★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Tap repairs in Matraville 2036

We repair and replace taps in Matraville homes: dripping washer taps, leaking mixers, stiff or loose handles, weak flow, laundry and washing machine taps, garden taps and shower taps leaking behind the tiles. Our workshop is in Matraville, you get a fixed price before any work starts, and our workmanship has a lifetime labour warranty.

A dripping tap is easy to put up with, until you see the water bill or the stain in the basin. A tap leaking inside a wall is worse, because you don't see it until the damage is done. We're based on Girawah Place in Matraville and fix taps in homes all over the suburb, from original post-war houses to new duplexes and townhouses.

Tap problems we fix in Matraville

Dripping washer taps

New washers, jumper valves and O-rings, and worn seats re-cut so the tap shuts off properly.

Leaking mixers

Cartridges replaced with the right part for your brand, or the mixer replaced if that's better value.

Shower and bath taps

Wall taps repaired or upgraded, and leaks behind tiles found and fixed.

Laundry and machine taps

Old laundry taps and washing machine stop taps replaced with quarter-turn valves.

Garden taps

Seized, cracked and dripping outdoor taps replaced with quality brass.

New taps

Kitchen, basin, laundry and outdoor taps supplied and fitted.

Signs a tap needs repair

  • Dripping from the spout after it's turned off.
  • Water around the handle or base, or water in the cabinet under the sink.
  • A handle that's stiff, spins without stopping, or needs turning very hard to stop the drip.
  • Banging or shuddering when you turn the tap off.
  • Weak flow from one tap while the others are fine.
  • Damp, mould or loose tiles around a shower or bath tap.
  • An outdoor tap that drips or won't turn.

Why taps wear out in Matraville homes

Original washer taps in post-war houses

Many of the brick and fibro homes around Bunnerong Road, Franklin Street and Australia Avenue still have traditional washer taps in the laundry, and often in the bathroom too. Washers harden and the brass seats inside the taps wear grooves over decades of use. A new washer on a worn seat won't seal for long, so we re-cut the seat as part of the repair.

Early mixers and ceramic disc taps

Homes updated in the 1990s and 2000s often have early mixers and ceramic disc taps. These are now at the age where cartridges and discs wear out. Some older cartridges are no longer made, which is when replacing the mixer can make more sense.

New homes and imported tapware

Duplexes and townhouses on redeveloped Matraville blocks often have imported mixers. Some are excellent; some use cartridges that are hard to find. We identify the brand and model before ordering parts.

Outdoor taps in the weather

Garden taps get knocked by mowers, left half-on and baked by the sun. Sea breezes carry salt across this part of Sydney, and brass and chrome outside corrode faster than inside. Seized garden taps that snap when forced are a common call-out.

Water pressure

High pressure wears washers and cartridges faster and makes taps bang. If several taps are wearing out quickly, a pressure limiting valve at the meter is worth considering. See pressure limiting valves.

Taps in different Matraville homes

Original post-war houses

Separate hot and cold taps in the laundry and bathroom, a washing machine stop tap pair that hasn't been turned in years, and often no isolating valves under the basin or sink, so the water has to be turned off at the meter.

Updated and extended homes

A mix of old and new: original laundry taps, a renewed kitchen with a mixer, and an ensuite added in an extension with wall mixers.

Duplexes and townhouses

Mixers throughout, often with isolating valves under each one, and wall mixers in showers. Most faults are cartridges and O-rings.

Granny flats and units

Small kitchens and bathrooms with mixers. A slow leak under a kitchenette sink can go unnoticed for a long time, so it's worth a look now and then.

Laundry taps: repair or upgrade?

In many original Matraville homes, the laundry is the least-changed room in the house. The tub taps, the washing machine taps and the pipes behind them may all be 50 or more years old. If the tub taps drip and the machine taps won't shut off, it can be worth upgrading the lot in one go: a single mixer over the tub, quarter-turn machine valves, and new hoses to the washing machine. It costs more than one washer, but it fixes several worn parts at once and makes the laundry much easier to live with.

Kitchen mixers compared

TypeGood forWatch out for
Standard lever mixerMost kitchens, easy to use and repairCheap models with hard-to-find cartridges
Pull-out or pull-down mixerRinsing big pots and the sinkThe hose and its weight can wear over time
Gooseneck mixerDeep sinks and filling tall potsSplashing in shallow sinks
Mixer with filter outletFiltered drinking water from one tapNeeds room under the sink for the filter

Hot taps that run cold or too hot

If the hot tap takes ages to warm up, runs lukewarm, or is scalding, the problem is usually not the tap. It may be the hot water system, a tempering valve that controls the temperature to the bathrooms, or long pipe runs in a big or extended home. We check the whole hot water side, not just the tap. See hot water in Matraville.

Outdoor taps, hose taps and outdoor showers

Plenty of Matraville backyards have a hose tap at the back step, one at the side for the car, and maybe an outdoor shower by the pool. They get used hard and left in the weather. Common faults are a tap that drips from the spout, a cracked hose connector, a tap that's come loose from the wall, and a seized tap that snaps when forced. We replace them with solid brass taps, fix them firmly to the wall, and can add a vacuum breaker where needed to stop garden water being drawn back into the house pipes.

Why fix a dripping tap now

A drip doesn't look like much, but it goes all day and all night. Over a quarter it adds up on the water bill, and a dripping hot tap wastes the energy used to heat the water as well. Drips stain basins and leave scale, and a tap left dripping usually gets worse as the washer or cartridge wears further. Fixing it early is almost always the cheapest option.

Taps that bang, shudder or whistle

A tap that bangs when you turn it off is usually water hammer: the water stops suddenly and the shock travels through the pipes. Loose pipes under the floor or in the wall make it worse. A tap that shudders while running often has a loose jumper valve or worn washer flapping in the flow, and a whistle can mean a worn part or high pressure. We find which it is, fix the tap, secure loose pipes, and check the pressure at the meter. See water pressure guide.

Shower taps and the wall behind them

Shower and bath taps are the ones most likely to cause hidden damage. The tap body sits inside the wall, sealed to the tiles. If the body, the pipe joint behind it or the seal around it fails, water runs into the wall cavity every time you shower. In older Matraville bathrooms this often shows as loose or drummy tiles, mould along the bottom of the wall, paint bubbling in the hallway, or rot in the timber floor near the shower. If you see these signs, it's worth getting it checked before you re-grout or re-seal, because new grout won't stop water coming from behind. See bath leaking through the ceiling.

Upgrading old taps while you're at it

If we're already repairing one tap, it's often worth thinking about the others of the same age. Converting old washer taps to ceramic disc spindles gives you quarter-turn taps that are easier on the hands and last longer, without replacing the tap bodies. Adding isolating valves under basins and sinks means next time a tap needs work, the rest of the house keeps its water. These are small jobs that make a big difference to living with older plumbing.

Kitchen sink leaks that aren't the tap

Water in the cabinet under the kitchen sink isn't always the tap. The flexible hoses that feed the mixer, the isolating valves, the dishwasher connection and the sink waste and trap can all leak. In older Matraville kitchens, the waste pipe may still be old metal or early plastic that has cracked. We check everything under the sink, not just the tap, so the cabinet stays dry. If the base of the cabinet has swollen, it's a sign the leak has been going for a while.

Taps and filtered water

Some Matraville homeowners ask us to add filtered drinking water when they replace a kitchen tap. You can have a separate small filter tap beside the mixer, or a mixer with a built-in filtered outlet, with the filter cartridge under the sink. Filters need changing on a schedule, so we fit them where they're easy to reach. See water filters in Matraville.

How we repair taps

  1. Turn the water off at the isolating valve, or at the meter if there isn't one (we'll tell you first).
  2. Take the tap apart and find the cause: washer, seat, jumper, O-ring, cartridge or the tap body.
  3. Give you options to repair or replace, with a fixed price for each.
  4. Repair or replace with quality parts, re-cutting worn seats where needed.
  5. Test for drips, leaks and flow, and check the isolating valves and hoses.

Fixing a dripping washer tap, step by step

  1. Isolate the water and open the tap to drain it.
  2. Put a towel in the basin to protect it and catch small parts.
  3. Remove the handle and cover, freeing any scale carefully.
  4. Unscrew the spindle and take out the jumper valve and washer.
  5. Check the brass seat. If it's pitted, re-cut it smooth.
  6. Fit a new washer, jumper and O-rings, or a ceramic disc spindle.
  7. Reassemble, turn the water on and test on and off several times.

Repair or replace?

ProblemUsually a repairUsually a replacement
Washer tap drippingNew washer and re-cut seatTap body cracked or badly corroded
Mixer drippingNew cartridgeCartridge not made any more
Leak at the handleNew O-rings or cartridgeBroken handle or body
Garden tap seizedFree it and service itCorroded or snapped tap
Shower tap leaking in the wallRepair the body or connectionNew mixer while the wall is open

Tap types in Matraville homes

Tap typeWhere you'll see itCommon faults
Washer (jumper valve) tapsOriginal laundries and bathrooms, garden tapsDrips, worn seats, stiff handles
Ceramic disc taps1990s and later bathroomsDrips from chipped or dirty discs
Single-lever mixersKitchens, newer bathrooms, duplexesDrips, leaks at the base, stiff lever
Wall shower mixersShowers and bathsDrips at the rose, leaks behind tiles
Washing machine stop tapsLaundriesWon't shut off, leak at the spindle

What affects the cost

  • The tap type: washer taps are quick; mixers depend on the cartridge.
  • How many taps: doing several at once saves another call-out.
  • Access: tight cabinets and taps behind tiles take longer.
  • Parts: some imported mixers need parts ordered.
  • A new tap: depends on the model you choose.

You get a fixed price before any work starts.

Who's responsible?

  • You (the homeowner): all taps and pipes on the house side of the meter.
  • Sydney Water: the meter and the main in the street.
  • Duplexes and units: taps in your own home are yours; shared pipes are shared.

Quick checks you can do

  1. Spout or handle? Dry the tap and watch. Spout drips point to the washer or cartridge; water at the handle points to O-rings or the cartridge.
  2. Weak flow? Unscrew the aerator at the end of the spout and rinse out grit.
  3. Isolating valves? Check under the sink. If they won't turn, they're worth replacing.
  4. Wall leak? Turn the shower off firmly and check the wall and floor outside the shower over the next day.

What our customers say

“Great plumber, fixed my leaking taps quickly and at a great price!”

Tom (Google review)

Our recent tap repair near Matraville

Leaking taps fixed in the same visit as a drain clear, Maroubra

The problem: a Maroubra home, next door to Matraville, had slow drains and leaking tapware.

What we did: we protected the floor, cleared the drains with high-pressure jetting, then repaired the leaking taps in the same visit.

The result: the taps shut off properly and the drains flow freely, without a second call-out.

Floor protected during plumbing work near Matraville
Floor protected while we work
Drain jetting near Matraville
Clearing the drains in the same visit

More local jobs are on our recent projects page.

Taps across Matraville, area by area

  • Around Bunnerong Road and Franklin Street: original washer taps, laundry taps and stop taps that haven't been turned in years.
  • Off Australia Avenue: updated kitchens with mixers alongside original laundries.
  • Near Heffron Park: garden taps and outdoor showers that take a beating from sun and weather.
  • Rebuilt blocks: duplexes and townhouses with imported mixers and wall shower mixers.

Signs a tap problem is urgent and when it can wait

  • Call us soon if a tap won't turn off, water is leaking into a wall, cabinet or floor, or a tap body has cracked.
  • Book a time if a tap drips slowly, a handle is stiff, or a garden tap drips.
  • Mention it on our next visit if a tap is a bit noisy or an aerator sprays sideways.

A tap care checklist

  • Rinse aerators every few months.
  • Turn isolating valves off and on once a year so they don't seize.
  • Turn the washing machine taps a few times a year.
  • Check garden taps after summer.
  • Look under sinks for damp or swelling.
  • Don't over-tighten washer taps; it wears the washer and seat faster.

Tap words explained

  • Washer: the rubber disc that seals against the seat.
  • Jumper valve: the part the washer sits on.
  • Seat: the brass ring inside the tap that the washer closes on.
  • Cartridge: the unit inside a mixer that controls flow and temperature.
  • Aerator: the screen at the end of the spout.
  • Isolating valve: a small stop tap under a sink or basin.

Choosing a new tap

  • Match the holes in your sink or basin.
  • Choose solid brass, especially outdoors.
  • Check the WELS rating to save water.
  • Pick a brand with spare parts that will still be around in ten years.
  • Consider a filter tap in the kitchen. See water filters in Matraville.

A word on very cheap tapware: online bargains often use zinc or plastic bodies and cartridges no one stocks. They can look fine for a year or two, then drip with no repair possible. A mid-range tap from a known brand usually costs less over its life because it can be repaired. If you're unsure, send us the model before you buy and we'll tell you what we think.

What to expect on the day

We give you a time window and let you know when we're on the way. Most tap repairs are done in one visit with parts from the van. If a mixer needs a special cartridge, we'll order it and come back. We protect benchtops and floors, and point out any other taps that are close to needing attention so you can decide whether to do them at the same time.

Before you go away: taps and an empty house

A dripping tap is a nuisance while you're home. While the house sits empty for a few weeks, a worn washing machine hose or a weeping mixer connection under the kitchen sink can do real damage, because no one is there to notice the water. Before a long trip, a few minutes of checks go a long way:

  • Turn off the washing machine taps so the hoses aren't holding mains pressure while you're away.
  • Look under every sink and basin for damp, swollen cabinet bases or rust on the braided hoses. Braided hoses that are frayed or kinked are worth replacing before they burst.
  • Check the garden taps are fully off and the hose isn't left on with a trigger nozzle.
  • Take a meter reading before you leave and again when you get home. If the numbers moved and nobody was there, something is leaking.
  • Know where your meter tap is. On most Matraville blocks it's near the front boundary, sometimes hidden by garden beds or a front fence.

If anything looks tired, book us in before you go and we'll replace the hoses and service the taps in one visit. See leak detection in Matraville.

What happens when you call

1

Tell us what's going on

Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.

2

Options and a fixed price first

We find the cause, explain your options and give you a fixed price for each before any work starts.

3

Fixed, tested and backed

We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.

Jobs we finished recently

Toilet before repair in Chifley
Toilet before repair in Chifley
Toilet after repair in Chifley
Toilet after repair in Chifley

See more recent projects

Why Matraville homeowners call us

  • Based in Matraville, with our workshop on Girawah Place
  • Rated 5.0 from 110 Google reviews
  • Free quotes, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C)

Tap repair questions from Matraville homeowners

Why does my tap still drip with a new washer?

The brass seat inside the tap is probably worn. We re-cut the seat so the new washer seals properly.

Can you repair my mixer tap?

Usually, with a new cartridge. If the cartridge isn't made any more or the mixer is old, a new mixer can be better value.

Why is there water in the cabinet under my sink?

It could be the mixer base, a flexi hose, an isolating valve or the waste pipe. We find which one and fix it.

My shower tap leaks behind the tiles. Can you fix it?

Yes. We find the leak and repair or replace the tap body or connection with as little tile removal as possible.

Do I need to turn off all the water?

Only if the tap has no isolating valve. Many older Matraville homes don't, so we turn it off at the meter briefly and can fit isolating valves while we're there.

Why does my garden tap keep seizing?

Sun, weather and corrosion are hard on outdoor taps. A quality brass tap and regular use help.

Can you replace my washing machine taps?

Yes. We replace old machine taps with quarter-turn valves that are easy to shut off, and can fit new hoses.

Can you supply the tap?

Yes, or we can fit one you've bought. Send us the model first so we can check it suits your sink or basin.

How long does a tap repair take?

Most take less than an hour. Wall taps and replacements can take longer.

Why does my hot tap take so long to warm up?

Usually because of a long pipe run from the hot water system, or a tempering valve or system problem. We check the hot water side as well as the tap.

What's a vacuum breaker on a garden tap?

A small fitting that stops dirty water from a hose being drawn back into your home's pipes. We can fit one to outdoor taps where it's needed.

Can you fix several taps in one visit?

Yes. Doing them together saves you another call-out.

More plumbing in Matraville: our Matraville plumber page, taps and toilets, toilet repair, leak detection, burst pipes and water filters. Nearby: tap repairs in Maroubra and Malabar. Related: mixer tap leaking, ceramic disc vs washer taps and dripping taps guide.

Call 0401 758 373Free quote