flush can stain the ceiling of the unit below. The red-brick houses have older suites and seized stop taps, and in the newer apartments it's concealed cisterns behind a flush plate. We're a few minutes away in Matraville, and toilet repairs are one of our most common jobs here.

Toilet problems we fix

Running cisterns

Worn flush valve seals and inlet valves replaced so the cistern stops running.

Slow or no refill

Inlet valves cleaned or replaced, and stop taps checked.

Weak or double flushes

Buttons, cables and flush valves adjusted or replaced.

Leaks at the pan

Pan connectors, seals and wall connections replaced.

Blocked toilets

Blockages cleared and the drain checked if it keeps happening.

New toilet suites

Old toilets replaced with water-efficient suites that fit the set-out.

Signs your toilet needs a plumber

  • Water trickles into the bowl after the cistern has filled.
  • The cistern refills on its own every so often.
  • It takes ages to fill after a flush.
  • You have to hold the button or press it twice.
  • Water around the base or behind the pan.
  • The bowl drains slowly or the water rises high when you flush.
  • Gurgling when other fixtures drain.
  • The seat or pan moves when you sit on it.

Why toilets fail in Eastlakes homes

Toilets from past updates

Many Eastlakes bathrooms were updated in the 1980s, 1990s or 2000s. The toilets from those updates are now 20 to 40 years old. Their rubber seals have hardened, inlet valves have worn, and buttons have stiffened. Most can be repaired with new valves, but some older cisterns use parts that are no longer made.

Pan connectors

The pan connector joins the toilet to the drain. In older Eastlakes homes, this is sometimes a rubber connector that has perished, or a mortar joint that has cracked. A leaking connector lets water and smells out at the back of the pan. Replacing it means removing and resetting the toilet.

Loose pans

A toilet that rocks on the floor can break the seal at the connector and crack the floor tiles around it. Pans are usually held down with screws into the floor; when those rust or the floor moves, the pan comes loose. We re-fix the pan and replace the seal.

Water pressure

Ground-floor units and homes close to the main can have higher water pressure, which wears inlet valves faster and can cause the cistern to hiss or fill noisily. A pressure limiting valve after the meter protects the whole home. See pressure limiting valves.

Drain problems

If a toilet drains slowly or keeps blocking, the problem is often in the drain rather than the toilet. Old clay sewers in Eastlakes have roots and displaced joints that catch paper. See blocked drains in Eastlakes.

Eastlakes homes and their toilets

Home typeTypical toiletsCommon faults
1960s and 70s walk-upsClose-coupled suites from past updatesRunning cisterns, pan seals leaking to the unit below
Brick housesOlder suites, some original-style cisternsWorn valves, perished connectors, outside toilets
Former Brick houses with updated bathroomsBasic suites, some replacedParts hard to find, loose pans
Newer homes and apartmentsConcealed cisterns, wall-faced pansIn-wall valves, flush plate buttons

How we repair a toilet

  1. Ask what's happening, and for a photo of the toilet and flush button.
  2. Turn off the water at the stop tap.
  3. Find the cause: inlet valve, flush valve, button, connector, seal or drain.
  4. Give you options to repair or replace, each with a fixed price.
  5. Repair or replace with quality parts.
  6. Test it: several flushes, a leak check and a check of the fill level.

Repair or replace?

ProblemUsually a repairUsually a replacement
Running cisternNew flush and inlet valvesCistern with no parts available
Leak at the back of the panNew pan connectorCracked pan
Loose panRe-fix and resealDamaged pan base
Weak flushAdjust or replace the button and valveOld single-flush cistern
Cracked cisternNot repairableNew cistern or suite

What affects the cost

  • The fault and whether parts are in the van.
  • The toilet's age and brand.
  • Concealed cisterns need brand-specific parts.
  • Resetting the pan takes more time than a valve change.
  • A new suite: depends on the model and the set-out.

You get a fixed price before any work starts.

Who's responsible?

  • You: the toilet, cistern, stop tap and connector inside your home.
  • Owners corporation: shared stacks and drains in an apartment building.
  • Sydney Water: the sewer main.

Quick checks you can do

  1. Food colouring test: a few drops in the cistern, no flushing for 20 minutes. Colour in the bowl means the flush valve is leaking.
  2. Lift the cistern lid and see whether water is running down the overflow pipe. That points to the inlet valve.
  3. Dry the base with a towel, flush a few times, and look for water.
  4. Check the stop tap behind the toilet is fully open.
  5. Rock the pan gently to see if it's loose.

Signs it's urgent and when it can wait

  • Call straight away if the toilet is overflowing, sewage is coming up, or water is reaching the unit below.
  • Call soon if it's your only toilet and it won't flush, or it leaks at the base.
  • Book a time if the cistern runs or the button sticks.

A recent toilet repair nearby

Here's a recent toilet repair nearby in Chifley.

Toilet leaking at the back repaired, Chifley (nearby)

The problem: a toilet in a Chifley home was leaking at the back.

What we did: we tracked down where the water was getting out and repaired the leak at the back of the toilet.

The result: the toilet works without leaking and the floor stays dry.

Leaking toilet before repair, near Eastlakes
Before, Chifley
Toilet after repair, near Eastlakes
After the repair

“Best plumber in Matraville. Unblocked my drains efficiently!”

C S, Matraville (Google review)

More local work is on our recent projects page.

Toilet repairs across Eastlakes

  • The walk-up unit streets: close-coupled suites and old cisterns in 1960s and 70s blocks, often above another unit.
  • The brick house streets: older suites, and the odd outside toilet still in use.
  • Around the Evans Avenue shops: newer apartments with concealed cisterns.
  • Near The Lakes Golf Club: houses where slow flushes often point to a settled sewer.
  • Towards Rosebery and Daceyville: older homes with seized stop taps.

How a toilet cistern works

Knowing the basics helps you describe the problem and decide whether to call. When you press the button, it lifts the flush valve, a large seal at the bottom of the cistern. Water rushes into the bowl and the cistern empties. The flush valve drops back onto its seat and seals. As the water level falls, the float on the inlet valve drops, opening the valve to let water in from the supply. When the water reaches the right level, the float rises and shuts the inlet valve. If any part of this doesn't work properly, you get a running cistern, a slow fill, a weak flush or a cistern that won't stop filling.

Water running down the overflow pipe, the tube in the middle of the cistern, means the inlet valve isn't shutting off. Water slipping past the flush valve seal shows up as a trickle in the bowl or a cistern that refills every so often. A button that doesn't lift the valve high enough gives a weak flush. Each has a different fix, which is why we check before ordering parts.

Running toilets and your water use

A running toilet is one of the most common causes of wasted water in a home. Even a small trickle into the bowl runs day and night. A badly running cistern can waste far more than everything else in the home put together. In a Eastlakes brick house, that shows up on your own water bill. In a walk-up block on a shared meter, it's spread across all the owners, so it can go unnoticed for a long time. If you can hear the cistern hissing, see a ripple in the bowl, or notice the cistern refilling when nobody has used it, it's worth getting it fixed.

Toilets in upstairs units

In Eastlakes' three-storey walk-ups, your bathroom is usually directly above the bathroom of the unit below. The toilet sits on the floor slab, and the drain runs down through the slab to the stack. If the pan connector leaks, or the pan has worked loose and the seal has broken, water can track along the slab and into the ceiling below. The first sign is often a brown stain on your neighbour's bathroom ceiling. If a neighbour mentions a stain, dry the base of your toilet, flush a few times and look carefully at the back of the pan. If you see water, turn the stop tap off between uses and call us.

When we repair a toilet in an upstairs unit, we reset the pan with a new connector and seal, fix it securely to the floor, and test with several flushes while checking for any sign of water. If the neighbour's ceiling needs checking, we'll do that too, and give you a short note of what we found and fixed.

Concealed cisterns

Newer apartments near the Evans Avenue shops and some updated bathrooms in Eastlakes have concealed cisterns, where the cistern is hidden inside the wall and you flush with a plate or buttons on the wall. They look tidy, but they can seem daunting when something goes wrong. In most cases, the flush plate lifts or unclips to give access to the valves inside. With the right parts for the brand, we can replace the inlet valve, the flush valve and the button mechanism without touching the tiles. A photo of the flush plate before we come helps us bring the right parts.

Blocked toilets

A blocked toilet is usually caused by too much paper at once, wipes, sanitary items, or something dropped in by a child. A plunger designed for toilets clears many blockages. If it doesn't, or the toilet blocks often, call us. We clear the blockage with the right tools, and if it keeps happening we'll check the drain with a camera. In older Eastlakes homes, roots and displaced joints in the clay sewer often cause repeat blockages that only show up at the toilet. Never use caustic drain cleaners in a toilet; they rarely work on paper blockages and can damage the pan and pipes.

Old toilets and new suites

If your toilet is old, has a single flush, uses a lot of water, or keeps needing repairs, a new suite may be better value than another repair. Modern dual-flush toilets use a fraction of the water of older single-flush models, and they're easier to keep clean. When choosing a new toilet, the most important measurement is the set-out: the distance from the wall to the centre of the floor waste, or the height of the wall waste. Choosing a suite that matches your set-out means it can be fitted without changing the floor or the drain. We can measure it for you and suggest suites that will fit.

  • Close-coupled: the cistern sits on the pan. The most common choice.
  • Wall-faced: the pan sits flush against the wall, hiding the connector. Easier to clean.
  • Back-to-wall with a concealed cistern: the tidiest look, but needs space in the wall.
  • Taller pans: easier to sit on and get up from, which suits older family members.

Outside and second toilets

Some Eastlakes brick houses still have an outside toilet, or a second toilet added in the laundry or on an enclosed verandah. These often get less use and less attention, so their valves can seize and their seals dry out. If you have one, flush it every week or two to keep the seals wet and the trap full, which also stops sewer smells. If it's rarely used and starting to leak, it's worth repairing or replacing before it causes damp or damage.

Noisy toilets

Some toilets make a loud hiss, whistle or bang when they fill. Older float-arm valves and worn inlet valves are the usual cause, especially where water pressure is high. A bang when the valve shuts off can be water hammer travelling through the pipes. Replacing the inlet valve with a modern quiet-fill valve usually solves the noise, and a pressure limiting valve helps if the pressure is high everywhere in the home. In an apartment building, a noisy cistern at night can be heard by neighbours, so it's worth fixing.

Sewer smells near the toilet

A sewer smell in the bathroom, especially near the toilet, can come from a leaking pan connector, a cracked seal under the pan, or a dry trap in a floor waste nearby. In older Eastlakes homes, it can also come from a cracked drain under the floor or a vent pipe problem. We check the connector and seal first, then the floor waste, then the drain and vent if needed. Fixing the cause stops the smell for good, rather than masking it. See sewer vent pipes.

Toilet seats and buttons

Loose or broken seats are a small thing, but they're annoying and can make the pan shift. Replacing a seat is quick, and we can match most suites. Push buttons and flush plates also wear out; the plastic cracks, the spring weakens, or the cable stretches. Most can be replaced on their own without replacing the cistern. We carry common buttons in the van and can order the right one for less common brands.

Why we check the whole toilet

When we're called out for one toilet problem, we check the rest of the toilet too: the stop tap, the hose, the pan connector, the seat fixings and the flush. It only takes a few minutes, and it often finds something that's close to failing. That way, you're not calling us back a few weeks later for a different fault on the same toilet. We'll tell you what we found and let you decide what to do now and what to leave.

Toilets for older family members

Many Eastlakes households include older parents or grandparents, and a standard-height toilet can be hard to sit on and get up from. A taller pan, sometimes called a comfort-height or ambulant pan, sits a few centimetres higher and makes a real difference. Grab rails beside the toilet help too, fixed securely into the wall framing or masonry. Soft-close seats, easy-press buttons and good lighting all help. If you're replacing a toilet anyway, it's worth thinking about who will use it in the years ahead. We can suggest suites that fit your existing set-out, so no floor or wall work is needed.

Getting ready for our visit

  • Send a photo of the toilet, the button and the inside of the cistern if you can.
  • Note the brand, usually printed inside the cistern or on the pan.
  • Clear the area around the toilet so we can work.
  • Tell us about access: stairs, parking and any building rules on work hours.
  • Mention anything else you'd like looked at while we're there.

The more we know before we arrive, the more likely we can finish the job in one visit with parts from the van.

Repairs that last

We use quality valves and seals that suit your cistern, not the cheapest universal parts. When we reset a pan, we use a new connector and seal and fix the pan securely, so it doesn't work loose again. When we replace a valve, we set the water level and flush volume correctly, so the toilet flushes well without wasting water. Every repair is tested before we leave, and our labour is covered by a lifetime warranty. If something we fixed fails, we come back and make it right.

Looking after your toilet

  • Only flush toilet paper. Wipes, even 'flushable' ones, cause blockages.
  • Avoid drop-in cistern tablets; they can damage seals and valves.
  • Do the food colouring test twice a year.
  • Check the stop tap and hose behind the toilet for rust or drips.
  • Clean with mild cleaners; harsh chemicals can damage seals.
  • Flush rarely used toilets every week or two.

What to expect on the day

We give you a time window and let you know when we're on the way. Most toilet repairs are done in one visit with parts from the van. We protect the floor, turn off the water, find the fault and explain your options before we start. Once it's repaired, we test it with several flushes and check for leaks. If we notice anything else close to needing attention, such as a rusty hose or a seized stop tap, we'll point it out.

Toilet words explained

  • Cistern: the tank that holds the flush water.
  • Pan: the bowl you sit on.
  • Inlet valve: refills the cistern after a flush.
  • Flush valve: holds water in the cistern and releases it when you flush.
  • Pan connector: joins the pan to the drain.
  • Set-out: the distance from the wall to the centre of the drain, used to choose a new toilet.
  • Stop tap: the small valve that turns off water to the toilet.

What happens when you call

1

Tell us what's going on

Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.

2

Options and a fixed price first

We find the cause, explain your options and give you a fixed price for each before any work starts.

3

Fixed, tested and backed

We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.

Why Eastlakes homeowners call us

  • Based in Matraville, a few minutes from Eastlakes
  • Rated 5.0 from 110 Google reviews
  • Free quotes, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C)

Toilet questions from Eastlakes homeowners

Why does my toilet keep running?

Usually a worn flush valve seal or inlet valve. Both are quick to replace.

Why does my cistern refill on its own?

Water is slipping into the bowl through a worn flush valve seal.

Why is my toilet leaking at the back?

Often a perished pan connector or a loose pan.

Can you fix a concealed cistern?

Yes, through the flush plate, with the right parts for the brand.

My toilet keeps blocking. Is it the toilet?

Often it's the drain. We check both.

Can you replace my toilet?

Yes, with a suite that fits your set-out.

How long does a repair take?

Most valve repairs take under an hour.

Do you carry parts?

Yes, common valves, buttons and connectors are in the van.

Is a running toilet costly?

It can waste a lot of water over time, so it's worth fixing.

What's the food colouring test?

A few drops in the cistern and no flushing for 20 minutes. Colour in the bowl means a leak.

Can a leaking toilet damage the unit below?

Yes, so a leak at the base in a unit is worth fixing quickly.

What warranty do I get?

Our workmanship carries a lifetime labour warranty.

More plumbing in Eastlakes: our Eastlakes plumber page, taps and toilets, blocked drains and leak detection. Nearby: toilet repair in Rosebery and Mascot. Guides: leaking toilet and running toilets and dripping taps.

Call 0401 758 373Free quote