★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Leak detection in Mascot 2020

We find and fix water leaks in Mascot homes and apartments: leaks in buried pipes that drain away into the sand without a wet patch, old galvanised pipe in workers' cottages and semis, water services under front yards, leaks along shared walls, leaking showers and hoses staining the apartment below, and running toilets. We confirm there is a leak at the meter, track it down with leak detection equipment, show you where it is and give you options with a fixed price for each before any repair starts. Our workmanship carries a lifetime labour warranty.

Mascot is built on deep sand with groundwater close to the surface, and that changes how leaks behave. A leaking water pipe in sand often drains away below the surface instead of making a wet patch, so the first sign is a higher water bill. The older cottages and semis add galvanised pipe that rusts from the inside, and in the apartments around the station a leak usually shows in the ceiling of the unit below. We come over from Matraville, confirm the leak at the meter and track it down.

Signs of a hidden leak

  • A water bill that jumps with nothing else changing.
  • The meter moving when every tap is off.
  • Brown water first thing in the morning and low pressure, which often go with old galvanised pipe that's also leaking.
  • A hissing sound in a wall or under the floor.
  • Damp, mould or bubbling paint low on a wall or near a shower.
  • A stain on the ceiling of an apartment or a townhouse below a bathroom.
  • Loose tiles around a shower or on a bathroom floor.
  • A warm patch on a tiled floor.

Where leaks hide in Mascot homes

Galvanised pipe in older cottages and semis

The workers' cottages and semis in Mascot's older streets were often plumbed in galvanised steel. It rusts from the inside, narrowing the pipe and thinning the wall until it pinholes. The first signs are usually low pressure and rusty water, then a leak somewhere you can't see: under the floor, inside a wall, or at a threaded joint behind the laundry tub.

Leaks that vanish into the sand

Mascot is built on the Botany Sands, deep sand with groundwater close to the surface. Water leaking from a buried pipe drains straight down rather than spreading, so you often won't see a wet patch at all. The first sign is usually a higher water bill. The pipe from the meter to the house is the classic culprit, and it may have been in the ground for decades.

Shared walls in semis

In a semi, a leak in your wall can show up on your neighbour's side, and theirs on yours. Damp on a shared wall needs finding at the source, not just painting over. We work out which side the water is coming from before anything is opened up.

Apartments and townhouses

Mascot has plenty of newer apartments and townhouses. Shower leaks, failed waterproofing, split braided hoses and washing machine leaks show up as stains in the home below or next door. The newer homes also have plastic pipe in walls and slabs, where fittings can fail and leak quietly.

Toilets, hot water and irrigation

Some of the biggest leaks aren't in the walls at all: a toilet leaking into the bowl, a hot water relief valve running to the drain, or a garden irrigation line with a broken fitting. We always check these first.

Mascot homes and the leaks we find

Home typeMost common leakHow we usually find it
Workers' cottagesGalvanised pipe under the floor or in wallsIsolate the house, test sections, inspect under the floor
SemisShared wall and under-floor leaks, old water serviceSection testing and moisture readings on both sides
Post-war brick housesWater service across the front yardIsolate the service and test it on its own
Apartments near the stationShower and hose leaks into the unit belowFind the source in the unit above, then repair
Newer townhousesPipes in slabs and wallsSection testing, listening and moisture readings

How we find a leak

  1. Confirm it at the meter with everything off, and get an idea of how fast water is escaping.
  2. Rule out the usual suspects: toilets, the hot water relief valve, irrigation and garden taps.
  3. Split the system. We isolate the water service from the house, then sections inside, reading the meter each time.
  4. Pinpoint it by listening along the pipe, moisture readings and a look under the floor.
  5. Show you and price it. We explain where the leak is and give you a fixed price for each repair option.
  6. Fix and retest at the meter to make sure there's no second leak.

Galvanised pipe leaks

Leaking galvanised sections found, and repaired or replaced with copper or modern pipe.

Water service leaks

Leaks in sandy front yards found without digging up the whole lawn.

Under-floor and slab leaks

Leaks under timber floors and slabs narrowed down so only a small area is opened.

Shower and wall leaks

Leaks behind tiles and in walls traced to the pipe, mixer or seals.

Leaks into the home below

The source found in the unit or townhouse above, with a report for the owners.

Toilet and hot water leaks

Silent cistern leaks and running relief valves found and fixed.

Repair the leak or replace the pipe?

What we findRepair the spotReplace or reroute
One leaking joint on sound copperYesNot needed
Galvanised pipe pinholedA short-term fixReplace the galvanised section or the lot
Old water service leaking in sandIf the rest is soundA new service if it's old or leaked before
Hot pipe leaking in a slabIf reachableOften a reroute through a wall or ceiling
Shower mixer connection in the wallRepair the connectionA new mixer if it's old

What affects the cost

  • How long it takes to pinpoint: a toilet leak is quick; a slab leak takes more testing.
  • Where it is: subfloor, slab, wall or yard.
  • The repair: a joint, a section or a reroute.
  • Pipe condition: galvanised often needs more replaced.
  • Making good: lawn, paving, tiles or plaster.

You get a fixed price for each option before any repair starts.

Who's responsible?

  • Sydney Water: the main in the street and the meter.
  • You: every pipe on the house side of the meter, including the water service under the front yard.
  • Apartments: pipes in your own home are usually yours; shared pipes are usually the owners corporation's. A leak from the home above is usually that owner's to fix.
  • Semis: each owner looks after their own pipes; a shared water service, if there is one, is usually shared.

Quick checks before you call

  1. Turn off every tap and appliance, note the meter, use no water for an hour, then read it again.
  2. Put a few drops of food colouring in each toilet cistern. If colour shows in the bowl within 20 minutes without flushing, it's leaking.
  3. Check the hot water relief valve drain for a steady flow.
  4. Turn off the irrigation and any pool top-up and check if the meter stops.
  5. Look low on walls near showers and on ceilings below bathrooms for stains or bubbling paint.

Signs it's urgent and when it can wait

  • Call straight away if water is coming through a ceiling, near electrics, or the meter is spinning fast.
  • Call soon if the meter moves with everything off, or there's new damp on a wall or ceiling.
  • Book a time if your bill is a little higher than usual and you'd like it checked.

A recent water pipe repair nearby

Here's a recent water service repair nearby in Matraville, where a buried copper service was damaged and repaired without replacing the whole line.

Damaged copper water service repaired, Matraville (nearby)

The problem: a crane lifting a pool into the property next door damaged the buried copper water service in a Matraville backyard.

What we did: the pipe had been dug out and the water turned off when we arrived. Only the stretch under the lawn beside the paving was damaged, and the rest of the copper was sound, so we cut out the damaged length and joined in new copper and fittings.

The result: the water was back on in under an hour, every tap in the house ran properly, and the rest of the line didn't need replacing.

Repaired buried copper water service near Mascot
The repaired section, Matraville
New copper joined into a water service near Mascot
New copper joined in

More local work is on our recent projects page.

“I called [the team at] Scalici Plumbing Group to clear my blocked drain and fix my leaking toilet in Maroubra. Great company to deal with, highly recommended.”

Chris L., Maroubra (Google review)

Leaks across Mascot, area by area

  • The older streets south of the station: workers' cottages and semis with galvanised pipe and old water services.
  • On the lowest, flattest blocks: sandy ground where buried leaks drain away unseen.
  • Around Mascot station: apartment buildings where leaks show in the unit below.
  • Towards Botany and Eastlakes: post-war brick homes with water services across the front yard.
  • On former industrial land: newer townhouses and apartments with pipes in slabs.

Brown water, low pressure and leaks

In older Mascot homes, brown water first thing in the morning, low pressure at the shower, and a hidden leak often turn out to be the same problem: galvanised pipe at the end of its life. The rust that colours the water is the same rust thinning the pipe wall. Fixing the leak alone gets the water back on, but the next pinhole is rarely far away. If we find galvanised pipe, we'll show you and give you a fixed price to replace it in stages or all at once. See our galvanised pipes guide and brown hot water.

Bores and groundwater in Mascot

Groundwater under parts of Mascot and Botany is contaminated, and the NSW Government restricts using it from backyard bores. If you're thinking about a bore for the garden, use rainwater instead; we can fit a rainwater tank, pump and filter. If an old bore is connected to your plumbing in any way, it should be properly separated from the mains supply with the right backflow protection. If you're not sure how it's connected, we can check.

Leaks from upstairs or next door

A ceiling stain or a damp wall in a Mascot apartment or townhouse isn't always your plumbing. Water from a shower, bath or washing machine above or next door can travel a long way before it shows. We find where it's coming from first, so the right owner fixes it, and we'll give you a short written report with photos to pass on to them or the owners corporation.

Before a new bathroom or kitchen goes in

If you're about to put a new bathroom or kitchen into an older Mascot home, test the pipes first. With walls and floors open, replacing old galvanised or tired copper costs far less than finding and fixing a leak after the new tiles are down.

A typical cottage leak, step by step

  1. The owner's bill has gone up and the meter moves with everything off, but there's no wet patch anywhere.
  2. We check the toilets and the hot water relief valve. Both are fine.
  3. We isolate the water service at the house end. The meter keeps moving, so the leak is in the service under the yard.
  4. Listening along the line in the front yard picks up the sound of escaping water near an old joint.
  5. We dig at that point and find the old pipe has pinholed where it sat in the sand.
  6. We replace the damaged section, or the whole service if it's in poor condition.
  7. The meter is read again with everything off. It stays still.

Leak words explained

  • Water service: the pipe from the meter to the house.
  • Galvanised pipe: zinc-coated steel pipe used in older homes, which rusts from the inside.
  • Section testing: isolating parts of the plumbing one at a time and watching the meter.
  • Shared wall: the wall between two semis.
  • Relief valve: the safety valve on a hot water system.
  • Backflow protection: a device that stops water flowing back into the mains supply.

Outdoor pipes and fittings

Outdoor copper and brass, the pipes at the hot water system, garden taps and the meter connection all age in the weather. Green or white crust on a fitting is the first warning. A weep at a fitting outside may not look like much, but it runs day and night and in Mascot's sandy soil it often drains away into a garden bed where nobody sees it. Walk around the house every few months and look at every visible pipe and fitting.

Hot water leaks

Storage hot water systems leak in two main ways. The relief valve on top lets out water through a small drain pipe, and if it runs constantly it can point to high mains pressure or a faulty valve. The tank itself can also start to leak as it rusts through, usually from the bottom, and once that starts it can't be repaired. If there's water pooling under your hot water system, or the relief valve drain is always wet, mention it when you call. Continuous flow units in apartments and townhouses can also leak at their connections, often on a balcony wall where it's easy to miss. See relief valve dripping.

Dampness in cottages and semis

Many of Mascot's older cottages and semis have low timber floors with limited ventilation underneath. A slow leak under the floor keeps the ground damp and the air under the house humid, which is hard on the floor framing and can cause musty smells and mould inside. If your home smells musty, the floor feels soft in places, or there's mould at the bottom of walls, a hidden leak is one of the first things to rule out. Once it's fixed, clearing blocked subfloor vents helps the space dry out.

Washing machines and dishwashers in apartments

In apartments and townhouses, the washing machine and dishwasher are often in a cupboard or under a bench above someone else's ceiling. Their hoses are under mains pressure whenever the taps are on, and a split hose can run for hours. Replace machine hoses every few years, check dishwasher connections when you clean under the sink, and turn the machine taps off when you go away. If your laundry cupboard has no floor waste, a tray under the washing machine can catch a slow leak before it reaches the ceiling below.

While you wait for us

  • If water is visible and spreading, turn off the main stop tap at the meter.
  • Turn off the hot water at the switchboard, or set a gas unit to off, if hot water is leaking.
  • Move rugs, furniture and anything electrical away from the water.
  • In an apartment, let the neighbour below know, and the building manager if there is one.
  • Take photos of the damage and the meter reading.

A leak-check routine for Mascot homes

  • Each bill: compare usage with the same quarter last year.
  • Twice a year: do the meter test and the food colouring test on every toilet.
  • Every few months: look at outdoor pipes and fittings for crust or weeping.
  • Every few years: replace washing machine hoses and any braided hose showing rust or fraying.
  • Before going away: turn the water off at the meter if the house will be empty for more than a few days.

Common causes we find in Mascot

  • Galvanised steel rusting through at threads and elbows.
  • Copper rubbing on brick piers or bearers under low timber floors.
  • Joins between old and new pipe, especially copper joined to galvanised.
  • Old water services in sand that have lost their bedding.
  • Failed shower waterproofing in bathrooms from the 1980s and 1990s.
  • Perished braided hoses under sinks and toilets. See flexi hose replacement.
  • High mains pressure straining every fitting. A pressure limiting valve helps.

Leaks and the water bill

Water lost on your side of the meter goes through the meter, so you pay for it, and on most bills you also pay sewer usage on it. A small leak running all day adds up over a quarter. Keep our invoice describing the leak and the repair with your water account papers, and read the meter again a week or two after the repair to be sure it's still.

Leaks under concrete in newer Mascot homes

Townhouses and apartments on Mascot's former industrial land are mostly on concrete slabs, with water pipes running through the slab or in the walls just above it. A leak on the hot side can show as a warm strip of floor. A cold water leak is harder because there's no heat to follow, so we rely on section testing, listening and moisture readings at the edges of the slab. Once we know roughly where it is, the choice is usually between opening a small section of floor to repair it, or abandoning that pipe and running a new one through the walls or ceiling. Rerouting often causes less disruption. We'll price both.

More help in Mascot: taps and toilets; also burst pipes.

What happens when you call

1

Tell us what's going on

Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.

2

Options and a fixed price first

We find the cause, explain your options and give you a fixed price for each before any work starts.

3

Fixed, tested and backed

We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.

Why Mascot homeowners call us

  • Based in Matraville, a short drive from Mascot
  • Rated 5.0 from 110 Google reviews
  • Free quotes, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C)

Leak questions from Mascot homeowners

How do I know if I have a hidden leak?

Turn off every tap and appliance and watch the meter for an hour. If it moves, water is escaping.

Why is there no wet patch if the leak is outside?

Mascot's sandy ground lets water drain straight down, so a buried leak often leaves no puddle.

Is brown water a sign of a leak?

Often it's old galvanised pipe rusting inside, which also tends to leak. We check both.

My neighbour's wall is damp. Is it my pipe?

It could be either side. We find the source before anything is opened up.

Do you have to dig up my floor?

No. We narrow it down by section testing and open only where the leak is.

Is a leak at the meter my responsibility?

No. The meter and the street side are Sydney Water's.

Can you find leaks in apartments?

Yes, including leaks from the unit above. We give you a report for the other owner.

Can I use my old bore?

Check the current NSW rules first. There are groundwater restrictions in parts of the Mascot area.

How long does leak detection take?

Simple leaks are found quickly. Wall and slab leaks can take a few hours.

Can you fix the leak once it's found?

Yes, with a fixed price, often on the same visit.

Will insurance cover a hidden leak?

Many policies cover the damage but not always the pipe. Check your policy; we can provide a report.

Should I replace my galvanised pipes?

If they've started leaking or the water runs brown, usually yes, in stages or all at once.

More plumbing in Mascot: our Mascot plumber page, hot water, gas fitting and blocked drains. Nearby: leak detection in Botany and Pagewood. Guides: hidden water leaks, water meter guide and galvanised pipes.

Call 0401 758 373Free quote