Burst pipe repairs in Matraville 2036
When a pipe bursts, the first hour matters. Water through a ceiling, into a laundry or under a floor does damage fast. We're based on Girawah Place in Matraville and repair burst pipes for homes all over the suburb, from the streets around Bunnerong Road and Franklin Street to the homes off Australia Avenue and near Heffron Park.
A pipe has burst: what to do right now
- Turn off the water at the meter. In most Matraville houses the meter and main stop tap are near the front boundary. Turn the tap clockwise until it stops.
- Switch off the hot water system if the burst is on a hot pipe: power off at the switchboard for electric and heat pump units, or turn a gas unit off.
- Turn off the power to any area where water is near power points, lights or appliances.
- Catch and soak up water with buckets and towels, and move furniture and valuables away.
- Open a cold tap at the lowest point of the house to drain the remaining water from the pipes.
- Call us and tell us where the water is coming from and whether it's hot or cold.
Can't turn the stop tap? Old stop taps in post-war homes often seize. Don't force it with a wrench if it feels like it will snap. Tell us when you call, and if the burst is serious, Sydney Water can also turn the water off at the meter. Our water shut-off guide shows what to look for.
How burst pipes show up in Matraville homes
- Water spraying or pouring from a pipe under a sink, in a laundry or at the hot water system.
- Water through a ceiling or a bulging, stained ceiling under a bathroom.
- Water running across the yard or bubbling up through the lawn or between pavers.
- A sudden loss of pressure at every tap.
- The sound of rushing water under the floor or in a wall.
- A burst flexi hose under a basin, sink or toilet: one of the most common causes of an indoor flood.
What causes pipes to burst in Matraville
Galvanised pipe in post-war homes
Many of Matraville's brick and fibro houses were plumbed in galvanised steel. It rusts from the inside, narrows and eventually splits, usually at a thread. If your home still has galvanised pipe, the first burst is often a warning that more will follow. See our galvanised pipes guide.
Old copper and its fittings
Copper that's 50 or more years old can pinhole at bends and where it rubs against brick or clips. Brass fittings and compression joints can crack. Outdoor pipes and fittings exposed to the weather wear faster.
Building, digging and cranes
Matraville has a lot of knock-down rebuilds, duplexes and pool installs. Excavators, post-hole diggers and crane work near the boundary can damage water services buried in the yard. One recent Matraville job was a copper water service damaged by a crane lifting a pool into the property next door.
Sand movement and tree roots
Matraville's sandy ground shifts as it wets and dries. Over many years that movement puts strain on old joints in the water service. Big tree roots near the line can crack or lift pipes too.
High water pressure
Pressure that's too high hammers pipes and fittings every time a tap or appliance valve shuts off. A pressure limiting valve at the meter reduces that strain. See pressure limiting valves.
Worn flexible hoses
The braided hoses that connect taps and toilets to the pipes have a limited life. Rust spots, kinks or bulges mean a hose is close to failing. See flexi hose replacement.
Burst pipes in different Matraville homes
Original post-war houses
Water services often run across the front yard from the meter, and the pipes inside run under timber floors and through the walls to the bathroom, kitchen and laundry. We can usually get under the floor to repair pipes there.
Extended homes
Extensions often mean new copper joined to old galvanised. The join between them is a common failure point, because the two metals react with each other.
Duplexes and townhouses
Newer homes on redeveloped blocks often use modern plastic pressure pipe and have pipes in the slab or walls. Each dwelling usually has its own meter and stop tap; knowing which is yours saves time in a burst.
Units
In a unit, a burst inside your own unit is ours to fix for you. Shared pipes and risers are usually the building's responsibility, and the building may have its own shut-off valves.
What's under a typical Matraville front yard
In most Matraville houses, the water meter sits near the front fence and the water service runs underground to the house, often under a lawn, a path or the side of the driveway. In original post-war homes this pipe is usually galvanised steel or early copper, laid fairly shallow in sand. When driveways, fences and gardens were redone over the decades, the pipe often ended up under concrete or pavers.
That's why so many Matraville bursts and leaks happen in the front yard, and why we always check where the service runs before digging. If the service is old, shallow or has already burst once, replacing it can be a better use of money than repairing it again and again.
Choosing pipe for a replacement
| Pipe | Where we use it | Why |
|---|---|---|
| Copper | Water services, hot and cold pipes inside | Long-lasting, handles heat and pressure, easy to join to existing copper |
| PE (polyethylene) pressure pipe | Long underground runs from the meter | Flexible, joint-free over long lengths, doesn't corrode in sand |
| PEX | Pipes inside walls and floors in newer work | Flexible, fewer joints, quick to run through walls |
| Galvanised steel | Not used in new work | Rusts from the inside; we replace it rather than extend it |
We'll recommend the right pipe for your home and explain why. See our plastic pipe types page for more.
Signs a burst is urgent and when it can wait
- Call us straight away if water is coming through a ceiling, flooding a room, running near electrics, or you can't turn the water off.
- Call us soon if you've turned the water off and the home is without water, or a pipe is dripping steadily.
- Book a time if it's a slow weep at a fitting that you can catch in a bucket, or you want old galvanised pipe replaced before it fails.
What to expect when we come out
When you call, we'll ask where the water is, whether it's hot or cold, and whether you've turned it off. That way we bring the right pipe and fittings and can usually finish in one visit. We'll give you a time window and let you know when we're on the way. On site we protect floors, show you the damage, give you your options and price, and then get on with it. When we're done, we test the repair under pressure and clean up.
Going away? Protect your pipes
A burst while you're on holiday can run for days. Before you go away for more than a few days, consider turning off the water at the main stop tap and switching the hot water system to off or holiday mode. Ask a neighbour to keep an eye out for water in the front yard. If your home has old galvanised pipe or flexi hoses that are due for replacement, fixing them before a long trip is cheap insurance.
How we repair burst pipes
- Make it safe and make sure the water and any nearby power are off.
- Expose and inspect the damaged pipe, and check the pipe either side of it.
- Give you options: repair the damaged section, or replace a longer run if the rest of the pipe is in poor condition. You get a fixed price for each.
- Repair properly with new copper or pressure pipe and quality fittings, supported and protected.
- Restore the water slowly, bleed the air, and check every tap for flow.
- Check the meter afterwards to make sure there isn't a second leak.
Water service repairs
Damaged sections of the pipe from the meter to the house cut out and replaced.
Full water service replacement
Old galvanised or failing services replaced with a new line to the house.
Indoor pipe repairs
Burst pipes under floors, in walls and in laundries repaired.
Hot water pipe repairs
Burst hot pipes and fittings at the hot water system repaired.
Flexi hose replacement
Burst and worn hoses replaced throughout the home.
Stop tap replacement
Seized or leaking main stop taps replaced so you can turn the water off when you need to.
Repair the burst or replace the pipe?
| Situation | Usually a repair | Usually worth replacing |
|---|---|---|
| Copper service damaged by digging | Cut out the damaged section and join in new copper | Only if the rest of the line is also damaged |
| Galvanised pipe split at a thread | A repair to get the water back on | The galvanised run before it splits elsewhere |
| Burst at an old brass fitting | Replace the fitting | Nearby fittings of the same age |
| Burst flexi hose | Replace that hose | Every hose that's the same age |
| Second burst in a year | Repair the burst | The whole water service or old internal pipework |
What affects the cost of a burst pipe repair
- Where the burst is: under lawn, under concrete, inside a wall or under a floor.
- How much pipe is damaged, and whether the rest of the line is worth keeping.
- Access: tight side passages, low floors and paving add time.
- What else is needed: a new stop tap, hoses or a pressure limiting valve.
- Making good: re-laying pavers, patching concrete, or a plasterer for a ceiling.
You get a fixed price for each option before any work starts.
Who's responsible?
- Sydney Water: the water main in the street and the meter itself. If water is pouring from the meter or the footpath, call Sydney Water.
- You (the homeowner): everything on the house side of the meter.
- If someone else's work damaged your pipe, such as a contractor or a crane operator next door, the cost may be theirs or their insurer's. Take photos and keep our invoice and report.
Bursts at the hot water system
The pipes and fittings around a hot water system work hard: they carry hot water at mains pressure and go through heating and cooling every day. A split copper pipe at the tank, a failed tempering valve or a cracked fitting can let go suddenly. If water is pouring from around the tank, turn off the water at the meter or the cold isolating valve on the tank, switch the system off, and call us. If the tank itself is leaking, it usually needs replacing. See hot water in Matraville.
Burst pipes and your water bill
A burst that ran for a while before it was found can show up as a big water bill. If the leak was on your side of the meter and has been repaired, Sydney Water may be able to help with part of the bill. Keep our invoice, which shows the leak and the repair, and contact Sydney Water once the work is done.
What to ask before anyone repairs your pipe
- Is the plumber licensed? Ours is Lic. 398171C, and you can check it with Service NSW.
- Will you get a fixed price before the work starts, or an hourly rate with no end point?
- Will they check the pipe either side of the burst, or only patch the hole?
- What warranty do you get on the work? We give a lifetime labour warranty.
- Will they test the repair under pressure and check the meter afterwards?
Our recent burst pipe repair in Matraville
Copper water service damaged by a crane, Matraville
The problem: a crane lifting a swimming pool into the property next door damaged the copper water service buried in a Matraville backyard.
What we did: the pipe had already been dug out and the water turned off when we arrived. The copper line had a damaged section where it runs under the lawn beside the paving, but the rest was in good condition, so we cut out the damaged section and joined in new copper pipe and fittings.
The result: with the water back on, we ran every tap in the house to check the flow. The repair was finished in under an hour, with no need to replace the whole line.


More local jobs are on our recent projects page.
Burst pipes across Matraville, area by area
- Streets around Bunnerong Road and Franklin Street: post-war houses with original water services under the front yard.
- Off Australia Avenue: older homes, many extended, where old and new pipes are joined.
- Near Heffron Park: homes on sandy ground where water services shift over time.
- Redeveloped blocks: duplexes and townhouses next to construction, where services near the boundary can be damaged.
After a burst: drying out and insurance
Once the pipe is fixed, dry the area as fast as you can. Open windows, run fans, and lift wet carpet and underlay. Sagging or stained plasterboard usually needs replacing. Photograph everything before you clean up.
If you're claiming on insurance, or claiming from whoever damaged the pipe, we can give you a written report with photos of what failed and what we did.
Watch the area for a few weeks after a burst. Timber floors and wall frames can take a while to dry, and a musty smell or new mould means moisture is still trapped. Under a raised floor, good airflow helps; make sure the vents in the brickwork aren't blocked by garden beds or stored items. If damp keeps coming back, let us know and we'll check there isn't a second leak.
Burst pipe words explained
- Water service: the pipe from the meter to the house.
- Main stop tap: the tap at the meter that turns off water to the whole property.
- Galvanised pipe: grey steel pipe with threaded joints, used in older homes, which rusts from the inside.
- Compression fitting: a fitting that seals a pipe joint by squeezing a ring around the pipe.
- Water hammer: the bang in the pipes when a tap or valve shuts off quickly.
- Pressure limiting valve: a valve at the meter that lowers the mains pressure to a safe level for the home.
How to avoid a burst
- Know where your stop tap is, and turn it now and then so it doesn't seize.
- Replace flexi hoses that are rusty, kinked or more than about ten years old.
- Fit a pressure limiting valve if your taps bang or your pressure is high.
- Plan to replace galvanised pipe before it fails.
- Before digging, fencing or building near the front boundary, find out where the water service runs.
- If construction is happening next door, check your meter during the work.
- Keep the meter and stop tap clear of plants, mulch and pavers so you can reach them quickly.
- Insulate exposed hot water pipes outside the house to protect them from sun and weather, and check outdoor fittings for green crust, which is an early sign of corrosion.
What happens when you call
Tell us what's going on
Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.
Options and a fixed price first
We find the cause, explain your options and give you a fixed price for each before any work starts.
Fixed, tested and backed
We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.
Why Matraville homeowners call us
- Based in Matraville, with our workshop on Girawah Place
- Rated 5.0 from 110 Google reviews
- Free quotes, with options and a fixed price before any work starts
- Lifetime labour warranty on our workmanship
- Licensed plumbers, drainers and gasfitters (Lic. 398171C)
Burst pipe questions from Matraville homeowners
What should I do first when a pipe bursts?
Turn off the water at the main stop tap at the meter, switch off the hot water system if it's a hot pipe, keep power away from water, and call us.
Where is the stop tap on a Matraville house?
Usually at the water meter near the front boundary. In duplexes each home usually has its own meter and stop tap; in units it may be in a meter cupboard.
My stop tap won't turn. What do I do?
Don't force it so hard it snaps. Call us, and if water is pouring out, Sydney Water can also turn the water off at the meter.
Who pays if work next door damaged my pipe?
Often whoever did the work, or their insurer. Take photos, keep our invoice and report, and raise it with them.
Can you repair just the damaged section?
Yes, if the rest of the pipe is in good condition. On a recent Matraville job we cut out a damaged section of copper and joined in new pipe in under an hour.
Should I replace my old galvanised pipes?
If one has burst, the rest is usually in similar condition. We can repair the burst and price replacing the rest so you can decide.
Why do my pipes bang when I turn off a tap?
That's water hammer, often from high pressure or loose pipes. A pressure limiting valve and properly secured pipes usually fix it.
Will insurance cover a burst pipe?
Many policies cover damage from a sudden burst, but not always the pipe repair itself. Check your policy; we can give you a written report with photos.
How long does a burst pipe repair take?
A single damaged section is often repaired within an hour or two. Replacing a water service or a run of old pipe can take a day.
Is a burst at the meter my problem?
No. If water is coming from the meter itself or the street side of it, that's Sydney Water's responsibility. Call them, and we can help if the damage carries on into your side.
Can a burst pipe affect my hot water?
Yes. If the burst is on the hot side, the system will keep trying to refill and heat. Turn it off until the repair is done and the tank is full again.
Do you check for other leaks after the repair?
Yes. We check the meter afterwards so you know there isn't a second leak somewhere else.
More plumbing in Matraville: our Matraville plumber page, leak detection, hot water, taps and toilets, blocked drains and stormwater. Nearby: burst pipes in Maroubra and Malabar. Guides: hidden water leaks, water meter guide and green copper pipes.