★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Tap repairs in Randwick 2031

We repair and replace taps in Randwick homes: dripping washer taps, period and heritage tapware, leaking kitchen and basin mixers, shower taps leaking behind tiles, laundry and garden taps, stiff or loose handles and low flow. We re-cut worn tap seats, replace cartridges, O-rings and spindles, and fit new tapware when a repair won't last. You get options and a fixed price before any work starts, backed by our lifetime labour warranty.

Randwick homes are full of taps with history: cross-handle basin taps in Federation bathrooms, wall-mounted bath sets in terraces, old brass laundry taps, and the mixers that went in during later updates. Many owners want to keep the character of their tapware while stopping the drip. Most period taps can be repaired properly, with new washers, re-cut seats and new spindles. We come up from Matraville and repair taps across Randwick, usually in one visit.

Tap repairs we do

Dripping washer taps

New washers and re-cut seats so the tap shuts off cleanly.

Period and heritage taps

Original and reproduction tapware repaired to work smoothly.

Leaking mixers

Cartridges, O-rings and seals replaced, or the mixer replaced.

Shower taps

Spindles and cartridges replaced from the front, usually without removing tiles.

Laundry and garden taps

Stiff, seized and dripping taps repaired or replaced.

New tapware

Taps and mixers supplied and fitted, including period styles.

Signs a tap needs repair

  • Drips from the spout after it's turned off.
  • Water at the handle or around the base.
  • Hard to turn, or needs a lot of force to stop.
  • Spins without stopping the water.
  • Squeals or shudders when turned on.
  • Low flow or a spluttering stream.
  • A loose handle or cross-head.
  • Damp in the cupboard under a sink or vanity.

Why taps fail in Randwick homes

Washer taps

Traditional washer taps close by pressing a rubber washer onto a brass seat. Over the years, the washer hardens and the seat wears a groove. A new washer on a worn seat drips again soon, which is why we re-cut the seat as part of the repair. Many Randwick terraces and Federation houses still have washer taps in the bathroom, laundry and garden.

Old galvanised pipe

Rust and grit from old galvanised pipe wash through and wear washers, seats and cartridges faster, and block aerators. See galvanised pipes.

Mixer cartridges

Mixers use a cartridge to control flow and temperature. After 10 to 20 years, the cartridge wears or its seals perish, and the mixer drips or stiffens.

Shower taps in old walls

Shower tap bodies in older homes sit deep in brick or plaster walls. Spindle seals fail with age, and water can leak into the wall every time the shower runs.

Water pressure

High pressure wears washers and cartridges faster and can make taps bang when they shut. A pressure limiting valve protects every tap.

Randwick homes and their taps

Home typeTypical tapsCommon faults
Terraces and semisWasher taps, wall-mounted bath setsWorn seats, stiff spindles, shower taps leaking in walls
Federation housesPeriod cross-handle taps, later mixersWorn spindles, mixed old and new fittings
Interwar flatsMix of washer taps and mixersDrips, leaks to the flat below, no isolating valves
Newer homes and unitsImported mixersCartridges, hard-to-find parts

How we repair a tap

  1. Ask what's happening, and for a photo and any brand name.
  2. Turn off the water at the isolating valve or meter.
  3. Take the tap apart and find the worn part.
  4. Give you options: repair, convert or replace, each with a fixed price.
  5. Repair it properly: re-cut seats, new washers, O-rings, spindles or cartridges.
  6. Test it for drips, leaks and smooth operation.

Repair, convert or replace?

SituationUsually best
Washer tap with a sound bodyRepair with a new washer and re-cut seat
Period tap you want to keepRepair, or fit a conversion spindle that suits the body
Washer taps you'd like easier to useConvert to quarter-turn ceramic spindles
Mixer dripping, cartridge availableNew cartridge
Corroded or cracked tap bodyReplace the tap

What affects the cost

  • The type of tap and whether parts are available.
  • How many taps are done in one visit.
  • Access: shower taps deep in walls, tight vanities.
  • Isolation: whether there are working isolating valves.
  • New tapware: depends on the model.

You get a fixed price before any work starts.

Who's responsible?

  • You: taps, mixers and isolating valves in your home.
  • Owners corporation: shared pipes and common-area taps in a block of flats.
  • Sydney Water: the supply up to the meter.

Signs it's urgent and when it can wait

  • Call straight away if a tap won't turn off, or water is leaking into a wall or the flat below.
  • Call soon if a shower tap leaks behind the tiles or a tap leaks at the base into the cupboard.
  • Book a time if a tap drips or is stiff.

A recent tap repair nearby

Here's a recent tap repair nearby in Maroubra, done on the same visit as a drain clear.

Leaking taps fixed during a drain clear, Maroubra (nearby)

The problem: a Maroubra home had leaking taps as well as slow drains.

What we did: we laid a mat to protect the floor, jetted the drains and floor wastes clear, and then repaired the leaking taps on the same visit.

The result: the taps shut off properly and the drains flow freely, all in one visit.

Floor protected during tap repairs near Randwick
Floor protected, Maroubra
Drain jetting on the same visit as tap repairs near Randwick
Drains cleared on the same visit

“Great plumber, fixed my leaking taps quickly and at a great price!”

Tom (Google review)

More local work is on our recent projects page.

Tap repairs across Randwick

  • Around the Junction: units and newer homes with imported mixers.
  • Near the hospital and university: walk-up flats and shared houses with heavily used taps.
  • Towards Centennial Park and the racecourse: Federation houses with period tapware.
  • On the slopes towards Coogee and Clovelly: terraces with wall-mounted bath and shower taps.
  • In the heritage conservation areas: homes where owners want to keep original taps.

Period and heritage tapware

Cross-handle basin taps, wall-mounted bath sets with a central spout, old brass laundry taps and garden bib taps are part of the character of many Randwick homes. Most can be repaired rather than replaced. We take the tap apart, fit a new washer, re-cut the seat so it's smooth and flat, replace the spindle O-rings, and clean and lubricate the spindle so the head turns easily. If the original spindle is worn beyond repair, we look for a replacement that fits the body, or a ceramic disc conversion spindle that keeps the look while making the tap easier to use. If a tap body is cracked or corroded through, reproduction period tapware is available that suits the bathroom.

Shower taps in old walls

In older Randwick bathrooms, shower tap bodies sit deep in brick or plaster walls, sometimes behind original tiles. When a spindle seal fails, water leaks into the wall every time the shower runs. Signs include damp skirting boards on the other side of the wall, loose or drummy tiles, mould along the grout or a musty smell. Most repairs are done from the front with extension pieces where the body sits deep, so the tiles stay where they are. If the body itself is leaking inside the wall, we'll explain the options before anything is opened. See leak detection in Randwick.

Kitchen mixers

The kitchen mixer is the hardest-working tap in most homes. Its cartridge wears until the spout drips, the lever stiffens or water seeps around the base into the cupboard. We identify the brand and model, replace the cartridge or the mixer, and check the hoses and isolating valves while we're there. Pull-out spray mixers have a hose under the sink that can crack; we can usually replace it on its own.

Basin taps

Basin taps sit in a damp, soapy room, and soap and limescale build up around the spindle and make them stiff. A leak at the base of a basin tap often runs down inside the vanity and swells the cabinet floor before anyone notices. In an upstairs bathroom or a flat, it can reach the ceiling below.

Laundry taps

Laundry taps are often the oldest in the home and are left open for years to supply the washing machine. When you finally turn them off, they're stiff or start dripping. We repair or replace them and fit new machine hoses. A single-lever machine tap makes it easy to shut off the machine when you go away.

Garden taps

Garden taps in older Randwick homes often sit on galvanised risers that rust at ground level. A tap that wobbles when you turn it may be close to breaking. We replace the tap and riser with copper and fix it securely to the wall or a post.

Washer taps: repair them properly

The most common reason a washer tap keeps dripping is that only the washer gets changed. Water and grit wear a groove into the brass seat, and a new washer can't seal against it. A proper repair re-cuts the seat, fits a new washer, and replaces the spindle O-rings while the tap is open. Done properly, a washer tap repair lasts for years.

Converting to quarter-turn

Ceramic disc conversion spindles turn traditional washer taps into quarter-turn taps without changing the tap bodies or handles. They shut off with a light touch and drip far less. They're a popular choice in heritage bathrooms, where owners want to keep the original tapware but make it easier to use.

Choosing new tapware

  • Match the holes: one, two or three holes in the basin, sink or benchtop.
  • Choose solid brass: it lasts longer than cheaper materials.
  • Period style: reproduction cross-handle taps suit heritage bathrooms.
  • Pick a brand with local parts: it makes future repairs quicker.
  • Think about the users: lever handles are easier for children and older hands.

Low flow at a tap

If one tap has low flow while others are fine, the cause is usually at that tap: a blocked aerator, a partly closed isolating valve or a worn cartridge. In older Randwick homes, rust flakes from galvanised pipe often block aerators. Unscrewing and rinsing the aerator often fixes it. If every tap has low flow, the cause is further back: the meter valve, a pressure problem, or old galvanised pipes narrowing inside.

Dripping taps and your water bill

A single dripping tap runs every minute of every day. Over a year, a steady drip can add up to thousands of litres. A dripping hot tap also wastes the energy used to heat the water. Fixing drips early also protects the tap, because the longer a washer tap drips, the deeper the groove it wears in the seat.

Taps in walk-up flats

In Randwick's interwar walk-ups, a leak at the base of a basin tap or a shower tap leaking inside the wall can reach the flat below. If a neighbour mentions a stain, check the taps and cupboards for damp, and look for loose tiles around the shower. If you can't see the cause, call us and we'll find it.

Taps that bang or shudder

If a pipe bangs when you turn a tap off quickly, that's water hammer. It's most common with quarter-turn taps, mixers and washing machine valves that close fast. Loose old pipes under the floor make it louder. A tap that shudders while running usually has a loose washer or worn spindle. See water hammer.

Hot taps that run cold, or cold taps that run warm

If a mixer gives warm water when set to cold, a worn cartridge may be letting hot and cold cross over. If the hot water takes a long time to reach a tap, it may be a long pipe run in a bigger Federation house. See hot water in Randwick.

Isolating valves under the sink

Isolating valves let you turn off one tap without shutting off the whole home. In many older Randwick homes, they were never fitted or have seized. When a tap needs repair and there's no working valve, the water has to go off at the meter, which in a block of flats can mean finding the right meter in a bank. We replace seized valves, or fit new ones, as part of a tap repair.

Getting ready for our visit

  • Take a photo of the tap and any brand name on it.
  • Clear the cupboard under the sink or vanity.
  • Know where your meter is, especially in a block of flats.
  • Tell us about access: stairs and parking.
  • List every tap you'd like looked at, so we bring the right parts.

Looking after your taps

  • Don't over-tighten washer taps.
  • Rinse aerators every few months.
  • Turn isolating valves off and on once a year so they don't seize.
  • Clean around spindles and bases with a mild cleaner.
  • Turn off garden taps fully after use.
  • Fix drips early, before they wear the seat badly.

What to expect on the day

We give you a time window and let you know when we're on the way. Most tap repairs are done in one visit with parts from the van. We protect your floor and benchtop, turn off the water, take the tap apart and show you the worn parts. Once it's repaired, we test it and make sure it turns smoothly.

Wall-mounted bath sets

Terraces and Federation houses often have a wall-mounted bath set: two taps and a spout set into the wall above a clawfoot or built-in bath. The tap bodies sit inside the wall, and their spindles and washers wear the same way as any washer tap. Most repairs are done from the front. If the set is leaking inside the wall, we'll find where, and explain the least invasive way to fix it so original tiles stay in place.

Taps in shared houses

With the hospital and university nearby, many Randwick homes are shared by several adults. Taps in shared kitchens and bathrooms get far more use, and washers and cartridges wear faster. Lever mixers and quarter-turn taps stand up to heavy use better than washer taps. If you own a shared house, getting every dripping tap fixed in one visit is quick and good value.

Taps for every age

Stiff washer taps are hard for small hands and sore fingers. Lever mixers and quarter-turn conversions need only a light push. Pairing new bathroom taps with a tempering valve on the hot water reduces the risk of scalds. See tempering valve installation.

Why our tap repairs last

We repair taps the way they should be repaired: re-cut seats instead of just swapping washers, quality washers and O-rings, cartridges that match the original, and clean, lubricated spindles so the tap turns smoothly. We test every tap before we leave. Our labour is covered by a lifetime warranty.

Why Randwick homeowners call us

We come up from Matraville and repair taps in Randwick terraces, Federation houses and flats every week, from period tapware owners want to keep to modern mixers. You get options and a fixed price before any work starts. If something is dripping, send us a photo and we'll tell you the likely fix before we arrive.

Repairing old taps you love

Some Randwick owners have tapware that's been in the house for generations, or that they've hunted down to suit a period bathroom. We treat it with care. We use the right tools so chrome and nickel finishes aren't scratched, protect the basin and tiles while we work, and take photos as we go so everything goes back exactly as it was. If a part is no longer made, we'll look for a compatible replacement before suggesting a new tap. When a new tap is the only option, we'll help you find one that suits the room.

Taps and old galvanised pipe

If your taps keep wearing out quickly, or you're always rinsing grit out of aerators, the pipes feeding them may be the real problem. Old galvanised pipe sheds rust that wears washers, seats and cartridges. A sediment filter at the kitchen sink helps, but replacing the worst runs of old pipe fixes the cause, improves pressure, and makes every tap repair last longer. We'll show you what we find and give you options.

Small jobs worth doing together

If you've got a dripping basin tap, a stiff laundry tap and a wobbly garden tap, get them done in one visit. It saves call-outs and gives us a chance to check the isolating valves and flexi hoses while we're there.

Whatever the tap, the aim is the same: a tap that turns easily, shuts off cleanly and lasts.

Tap words explained

  • Washer: the rubber disc that seals a traditional tap.
  • Seat: the brass ring inside the tap body that the washer closes on.
  • Spindle: the part that turns when you turn the handle.
  • Cartridge: the unit inside a mixer or quarter-turn tap.
  • O-ring: a small rubber ring that seals around the spindle.
  • Aerator: the screen at the end of the spout.
  • Isolating valve: a small valve under the sink that turns off water to one tap.

What happens when you call

1

Tell us what's going on

Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.

2

Options and a fixed price first

We find the cause, explain your options and give you a fixed price for each before any work starts.

3

Fixed, tested and backed

We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.

Jobs we finished recently

Toilet before repair in Chifley
Toilet before repair in Chifley
Toilet after repair in Chifley
Toilet after repair in Chifley

See more recent projects

Why Randwick homeowners call us

  • Based in Matraville, a short drive up from Matraville
  • Rated 5.0 from 110 Google reviews
  • Free quotes, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C)

Tap repair questions from Randwick homeowners

Why does my tap still drip after a new washer?

The seat is usually worn. We re-cut it as part of the repair.

Can you repair my original period taps?

Usually, with new washers, re-cut seats and new spindles.

Can you fix a dripping mixer?

Usually, with a new cartridge.

Can you repair a shower tap without removing tiles?

In most cases, yes, from the front.

Can washer taps be converted to quarter-turn?

Often, with ceramic disc spindles, keeping the original look.

Why is my tap so stiff?

A worn spindle, a dry O-ring or a failing cartridge.

Can you fix my garden tap?

Yes, and replace a rusted riser if needed.

Do I need to turn off all the water?

Only without a working isolating valve. We can fit one.

Can you supply period-style taps?

Yes, or fit ones you've bought.

How long does a tap repair take?

Most take under an hour.

Can you do several taps in one visit?

Yes, which saves another call-out.

What warranty do I get?

Our workmanship carries a lifetime labour warranty.

More plumbing in Randwick: our Randwick plumber page, taps and toilets, toilet repair and leak detection. Nearby: tap repair in Matraville and Malabar. Guides: mixer tap leaking and ceramic disc vs washer taps.

Call 0401 758 373Free quote