★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Tap repairs in Rosebery 2018

We repair and replace taps in Rosebery homes and apartments: dripping washer taps in Federation and Californian bungalows, old tub and machine taps in outside laundries, period taps in heritage homes, leaking kitchen and basin mixers, shower taps leaking behind tiles, garden taps and taps worn by rust from old galvanised pipe. We re-cut worn tap seats, replace cartridges, O-rings and spindles, and fit new tapware when a repair won't last. You get options with a fixed price for each before any work starts, backed by our lifetime labour warranty.

A tap in Rosebery can be anything from an old cross-handle over the tub in a bungalow's outside laundry to a modern mixer in a new apartment kitchen to the north. The old ones drip because their washers and seats are worn; the new ones because their cartridges are. And in a lot of older Rosebery houses, rusty water and falling pressure point to the original galvanised pipe behind the tap. We come over from Matraville and fix taps across Rosebery, keeping period taps where you want to.

Tap problems we fix in Rosebery

  • Drips from the spout after the tap is turned off.
  • Leaks around the handle or the base of a mixer.
  • A mixer that drips or won't hold temperature.
  • Brown or rusty water when a tap is first turned on.
  • Weak flow from one tap or all of them.
  • Banging or squealing when a tap is turned on or off.
  • Leaks under the sink at the connections or braided hoses.
  • Outdoor taps that are corroded, seized or snap off.

Why taps wear out in Rosebery

Washer taps in bungalows

Many of Rosebery's older homes still have traditional washer taps in the laundry, bathroom and garden. A rubber washer closes against a brass seat. Over the years the washer hardens and the seat wears a groove, and the tap drips however hard it's turned. A new washer on a worn seat won't last, so we re-cut the seat when we repair it.

Rust from old galvanised pipe

A lot of Rosebery's oldest homes still have galvanised steel water pipe. It rusts from the inside, and flakes of rust travel to the taps, where they lodge in aerators, wear washers and damage mixer cartridges. If your taps run brown in the morning and keep wearing out, the pipe behind them is part of the problem. See our galvanised pipes guide.

Mixers in newer homes

Rosebery's newer apartments and townhouses have mixers throughout, often imported brands with cartridges specific to each model. Most faults are worn cartridges and O-rings. We identify the brand before ordering parts.

Period taps in heritage homes

Parts of old Rosebery are heritage conservation areas, and many bungalow owners want to keep taps that suit the house. Old cross-handle taps and bath sets wear at the washer, seat and spindle like any washer tap. Most can be repaired with new internals while the outside stays the same.

Water pressure

High mains pressure wears washers and cartridges faster and makes taps bang. If several taps are failing, a pressure limiting valve at the meter is worth considering.

Taps in different Rosebery homes

Home typeTypical tapsCommon faults
Federation bungalowsSeparate washer taps, old laundry and garden tapsWorn seats, stiff spindles, rust from galvanised pipe
Californian bungalowsWasher taps in the laundry, mixers in an updated kitchenDrips, no isolating valves, leaks behind tiles
Homes in heritage areasPeriod-style taps worth keepingWorn internals in good bodies
Apartments in the north of RoseberyMixers with isolating valvesCartridges, O-rings, hose leaks
Bungalows with outside laundriesOld tub and machine tapsSeized valves, perished hoses

How we repair taps

  1. Turn off the water at the isolating valve, or at the meter if there isn't one.
  2. Take the tap apart and find the cause: washer, seat, jumper, O-ring or cartridge.
  3. Give you options to repair or replace, each with a fixed price.
  4. Repair or replace with quality parts, re-cutting worn seats.
  5. Clean the aerator, often full of rust or grit in older homes.
  6. Test it on and off, hot and cold, and check for leaks under the sink.

Washer tap repairs

New washers, jumpers and O-rings, and worn seats re-cut.

Mixer repairs

Cartridges replaced with the correct part, or the mixer replaced.

Laundry and machine taps

Old taps replaced with quarter-turn valves and new hoses.

Shower and bath taps

Wall taps repaired or converted, and leaks behind tiles found.

Outdoor taps

Corroded and seized garden taps replaced with solid brass.

Isolating valves

Fitted under sinks and basins so taps can be turned off individually.

Repair or replace?

ProblemUsually a repairUsually a replacement
Washer tap drippingNew washer and re-cut seatCracked or corroded body
Mixer drippingNew cartridgeCartridge no longer made
Leak at the handleNew O-ringsBroken handle or body
Outdoor tap seizedSometimes freed upOften yes, solid brass
Taps failing from rustClean and repairReplace the galvanised pipe as well

What affects the cost

  • The tap type and whether parts are available.
  • How many taps are done in one visit.
  • Access: tight cabinets and taps behind tiles.
  • Isolation: whether the water has to go off at the meter.
  • Parts: imported mixers may need ordering.
  • A new tap: depends on the model.

You get a fixed price before any work starts.

Who's responsible?

  • You: taps and pipes on the house side of the meter.
  • Sydney Water: the meter and the main.
  • Apartments: taps in your unit are yours; shared pipes are shared.

Quick checks you can do

  1. Spout or handle? Drips from the spout mean washer or cartridge; water at the handle means O-rings or cartridge.
  2. Weak or spluttering flow? Unscrew the aerator and rinse out rust and grit.
  3. Brown water? Run the cold tap for a minute first thing in the morning. If it clears, old pipe is the likely source.
  4. Isolating valves: check they turn.
  5. Outdoor taps: if one is stiff, don't force it.

See our dripping taps guide.

Signs it's urgent and when it can wait

  • Call us soon if a tap won't turn off, water is leaking into a wall or cabinet, or a tap has snapped.
  • Book a time if it drips, a handle is stiff or the flow is weak.
  • Mention it next visit if a tap is a little noisy.

A recent tap repair nearby

Here's a recent job nearby in Maroubra, where leaking taps were fixed on the same visit as a drain clear.

Leaking taps fixed while clearing drains, Maroubra (nearby)

The problem: a Maroubra home had leaking tapware as well as slow, blocked drains.

What we did: we laid a mat to protect the floor, jetted the drains and floor wastes clear, then repaired the leaking taps in the same visit.

The result: the taps shut off properly and the drains flow freely, with no second call-out.

Floor protected during tap and drain work near Rosebery
Floor protected, Maroubra
Drain jetting on the same visit as tap repairs near Rosebery
Drains cleared on the same visit

“Great plumber, fixed my leaking taps quickly and at a great price!”

Tom (Google review)

More local work is on our recent projects page.

Taps across Rosebery, area by area

  • The original estate streets: the oldest washer taps and the most galvanised pipe.
  • Bungalows with outside laundries: original tub and machine taps with no isolating valves.
  • Heritage conservation areas: period taps worth repairing rather than replacing.
  • Towards Kensington and Mascot: bungalows with a mix of old and new.
  • In the north of Rosebery: apartments on old factory sites with mixers throughout.

Brown water and your taps

If the first glass from the tap is tinged brown, especially in the morning or after you've been away, it's usually rust from galvanised pipe. The water has been sitting in rusty pipe overnight. It's not just unpleasant; the rust wears tap washers and cartridges and blocks aerators, so taps fail sooner. Running the cold tap for a minute clears it for the day, but the long-term fix is replacing the galvanised pipe. We can do that in stages, starting with the worst sections. If it's only the hot tap that runs brown, the hot water system may be the source. See brown hot water.

Outside laundries

In many Rosebery bungalows the laundry is a small room or lean-to at the back, with an old concrete or steel tub, a pair of washer taps and a washing machine connected to taps that haven't been turned in years. If the tub taps drip and the machine taps won't turn off, it's often worth upgrading the lot: a mixer over the tub, quarter-turn machine valves, and new machine hoses. It fixes several worn parts in one visit and makes it easy to turn the machine off when you go away.

Shower taps behind old tiles

In older Rosebery bathrooms, shower taps sit in the wall behind tiles that may be decades old. If a tap body or the joint behind it leaks, water runs into the wall every time someone showers. You may see loose tiles, mould at the base of the wall, or damp in the room next door. New grout won't fix water coming from behind. We find the leak and repair it with as little tile removal as possible. See leak detection in Rosebery.

Mixers in apartments

Kitchen and bathroom mixers in Rosebery's apartments get heavy daily use. Cartridges wear, pull-out spray hoses kink and leak under the sink, and loose bases let the mixer swivel. Because there's another home below, a slow leak under a sink matters more than in a house. Look under the sink every few months for damp, swelling or drips. If your mixer has a brand name on it, send us a photo before we come so we can bring the right cartridge.

Outdoor taps

Outdoor taps in Rosebery front gardens and back yards get sun, rain and hoses pulled at them. Turn every outdoor tap on and off once a month so the spindle doesn't seize. When it's time to replace one, a solid brass tap fixed firmly to the wall lasts much longer than a cheap one. We can add a vacuum breaker so garden water can't be drawn back into the house pipes. If you want water for the garden without the bill, ask us about a rainwater tank with a pump.

Converting old washer taps

If you like the look of your traditional taps, they don't have to go. Ceramic disc conversion spindles fit many existing tap bodies and turn them into quarter-turn taps that drip far less and are easier on the hands. It's a good option in older Rosebery bathrooms where you'd rather not disturb the tiles.

Hot taps that run cold or too hot

If the hot tap takes a long time to warm up, runs lukewarm or is scalding, the tap usually isn't the problem. It could be the hot water system, a tempering valve, or a long pipe run to an outside laundry. We check the hot water side too. See hot water in Rosebery.

Choosing a new tap

  • Match the holes in your sink or basin.
  • Choose solid brass, especially outside.
  • Check the WELS rating to save water.
  • Pick a brand with local spare parts.
  • Consider filtered water in the kitchen. See water filters.

A tap care checklist

  • Rinse aerators every few months, more often if you have galvanised pipe.
  • Turn isolating valves off and on once a year.
  • Turn washing machine taps a few times a year, and off when you go away.
  • Turn outdoor taps on and off monthly so they don't seize.
  • Look under sinks for damp or swelling, especially in apartments.
  • Don't over-tighten washer taps.

What to expect on the day

We give you a time window and let you know when we're on the way. Most tap repairs are done in one visit with parts from the van. If a mixer needs a special cartridge, we order it and come back. We protect benchtops and floors, and point out any other taps that are close to needing attention.

Tap words explained

  • Washer: the rubber disc that seals against the seat.
  • Seat: the brass ring inside the tap.
  • Cartridge: the unit inside a mixer that controls flow and temperature.
  • Aerator: the screen at the end of the spout.
  • Isolating valve: a small stop tap under a sink or basin.
  • Galvanised pipe: old steel pipe that rusts from the inside.

Replacing a mixer cartridge, step by step

  1. We turn off the isolating valves under the sink, or the water at the meter if there aren't any.
  2. The handle comes off, usually after removing a small cap and screw.
  3. The cartridge retaining nut is unscrewed and the old cartridge lifted out. We note its brand and model, and check the seats and O-rings below.
  4. Any rust, grit or scale in the body is cleaned out, which matters in homes with old galvanised pipe.
  5. The new cartridge goes in, matched to the mixer, and the nut is tightened to the right torque, not more.
  6. The handle goes back on, the water is turned on slowly, and we test the full range of hot and cold several times.

If the mixer's body is corroded or the cartridge isn't made any more, we'll tell you before we start and price a new mixer instead.

Banging pipes in long runs

Rosebery bungalows often have a long run of pipe from the meter at the front to the kitchen and outside laundry at the back. When a tap or a washing machine valve snaps shut, the moving water in that long pipe stops suddenly, and the shock bangs through the house. Loose pipe under the floor makes it worse. The fixes are usually simple: clip loose pipe firmly, replace a worn tap washer or cartridge that's closing too abruptly, and fit a pressure limiting valve at the meter if pressure is high. See water hammer.

Water under the sink that isn't the tap

When there's water in the cabinet under a Rosebery kitchen sink, the tap is only one suspect. The braided hoses feeding the mixer, the isolating valves, the dishwasher connection, a filter cartridge housing and the sink waste and trap can all leak. In older kitchens the waste may still be old metal pipe that has corroded through. We dry everything, run the water, and watch each connection until we find the one that's weeping. Then we fix that and check the rest while we're there.

Easier taps for older hands

Many Rosebery homes have owners who've lived there for decades. Stiff cross-head taps get harder to turn as hands get older. Lever handles, quarter-turn ceramic spindles and single-lever mixers are all much easier, and most fit the existing holes. In the bathroom, a thermostatic mixer or a tempering valve keeps hot water at a safe temperature. If you're having one tap repaired, ask us about making the others easier at the same time.

Going away?

Before a trip, turn off the washing machine taps so the hoses aren't under pressure while the house is empty. Check under each sink for drips. Make sure garden taps are fully off and no hose is left connected with a trigger nozzle. In an apartment, a split hose under a sink while you're away can do a lot of damage to the home below, so a quick look before you leave is well worth it.

What a drip costs

A tap dripping once a second runs all day and all night. Over a quarter it adds up on the water bill, and you pay sewer usage on it too. A dripping hot tap wastes the energy used to heat the water as well. Drips also stain basins, leave scale and usually get worse. Fixing it early is almost always the cheapest option.

Keeping the character of an older Rosebery home

Owners of Rosebery's older bungalows often want taps that suit the house. Traditional cross-handle taps, bath sets and bridge-style kitchen taps are still made, with modern ceramic internals that don't drip. If the original tap bodies are sound, we can often replace just the internals and keep the outside looking the same. If a tap really is past saving, a period-style replacement can usually go into the same holes, so tiles and benchtops aren't disturbed.

When the tap is a sign of something bigger

Several taps wearing out within a few months, brown water, low pressure everywhere, or banging in the walls usually point beyond the taps to the pipes or the pressure. If we see these signs while repairing a tap, we'll tell you and explain what we think is going on. You'll get a separate fixed price for anything more, and it's your call whether to deal with it now or later.

Garden taps on old risers

Front garden and courtyard taps in older Rosebery homes are often on a galvanised riser pipe coming up out of the ground. Years of hoses being pulled and rust at ground level weaken it, and eventually it snaps at the base, spraying at full mains pressure until the water is turned off at the meter. If your garden tap wobbles or the riser is rusty where it meets the ground, replacing it before it breaks is a quick job.

Fixing a dripping washer tap properly

  1. Isolate the water and open the tap to drain it.
  2. Protect the basin and catch small parts with a towel.
  3. Remove the handle and cover carefully so the chrome isn't scratched.
  4. Unscrew the spindle and remove the jumper and washer.
  5. Check the brass seat. If it's pitted or grooved, re-cut it smooth. This is the step most quick fixes skip.
  6. Fit a new washer, jumper and O-rings, or a ceramic disc conversion.
  7. Reassemble, turn the water on and test it several times.

Done this way, a repaired washer tap can go years without dripping.

What happens when you call

1

Tell us what's going on

Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.

2

Options and a fixed price first

We find the cause, explain your options and give you a fixed price for each before any work starts.

3

Fixed, tested and backed

We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.

Jobs we finished recently

Toilet before repair in Chifley
Toilet before repair in Chifley
Toilet after repair in Chifley
Toilet after repair in Chifley

See more recent projects

Why Rosebery homeowners call us

  • Based in Matraville, a short drive from Rosebery
  • Rated 5.0 from 110 Google reviews
  • Free quotes, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C)

Tap questions from Rosebery homeowners

Why does my tap still drip with a new washer?

The brass seat is probably worn. We re-cut it so the washer seals.

Why does my tap water run brown in the morning?

Usually rust from old galvanised pipe. It clears after a minute, but the pipe is worth replacing.

Can you repair my mixer?

Usually, with a new cartridge. If parts aren't made any more, a new mixer is better value.

Why do my taps keep wearing out?

Rust from old pipe, or high water pressure. We check both.

Can you convert my washer taps to quarter-turn?

Often, with ceramic disc spindles that fit the existing bodies.

My outdoor tap is seized. What should I do?

Don't force it. We'll replace it with solid brass.

Do I need to turn all the water off?

Only if there's no isolating valve. We can fit them while we're there.

Can you replace my washing machine taps?

Yes, with quarter-turn valves and new hoses.

Can you supply the tap?

Yes, or fit one you've bought. Send us the model first.

How long does a tap repair take?

Most take under an hour.

Water is leaking under my apartment sink. Is it urgent?

Fix it soon, because water can reach the home below.

Can you fix several taps in one visit?

Yes. It saves another call-out.

More plumbing in Rosebery: our Rosebery plumber page, taps and toilets, toilet repair and leak detection. Nearby: tap repair in Mascot and Kensington. Guides: mixer tap leaking and ceramic disc vs washer taps.

Call 0401 758 373Free quote