★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Sewer repairs in Hillsdale 2036

We repair private sewer pipes in Hillsdale homes: cracked and root-filled clay sewers, displaced joints, broken junctions, overflowing gullies, boundary traps, sewer smells and vents, in cottages and unit blocks. Every job starts with finding the cause, using a drain camera where needed, then you get options (clear, patch, reline or dig and replace) with a fixed price for each before any work starts. Our workmanship carries a lifetime labour warranty.

Your private sewer carries everything from your toilets, showers, sinks and laundry to Sydney Water's sewer main. In Hillsdale, many of those pipes are the clay lines laid when the suburb was built after the war. They've done their job for decades, but clay joints crack, roots get in, and sand moves around them. When the sewer fails, you know about it quickly: slow drains, gurgling, a smell, or the overflow gully spilling in the yard. We're around the corner in Matraville and repair Hillsdale sewers every week.

Sewer repairs we do

Blocked sewers

Roots, grease and wipes cleared with a jetter or cutter.

Cracked and broken pipes

Damaged sections repaired, relined or replaced.

Root intrusion

Roots cut out and joints sealed so they can't get back in.

Overflowing gullies

Gullies cleared, raised or repaired so they work as they should.

Boundary traps

Old traps cleared, repaired or replaced, with access added.

Smells and vents

Traps, vents and cracked pipes found and fixed.

Signs of a sewer problem

  • The overflow gully spills or the water sits high in it.
  • Several drains are slow at the same time.
  • Gurgling from basins, showers or the toilet.
  • Water rises in the shower or floor waste when you flush.
  • A sewer smell inside or in the yard.
  • Soggy, sunken or lush patches along the drain line.
  • The toilet blocks often.
  • Rats or cockroaches around the yard drains.

Why sewers fail in Hillsdale

Clay pipes and joints

Most older Hillsdale sewers are vitrified clay pipe in short lengths, joined with mortar or early rubber rings. After seventy years or so in the ground, the joints crack, open up or shift out of line. Each joint is a weak point, and a typical house sewer has dozens of them.

Tree roots

Roots find the gaps at clay joints and grow inside, forming a mat that catches paper and waste. Cutting them out clears the drain, but they grow back through the same gaps unless the joints are sealed.

Sandy ground

Hillsdale's deep sand moves with water. That movement can push pipes out of line, open joints and create bellies where waste settles. Sand can also wash into cracked pipes.

Grease and wipes

Fat and oil from kitchens cool and set inside the pipe, especially where it's rough or has a step at a joint. Wipes, even 'flushable' ones, don't break down and catch on roots and joints.

Shared lines in unit blocks

Walk-up blocks usually have shared sewer lines and stacks. A problem on the shared line affects every unit connected to it. Your own branch may be fine while the shared line is blocked, or the other way around.

Hillsdale homes and sewers

Home typeTypical sewerCommon faults
Three-storey unit blocksShared clay or early PVC lines and stacksGrease, roots, blockages affecting several units
Post-war cottagesOriginal clay to a boundary trapRoots, cracks, displaced joints
Former Housing Commission homesOriginal clay with some PVC repairsPoor joins between old and new pipe
Newer homes and apartmentsPVC, sometimes connected to older linesProblems where new meets old

How we repair a sewer

  1. Talk it through: what's happening, which fixtures are affected, any past work.
  2. Clear the blockage if there is one, so the home is usable.
  3. Camera the line and show you the footage.
  4. Locate the damage on the ground.
  5. Give you options: clear, patch reline, full reline, or dig and replace, each with a fixed price.
  6. Do the repair.
  7. Camera again to confirm the result.

Which repair suits?

ProblemUsual repair
Roots at a few jointsCut roots, then patch reline the joints
Roots along the whole lineFull-length reline
Collapsed sectionDig and replace that section
Belly holding wasteDig and relay, or monitor if minor
Grease build-upJet clean and advise on what goes down the sink
Broken junctionJunction repair or replacement

See pipe relining in Hillsdale.

What affects the cost

  • The type of repair and how many sections.
  • Depth and location of the pipe.
  • What's on top: lawn, paving, concrete or a building.
  • Access points, and whether one needs to be added.
  • Making good after any digging.

You get a fixed price for each option before any work starts.

Who's responsible?

  • You: the private sewer from your home to the point where it connects to the sewer main.
  • Owners corporation: shared lines and stacks in a unit block.
  • Sydney Water: the sewer main and, in most cases, the connection to it.

See our sewer responsibility guide. If the camera shows the problem is on Sydney Water's side, we'll give you the footage and a note to report it.

Quick checks you can do

  1. Find your overflow gully and check the water level and grate.
  2. Run a tap and listen for gurgling elsewhere.
  3. Flush the toilet and watch the shower floor waste.
  4. Walk the drain line for soggy or sunken ground.
  5. Note how often drains block.

Signs it's urgent and when it can wait

  • Call straight away if sewage is coming up through the gully, a floor waste or the toilet.
  • Call soon if every drain is slow or there's a strong smell.
  • Book a time if a drain blocks every few months, or you'd like a camera check.

A recent sewer job nearby

Here's a recent drain job nearby in Little Bay, where the overflow gully showed us the blockage was further down the line.

Grease blockage jetted from a kitchen line, Little Bay (nearby)

The problem: a blocked kitchen sink in a Little Bay home was pushing dirty water back into the dishwasher.

What we did: the overflow gully outside the kitchen window was spilling, so we knew the blockage was further down the line. It was grease built up inside the pipe. We cleared it with the high-pressure jetter, which broke the grease up and flushed it away.

The result: we filled both sink bowls and released them together to flush the line and confirm it all ran freely.

Drain jetter at an overflow gully near Hillsdale
Jetting from the gully, Little Bay
Overflow gully clear after jetting near Hillsdale
The gully running clear

“Best plumber in Matraville. Unblocked my drains efficiently!”

C S, Matraville (Google review)

More local work is on our recent projects page.

Sewer repairs across Hillsdale

  • Unsted Crescent and the unit streets: shared lines from walk-up blocks, often with grease from several kitchens.
  • Rhodes Street and the cottage streets: original clay sewers under back yards and side paths.
  • Along Bunnerong Road: older lines meeting newer connections near Southpoint.
  • Near Wentworth Avenue: mature trees on the Eastgardens side and roots in joints.
  • Near Matraville Public School: older cottages shared with the Matraville side.

Your overflow gully: the early warning

Every house sewer should have an overflow relief gully, a grated outlet in the yard, usually near the kitchen or laundry. It sits lower than the floor drains inside, so if the sewer blocks, sewage spills out in the yard instead of coming up through your shower or toilet. In Hillsdale, we often find gullies that have been covered by paving, raised too high by new landscaping, or set lower than they should be so garden water runs into them. A gully that can't do its job means a blockage shows up inside the home first. We check gullies on every sewer job and fix them if they're not working as they should. If yours is buried or hard to find, we can locate it.

Boundary traps

Many older Hillsdale homes have a boundary trap near the front boundary, where the private sewer connects to Sydney Water's system. These traps have a water seal that stops sewer gases coming back up the house line, and an inspection opening at the top. Over the years, the opening may be buried, the cap lost, or the trap itself cracked. Boundary traps are also a common place for blockages, because waste has to turn a corner and rise through the trap. We clear and repair boundary traps, add a proper access point if needed, and make sure the cap is in place.

Grease in unit block sewers

In a walk-up block, several kitchens drain into the same sewer line. Each one sends a little fat and oil down the sink, and over time it builds up into a thick layer inside the pipe. Once grease narrows the pipe, food scraps and paper catch on it and the line blocks. Jetting with high-pressure water breaks the grease up and flushes it away, leaving the pipe clean. If a shared line blocks with grease again and again, it's worth a camera check to see whether there's also a step at a joint or a belly that's holding the grease. A short reminder to residents about what not to put down the sink helps too.

Sewer smells

A sewer smell in or around a Hillsdale home has a cause, and it's worth finding. Common culprits are a dry trap in a floor waste or a rarely used basin, a leaking toilet pan connector, a loose cap on an inspection opening, a cracked pipe under the floor, or a vent pipe that's blocked or broken. We work through the likely causes in order, starting with the simplest. A smoke test can show exactly where gas is escaping from the drain system. Fixing the cause stops the smell for good. See sewer vent pipes.

Inspection openings

An inspection opening is a capped fitting on the sewer that gives direct access for cleaning and cameras. Many older Hillsdale homes have very few, so the only way in is through the gully or the boundary trap. Adding an inspection opening at a convenient point, such as near where the line leaves the house, makes every future clear or camera inspection quicker and cheaper. It's often done at the same time as a repair. See sewer inspection openings.

Before you buy in Hillsdale

If you're buying an older Hillsdale cottage or unit, a CCTV sewer inspection is a sensible check. Standard building inspections usually don't cover the underground pipes. The camera shows the condition of the private sewer, any roots or cracks, and whether repairs are likely soon. You get the footage and a plain explanation, so you can factor it into your decision.

Reading the camera footage

We'll show you the footage and explain what you're seeing. Fine hair-like roots or thick clumps at a joint are root intrusion. A step or dark gap is a displaced joint. A line running along or around the pipe is a crack. A pile in the bottom of the pipe is sand or debris. Water sitting in one spot is a belly. A white or grey lining is usually grease. Each points to a different repair, and some may not need fixing straight away.

Sewer problems under unit blocks

In Hillsdale's three-storey walk-ups, the sewer stacks run down through the building and join lines that run under the ground floor or along the side of the block to the street. When something goes wrong, ground-floor units usually feel it first: water backing up into a shower or floor waste, a toilet that won't flush, or a smell in the bathroom. Upstairs residents may not notice anything at all until the blockage gets worse. If you're on the ground floor and your drains back up when upstairs neighbours use water, the problem is almost certainly in the shared line.

Shared lines are usually the owners corporation's responsibility, but residents are often the ones who call. We can clear the blockage so everyone can use their bathrooms again, camera the line, and provide footage and a short written note for the owners corporation explaining what we found and what needs doing. If the problem turns out to be in your own branch line, we'll tell you that too, so there's no confusion about who should arrange the repair.

Sewers, sand and sinking ground

Because Hillsdale sits on deep sand, a cracked or open sewer joint can cause problems above ground as well as inside the pipe. Water leaking out of the pipe washes sand away, and the ground above can slowly sink. You might see a dip in the lawn, a sunken paver, or a crack in a concrete path along the line of the sewer. Sometimes sand washes into the pipe instead and builds up, causing slow drains and blockages. Either way, the joint needs sealing. Relining usually fixes it without digging, and the ground can then be topped up and levelled.

Digging when it's needed

Relining suits most cracked and root-damaged sewers, but not all. A section that has collapsed, been crushed, or sags badly so waste sits in it may need to be dug up and replaced. In Hillsdale's sand, digging is usually straightforward in an open garden, though deep excavations need shoring to keep the sides from caving in. Where the damaged section is under concrete or paving, we cut out only what's needed and make good afterwards. We'll show you on the camera why we recommend digging for that section, and give you a fixed price that includes reinstating the surface.

When the problem is Sydney Water's

Sometimes the camera shows that your private sewer is fine, and the blockage or damage is at the connection to the main or in the main itself. In that case, the repair is Sydney Water's responsibility. We'll stop at that point, give you the footage and a short note showing where the problem is, and you can report it to Sydney Water. That way you're not paying for work on a pipe that isn't yours.

Old cottages with additions

Many Hillsdale cottages have had extensions over the years: an enclosed back verandah, a new bathroom, a second toilet in the laundry, or a granny flat out the back. Each addition connected to the existing sewer, often with a new length of PVC joined onto the old clay. Those joins are common trouble spots, especially where the new pipe was laid at a slightly different grade or the join wasn't made with the right fitting. The camera shows us exactly where old meets new, and whether the join is sound. If a sewer line runs under an extension, relining is usually the best way to repair it without disturbing the floor.

Why we camera before quoting

Guessing at sewer repairs is expensive. A drain that blocks every few months might have one root-filled joint, or damage along its whole length. Without a camera, a plumber could quote for far more work than you need, or far less, and you'd only find out later. We camera the line, measure and locate each problem, and show you the footage before recommending anything. That way, you only pay for the work your sewer actually needs, and you can see why.

You'll get the footage to keep, which is handy if you sell the home, need to show the owners corporation, or want to compare with a future inspection.

Looking after your sewer

  • Don't put fats, oils or grease down the sink. Wipe pans with paper first.
  • Only flush toilet paper. Wipes, even 'flushable' ones, cause blockages.
  • Use sink strainers to catch food scraps.
  • Keep the overflow gully grate clear and visible.
  • Don't plant trees close to the sewer line.
  • Consider a camera check every few years on older clay lines.

What to expect on the day

We give you a time window and let you know when we're on the way. If the sewer is blocked, we clear it first so you can use the home. Then we camera the line, show you what we found, and explain your options with a fixed price for each. Small repairs are often done on the same visit. Larger repairs like relining or digging are booked at a time that suits you. We protect the area we're working in, and tidy up when we're done.

A sewer you can forget about

The goal of any sewer repair is a line you don't have to think about. That means clearing the blockage, finding the cause, and fixing it properly so it doesn't come back. For many Hillsdale homes, that's a patch reline at a couple of root-filled joints and a properly working gully. For others, it's a full-length reline or replacing a collapsed section. Whatever your sewer needs, you'll see the footage, understand the options and know the fixed price before any work starts. Our workmanship carries a lifetime labour warranty, so if a repair we've done fails, we come back and make it right.

If you've had the same drain cleared more than once in the past year, or you can smell sewage around the yard, call us. We'll find out what's going on and give you a clear plan to fix it.

Sewer words explained

  • Private sewer: the pipes from your home to the sewer main.
  • Sewer main: Sydney Water's pipe, usually under the street or a back lane.
  • Overflow relief gully: a grated outlet in the yard that relieves a blockage outside the home.
  • Boundary trap: a fitting near the front boundary with a water seal and inspection opening.
  • Junction: where a branch line joins the main house line.
  • Displaced joint: where two lengths of pipe have moved out of line.
  • Belly: a dip in the pipe where water and waste sit.

What happens when you call

1

Tell us what's going on

Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.

2

Options and a fixed price first

We find the cause, explain your options and give you a fixed price for each before any work starts.

3

Fixed, tested and backed

We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.

Jobs we finished recently

Jetting a blocked drain in Maroubra
Jetting a blocked drain in Maroubra
New stormwater pipe in Maroubra
New stormwater pipe in Maroubra

See more recent projects

Why Hillsdale homeowners call us

  • Based in Matraville, around the corner from Hillsdale
  • Rated 5.0 from 110 Google reviews
  • Free quotes, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C)

Sewer repair questions from Hillsdale homeowners

How do I know if my sewer is damaged?

Repeat blockages, gurgling, smells and an overflowing gully are common signs. A camera confirms it.

What is an overflow gully?

A grated outlet in the yard that lets sewage out outside, not inside, if the sewer blocks.

Can roots be stopped for good?

Yes, by sealing the joints with relining.

Do you always need to dig?

No. Many repairs are done by relining from an access point.

Who fixes the sewer in a unit block?

Shared lines are usually the owners corporation's.

What is a boundary trap?

A fitting near the front boundary where many older sewers connect to the main.

Can you find where my sewer runs?

Yes, with a camera and locator.

Why does my bathroom smell of sewage?

Often a dry trap, a leaking pan connector, a vent problem or a cracked pipe.

Is the sewer main my responsibility?

No. Sydney Water looks after the main.

How long does a repair take?

Clearing takes an hour or two. Relining or replacing a section usually takes a day.

Can you check a sewer before I buy?

Yes. A CCTV inspection shows its condition.

What warranty do I get?

Our workmanship carries a lifetime labour warranty.

More plumbing in Hillsdale: our Hillsdale plumber page, blocked drains, pipe relining and stormwater. Nearby: sewer repairs in Pagewood and Matraville. Guides: sewer responsibility, sewer inspection openings and tree roots in pipes.

Call 0401 758 373Free quote