Tap repairs in Kensington 2033
Kensington's older bathrooms have worn washers, cartridges and seals, and in homes this age the taps have often been patched over the decades. Many Federation and interwar houses still have galvanised pipe that sends rust into the taps, and in a terrace the kitchen and bathroom taps sit at the end of a long run from the meter, so weak flow at the back is common. We come up from Matraville, fix the tap properly the first time, and give you a fixed price before we start.
Tap repairs we do in Kensington
Dripping washer taps
Washers replaced and worn seats re-cut so the tap shuts off properly.
Leaking mixers
Cartridges and O-rings replaced in kitchen, basin and shower mixers.
Period tapware
Taps in Federation and interwar homes repaired with matching parts where we can.
Low flow at the back
Weak taps at the back of terraces traced to aerators, valves or old pipe.
Garden and laundry taps
Leaking, stiff and seized taps freed up or replaced.
New tapware
Old taps removed and new ones fitted and tested.
Signs a tap needs repair
- It drips after you turn it off, or you have to force it to stop.
- Water leaks around the handle or from the base of a mixer.
- The handle is stiff, loose or turns without shutting off.
- The flow is weak, or it splutters.
- The tap bangs or shudders when you turn it off.
- Water stains or damp under the sink or behind the shower wall.
- The outdoor tap is pitted or green and won't turn.
Why taps fail in Kensington homes
Old galvanised pipe
Many Kensington homes still have galvanised steel water pipe. It rusts inside, and flakes of rust travel to the taps, where they score washers, seats and cartridges. A tap that keeps dripping soon after a repair is often a sign of old pipe upstream.
Decades of repairs
In homes this age, taps have often been repaired and replaced many times, sometimes with parts that don't quite match. Over-tightened handles, mismatched washers and worn spindles all shorten the life of a tap.
Worn washers and seats
Older washer taps close by pressing a rubber washer onto a brass seat. Over time the washer hardens and the seat wears, and a new washer alone won't stop the drip. The seat needs re-cutting so the washer can seal again.
Old mixers
Mixer taps use a cartridge to control flow and temperature. When the cartridge or its O-rings wear, the tap drips from the spout or leaks around the base. Parts for older mixers can be hard to find, which is when a new tap is often the better choice.
Long runs and pressure
In a terrace, the kitchen and bathroom taps are at the end of a long run from the meter. Flow can be weak at the back while pressure at the front is high. High pressure is hard on washers, cartridges and flexi hoses and can make taps bang when they shut. We can check the pressure and fit a pressure limiting valve if it's too high.
Kensington homes and their taps
| Home type | Typical taps | Common faults |
|---|---|---|
| Terraces and semis | Washer taps and later mixers, long pipe runs | Weak flow at the back, worn seats |
| Federation and interwar houses | Wall-mounted bath and laundry taps, period tapware | Worn seats, leaking spindles, old pipe |
| Older unit blocks | Original washer taps, some mixers | Dripping washers, leaks into the unit below |
| Newer apartments | Mixers throughout | Worn cartridges, leaking bases |
| Shared houses near UNSW | Heavily used kitchen and bathroom taps | Worn cartridges, loose handles |
How we repair a tap
- Ask what's happening: dripping, leaking, stiff, loose or weak.
- Turn off the water at the isolating valve or the main.
- Take the tap apart and check the washer, seat, spindle or cartridge.
- Give you options to repair, convert or replace, each with a fixed price, before any work starts.
- Fix it, usually with parts from the van.
- Turn the water back on and test it for drips and leaks.
Repair, convert or replace?
| Problem | Usual fix |
|---|---|
| Washer tap dripping | New washer and re-cut seat |
| Washer tap worn out | Convert to quarter-turn ceramic disc |
| Mixer dripping from spout | Replace the cartridge |
| Mixer leaking at the base | Replace the O-rings or the tap |
| Garden tap seized or pitted | Free it up or replace it |
| Weak flow at one tap | Clean the aerator, check the valve, or replace the tap |
What affects the cost
- The type of tap: washer, mixer, wall-mounted or outdoor.
- Parts, especially for older or less common taps.
- How many taps we fix on the same visit.
- Access, for example taps in tiled walls.
- New tapware if a repair won't last.
You get a fixed price for each option before any work starts.
Who's responsible?
- You: the taps, mixers and pipes inside your home and on your property.
- Owners corporation: shared water pipes in a block of flats.
- Sydney Water: the water main and meter.
Signs it's urgent and when it can wait
- Call straight away if a tap won't turn off, or water is leaking behind a wall or under the floor.
- Call soon if there's damp under the sink or a stain in the flat below.
- Book a time if a tap drips, is stiff or the flow is weak.
A recent tap repair nearby
Here's a recent job nearby in Maroubra, just down the coast, where leaking taps were fixed on the same visit as a drain clear.
Leaking taps fixed during a drain clear, Maroubra (nearby)
The problem: a Maroubra home had leaking taps as well as slow drains.
What we did: we laid a mat to protect the floor, jetted the drains and floor wastes clear, and then repaired the leaking taps on the same visit.
The result: the taps shut off properly and the drains flow freely, all in one visit.


More local work is on our recent projects page.
“Great plumber, fixed my leaking taps quickly and at a great price!”
Tom (Google review)
Tap repairs across Kensington
- On the side streets: terraces and semis with weak flow at the back taps.
- Towards Moore Park and Centennial Park: Federation and interwar houses with period tapware.
- Along Anzac Parade and the light rail: unit blocks where a leaking tap can affect the unit below.
- Near UNSW: shared houses with hard-working kitchen taps.
- Newer apartments: mixers in kitchens, bathrooms and laundries.
Weak flow at the back of a terrace
A common Kensington complaint is a good flow at the front tap and a weak one at the back, in the kitchen, bathroom or laundry of a terrace. The cause can be a blocked aerator, a part-closed valve, a worn tap, or old galvanised pipe that has narrowed with rust along the long run from the meter. We start at the tap, check the aerator and valve, then test the pressure at the meter and at the back. If the pipe is the problem, we'll give you options to replace the worst sections or the whole run. See our galvanised pipes guide.
Garden taps
Garden taps on older Kensington homes are often decades old. The spindle seizes, the washer perishes in the sun and the tap leaks at the spindle or won't turn off fully, wasting water and soaking the wall or ground beside the house. We free up or replace the tap, and fit a hose tap with a vacuum breaker where needed so garden water can't siphon back into the supply.
Period tapware
Many Kensington Federation and interwar homes still have their original or period-style taps, and owners often want to keep them because they suit the house. Most older taps can be repaired: new washers, re-cut seats, new spindle O-rings and gland packing. Where parts are hard to find, we look for compatible ones or suggest period-style replacements that keep the look. See ceramic disc vs washer taps.
Shower taps in old walls
In older bathrooms, the shower taps are set into the wall, with the valve bodies behind the tiles. When a shower tap drips, the washer or seat is usually the cause, and we can fix it from the front without removing tiles. If water is leaking behind the wall, you might see damp, lifting tiles or a stain in the room next door or the unit below. We check the tap body and connections and tell you what we find. See leak detection in Kensington.
Kitchen mixers
Kitchen mixers get used more than any other tap. When the cartridge wears, the tap drips from the spout or is hard to set to the right temperature. When the O-rings wear, water leaks around the base or under the sink. We replace the cartridge or O-rings if parts are available, or fit a new mixer. See mixer tap leaking at the base.
Basin taps
Basin taps and mixers are smaller, but the faults are the same: worn washers, cartridges or O-rings. A dripping basin tap stains the basin and wastes water. We repair or replace it, and check the flexible hoses under the basin while we're there, because old hoses can burst without warning.
Laundry taps
Laundry taps in Kensington homes are often in a back extension or a corner of a small laundry. They can drip, leak at the spindle or have washing machine stops that won't turn off. We repair or replace them, and fit new washing machine hoses if the old ones are bulging or cracked.
Washer taps: repair them properly
A dripping washer tap usually needs more than a new washer. Over the years, the brass seat inside the tap wears unevenly, so a new washer can't seal against it. We re-cut the seat to make it flat and smooth again, then fit a new washer. That's why our washer tap repairs last, rather than dripping again a few weeks later.
Converting to quarter-turn
If you'd prefer taps that turn on and off with a quarter-turn and don't need washers, many washer taps can be converted with a ceramic disc cartridge that fits the existing tap body. It's a good option when the tap looks fine but keeps dripping. We'll tell you if your taps can be converted.
Choosing new tapware
If a repair won't last, or you'd like a change, we can fit new tapware. We'll check what fits your basin, sink or wall, and help you choose taps that suit your home, whether that's a period style for a Federation bathroom or a modern mixer for a unit kitchen. We fit the new taps, connect them and test for leaks.
Low flow at a tap
If one tap has weak flow, the aerator on the spout may be blocked with grit or scale. Cleaning or replacing it usually fixes it. If several taps are weak, the problem may be in the pipes, such as old galvanised pipe that has narrowed inside, or a part-closed valve. We find the cause and tell you your options.
Dripping taps and your water bill
A dripping tap can waste a surprising amount of water over a year. A leaking garden tap can be worse, because it often goes unnoticed. Fixing it is usually a quick job, and it stops the drip that keeps you awake at night.
Taps in unit blocks
In Kensington's unit blocks, the taps inside your unit are usually yours, but the water pipes in the walls and ceilings may be shared. A leak from a tap or hose in your kitchen or bathroom can show in the unit below. We fix the tap and check the connections, and give you a note to pass on if the leak is in a shared pipe.
Taps that bang or shudder
A bang when you turn off a tap is called water hammer. It usually happens with high pressure or quick-closing taps. It can loosen pipes and joints over time. We check the pressure and fit a pressure limiting valve or water hammer arrestor if needed.
Hot taps that run cold, or cold taps that run warm
If a hot tap runs cold, or a cold tap runs warm, the mixer cartridge or a check valve may be faulty, letting hot and cold water cross over. It can also be a problem with the hot water system. We check the tap first, then look further if needed. See hot water in Kensington.
Isolating valves under the sink
Isolating valves under the sink or basin let you turn off the water to one tap without shutting off the whole house. Older homes often don't have them, or have ones that have seized. We can fit new isolating valves while we're there, which makes the next repair easier.
Getting ready for our visit
- Clear the area under the sink or around the tap.
- Tell us where the water main is, if you know.
- Make a list of every tap that needs attention.
- Tell us about parking and access, including rear lanes behind terraces.
Looking after your taps
- Don't force taps closed; it wears the washer and seat.
- Turn garden taps on and off now and then so they don't seize.
- Clean aerators every few months, especially on old pipe.
- Fix drips early, before they wear the seat.
- Have old galvanised pipe checked if taps keep wearing out.
What to expect on the day
We arrive in the window we agreed, ask what's been happening and check the taps. We explain what we found and give you options with a fixed price for each. If you're happy, we do the work, usually with parts from the van, test each tap and clean up before we leave.
Wall-mounted bath sets
Older Kensington bathrooms often have a wall-mounted bath set with taps and a spout. The washers and seats wear like any washer tap. We repair them from the front, or replace them with a new set that fits the existing wall connections where we can.
Taps in shared houses near UNSW
A Kensington house shared by several people works its taps hard, especially in the kitchen and bathroom. Washers and cartridges wear faster and handles get loose. A check at the start of the year can save a drip turning into a leak mid-semester.
Taps for every age
Lever taps are easier to use than round handles for anyone with stiff hands. We can fit lever taps or mixers in the kitchen, bathroom and laundry, and set the hot water temperature to help prevent scalding.
Why our tap repairs last
We re-cut seats, use quality parts and test every tap before we leave. Our workmanship carries a lifetime labour warranty.
Why Kensington homeowners call us
We come up from Matraville and know what old pipe and decades of repairs do to taps in Kensington's terraces, Federation homes and units. We fix the tap properly, explain your options in plain language and give you a fixed price before we start.
Taps and old galvanised pipe
Some older Kensington homes still have galvanised steel water pipe. It rusts inside, which can reduce flow and send rust flakes into tap washers and cartridges. If your taps keep wearing out, or the water is discoloured, the pipe may be the cause. We can tell you if it's time to replace it.
Small jobs worth doing together
If we're fixing one tap, it's often worth doing the others at the same time, along with a running toilet or a leaking hose. We'll check everything you list and give you a fixed price for all of it.
Flexible hoses under sinks and basins
Most modern taps connect to the water pipes with braided flexible hoses. They don't last forever. The braid can rust in damp cupboards and the rubber inside can perish. A failed hose can release a lot of water quickly, and in a unit that water goes straight to the floor below. Signs to look for are rust spots on the braid, bulges, kinks or damp at the fittings. When we fix a tap, we check the hoses and replace any that look tired.
Taps after a long time away
If a Kensington home or unit has been empty for a while, washers and O-rings can dry out and leak when the taps are used again, and rust from old pipe can collect in aerators. Run each tap for a minute when you get back and check under sinks for drips. If a tap leaks or the flow is poor, it's usually a quick repair.
When a tap won't turn off
If a tap won't turn off, don't keep forcing the handle, as that can strip the spindle. Turn off the isolating valve under the sink or basin if there is one. If not, turn off the water at the main, usually near the meter at the front of the property. In a flat, the shut-off valve may be in a cupboard, in the hallway or in a meter room. Then call us, and we'll fix the tap and fit an isolating valve so it's easier next time.
Kitchen taps that see the most use
In a busy Kensington household, the kitchen tap is turned on and off dozens of times a day. Mixer cartridges wear, the swivel spout starts to leak at the base and the hose under the sink takes the strain every time the spout moves. A new cartridge or O-rings often fix it; if the mixer is old or parts are hard to get, a new mixer is usually the better choice.
Tap words explained
- Washer: the rubber disc that seals a washer tap.
- Seat: the brass surface inside the tap the washer presses against.
- Spindle: the part that turns when you turn the handle.
- Cartridge: the part inside a mixer that controls flow and temperature.
- Aerator: the mesh at the end of the spout.
- Isolating valve: a small valve that turns off the water to one tap.
- Vacuum breaker: a fitting on a hose tap that stops water flowing back into the supply.
What happens when you call
Tell us what's going on
Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.
Options and a fixed price first
We find the cause, explain your options and give you a fixed price for each before any work starts.
Fixed, tested and backed
We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.
Jobs we finished recently


Why Kensington homeowners call us
- Based in Matraville, a short drive from Matraville
- Rated 5.0 from 110 Google reviews
- Free quotes, with options and a fixed price before any work starts
- Lifetime labour warranty on our workmanship
- Licensed plumbers, drainers and gasfitters (Lic. 398171C)
Tap questions from Kensington homeowners
Why does my tap still drip after a new washer?
The seat is probably worn. We re-cut it so the new washer can seal.
Can you repair my original period taps?
Usually, yes. We replace washers, re-cut seats and replace O-rings, and look for compatible parts.
Why is the flow weak at the back of my terrace?
Often a blocked aerator, a part-closed valve or old galvanised pipe. We test it.
Can you fix a dripping mixer?
Yes, usually by replacing the cartridge or O-rings.
Can you repair a shower tap without removing tiles?
Usually, yes. Most shower taps are repaired from the front.
Can washer taps be converted to quarter-turn?
Many can, with a ceramic disc cartridge that fits the existing body.
Why is my tap so stiff?
Usually a worn spindle or dry O-rings.
Can you fix my garden tap?
Yes. We free it up if we can, or replace it.
Do I need to turn off all the water?
Only if there's no isolating valve. We can fit one.
How long does a tap repair take?
Most take under an hour.
Can you do several taps in one visit?
Yes, and it's often worth doing them together.
What warranty do I get?
Our workmanship carries a lifetime labour warranty.
More plumbing in Kensington: our Kensington plumber page, taps and toilets, toilet repair and leak detection. Nearby: tap repair in Randwick and Coogee. Guides: mixer tap leaking and ceramic disc vs washer taps.