Gas cooktop and oven installation in the Eastern Suburbs
Bought a new gas cooktop or freestanding oven and need it hooked up properly? Our licensed gasfitters connect and replace gas cooking appliances in homes right across the southern Eastern Suburbs, working out of our base in Matraville. Before we touch a fitting, you'll get your options and a fixed price, so there are no surprises when the job is done.
When you need a gasfitter in the kitchen
Swapping an old cooktop
Burners that won't stay lit, cracked enamel or worn knobs often mean it's time for a new hob. We disconnect the old one, check the existing pipework and connect the replacement to suit its fittings.
Connecting a new oven
Freestanding gas ovens and upright cookers usually plug into a bayonet behind the unit. We make sure the connection, hose and restraint chain are right for that model.
Going from electric to gas
If your home already has gas at the meter but the kitchen runs on electric, we can run a new line to the cooking area and set up a safe, tidy connection point.
A faint smell near the stove
A slight gas odour around the cooktop, or burners that flare and pop, can point to a loose joint or a tired regulator. Stop using it and have it checked.
Safety first: If you smell gas, turn off the gas at the meter, open doors and windows, get everyone outside, don't use switches or flames, and call a licensed gasfitter.
What's involved in a cooktop or oven connection
Every appliance arrives with installation instructions from the maker, and those instructions matter. They set out clearances to benchtops and rangehoods, the type of connection allowed and the gas pressure the burners are designed for. We read them before we start, because a cooktop that's out by even a little can burn with a lazy yellow flame or struggle to simmer.
A typical job looks like this:
- Isolate the gas and safely disconnect the existing appliance.
- Inspect the supply pipe and isolation valve for wear, corrosion or poor previous work.
- Fit the correct connector: a rigid connection for most built-in hobs, or an approved hose and bayonet where the appliance allows it.
- Check that the appliance is set up for natural gas or LPG, whichever your home uses.
- Pressure test the line and leak test every joint we've made.
- Light each burner, check the flame picture and confirm the ignition and safety devices work.
When the work is finished, we give you a compliance certificate covering the gasfitting we carried out. You can read more about that on our gas compliance certificate page.
Cooking on gas in southern Eastern Suburbs homes
Kitchens around Matraville, Maroubra, Malabar and Botany vary a lot. In older brick and fibro houses, the gas line to the stove is often decades old, sometimes run in galvanised steel under the floor or through a wall cavity. When we're connecting something new to pipework like that, we take a careful look at its condition, because a fresh appliance deserves a sound supply.
Newer townhouses and apartments in Pagewood and Eastgardens tend to have copper lines and a dedicated isolation valve under the bench, which usually makes a straight swap simpler. Some apartment buildings don't have gas at all, so it's worth checking your meter situation before you buy a gas cooktop.
Near the coast at Maroubra, Malabar and Little Bay, salt air can corrode exposed fittings faster than you might expect, particularly where a pipe comes through an outside wall. We'll point it out if we spot it.
Things to sort out before your appliance arrives
- Check the cutout size of your benchtop against the new cooktop's specifications.
- Confirm whether your home runs on natural gas or bottled LPG.
- Keep the manual and any conversion parts that came in the box.
- Clear the cupboard under the cooktop so we can reach the valve and pipework.
- Make sure there's a power point nearby if the unit has electric ignition.
Why locals call us
- Licensed gasfitters, Lic. 398171C
- Free on-site quotes for gas appliance connections
- Your options and a fixed price agreed before we start
- Lifetime labour warranty on the workmanship
- Over 100 five-star reviews on Google
Common questions
Can I install a gas cooktop myself?
No. In NSW, gasfitting work has to be done by a licensed gasfitter. Even a simple swap involves disconnecting and reconnecting a gas line, which needs proper testing afterwards.
Will my new cooktop fit where the old one was?
Often it will, but cutout sizes differ between brands and models. Measure the hole in your benchtop and compare it to the new unit's installation guide before you buy.
Can you convert an appliance from natural gas to LPG?
Many cooktops and ovens can be converted using the maker's conversion kit, which swaps the injectors and adjusts the settings. We check the model first and only convert where the manufacturer allows it.
Do you take the old cooktop away?
Let us know when you book and we can include removal of the old appliance in your quote.
Does a freestanding oven need a bayonet?
Many freestanding gas cookers connect to a bayonet fitting using an approved hose, with a chain or bracket to stop the unit tipping forward. The appliance instructions tell us which connection is allowed.
What happens if you find a problem with the existing gas line?
We'll stop, show you what we found and explain your choices with a price for each. Nothing extra goes ahead unless you say yes.
Will I get paperwork for the job?
Yes. Once the appliance is connected and tested, you receive a compliance certificate for the gas work we did. Keep it with your home records.
Explore all our gas fitting services, including gas point installation, gas heater servicing and gas hot water. We look after kitchens in Matraville, Maroubra, Pagewood and Botany.
Want to know more first? Browse our free plumbing guides, written for homeowners in the southern Eastern Suburbs.