★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Burst pipe repairs in Banksmeadow 2019

We repair burst water pipes on Banksmeadow industrial sites and at the homes near Botany: mains broken under yards and driveways, pipes hit by excavators, forklifts or trucks, split copper and galvanised pipe in amenities, burst flexible hoses under sinks and toilets, and broken hose taps on loading docks. We get the water off, find the break, repair it and test it, and give you a fixed price before any work starts. We offer same-day service.

A burst pipe on a business site isn't just a mess. It can shut down the amenities, flood stock or an office, and leave a whole complex without water. On Banksmeadow's industrial sites, pipes get broken in ways they rarely do at home: an excavator digging a footing, a forklift backing into a riser, a truck clipping a hose tap or a heavy load settling over a shallow main. We're based a few minutes away in Matraville, and we repair burst mains and service pipes on sites and homes across the area.

Burst pipes we repair in Banksmeadow

Mains under yards and roads

Broken water mains under concrete yards, driveways and internal roads, found and repaired.

Pipes hit by machinery

Pipes damaged by excavators, forklifts, trucks and cranes, cut out and replaced.

Split pipes in amenities

Copper and galvanised pipe split or pinholed in walls, ceilings and amenities.

Burst flexible hoses

Braided hoses under sinks, toilets and boiling water units that burst and flood.

Broken hose taps and risers

Hose taps and risers on docks and yards knocked off by vehicles.

Homes near Botany

Burst pipes in the yards, walls and under the floors of homes on the Botany side.

What to do when a pipe bursts

  1. Turn off the water. Find the main stop valve, usually at the water meter near the boundary, and turn it off. On a large site there may be valves for each building or unit.
  2. Turn off power to any area where water is near electrics, if it's safe to do so.
  3. Move stock and equipment away from the water.
  4. Call us and tell us where the burst is and whether the water is off.
  5. Take photos for your insurer or the site owner.

Signs of a burst pipe

  • Water spraying or pouring from a pipe, fitting or hose.
  • Water coming up through the ground, a crack in the concrete or the road surface.
  • A sudden drop in pressure across the site.
  • Water through a ceiling or down a wall in an office or amenities block.
  • The meter spinning fast when little or nothing is being used.
  • A loud hiss from a wall or the ground.

Why pipes burst on Banksmeadow sites

Machinery and vehicles

On a busy industrial site, pipes are always at risk from machinery. An excavator digging for a new footing or service can catch a pipe that's not on any plan. A forklift can hit a riser or hose tap. A crane or heavy load can crush a shallow service, as happened at a Matraville home when a pool was craned in next door. Damage like this is sudden and usually needs the section cut out and replaced.

Old cast iron and galvanised pipe

Older sites can still have cast iron or galvanised steel water pipe underground and in buildings. Cast iron becomes brittle and cracks, and galvanised rusts from the inside until it splits. Once one section of old pipe fails, others usually aren't far behind.

Sandy ground that settles

On Banksmeadow's sandy, reclaimed ground, the bedding under a pipe can wash out or settle. A pipe that loses its support under a heavy load is stressed at its joints, and eventually a joint pulls apart or the pipe cracks.

High mains pressure

High water pressure puts constant strain on pipes, fittings and hoses. Water hammer, the bang when a tap or solenoid valve shuts quickly, adds sudden spikes. Both shorten the life of pipes and are a common cause of burst flexible hoses.

Corroded hoses and fittings

Braided flexible hoses under sinks, toilets and boiling water units are under mains pressure all the time. In salty bay air their stainless braid can corrode, and once the braid weakens, the hose can burst without warning.

Banksmeadow sites and burst pipes

Type of siteCommon burstsWhat we do
Factory complexesShared main under internal roads, risers hit by vehiclesFind and repair, protect risers
Warehouses and yardsLong underground services, hose taps on docksRepair or replace sections, fit heavier hose taps
WorkshopsPipes damaged during fit-outs, burst hosesReplace damaged pipe, upgrade hoses
Offices and showroomsBurst hoses under sinks and boiling water units, pipes in ceilingsReplace hoses, repair pipes, protect ceilings
Homes near BotanyOld galvanised or copper services, burst hosesRepair, or replace old pipe in stages

How we repair a burst pipe

  1. Make it safe. We confirm the water is off and isolate as small a part of the site as we can.
  2. Find the break. If it's underground, we expose the pipe carefully. If the leak isn't obvious, we use tracer gas or acoustic listening.
  3. Repair it. We cut out the damaged section and join in new pipe and fittings. If a repair band isn't suitable, a new section goes in.
  4. Test it. We turn the water back on, check for leaks and confirm the meter has stopped moving.
  5. Make good. We backfill with clean sand and fill, and tell you if concrete or asphalt needs reinstating.
  6. Explain the cause and whether more of the pipe is likely to fail.

A recent job nearby

Here's a recent burst pipe job in Matraville, just up the road from Banksmeadow.

Copper water service repaired after crane damage, Matraville (nearby)

The problem: while a swimming pool was being lifted into the property next door by crane, the copper water pipe buried in a Matraville backyard was damaged.

What we did: by the time we arrived the damaged pipe had been exposed and the water was already off. We cut out the damaged section and joined in new copper pipe and fittings, then turned the water back on.

The result: every tap in the house was tested and running properly, and only the damaged length had to be replaced, not the whole service.

Repaired copper water pipe after crane damage, near Banksmeadow
The repaired joint, Matraville
New copper section joined into a water service, near Banksmeadow
New copper joined in

More local work is on our recent projects page.

Quick fix or long-term fix?

ProblemQuick fixLong-term fix
One break on an old mainRepair the sectionReplace the old main
Pinholes in galvanisedRepair each holeReplace the galvanised pipe
Riser hit by a forkliftReplace the riserAdd a bollard or move the riser out of the traffic path
Burst flexible hoseReplace the hoseReplace all old hoses and fit a pressure limiting valve if pressure is high
Water hammer bursting fittingsRepair the fittingFit water hammer arrestors and check pressure

What affects the cost

  • Where the pipe is: under concrete, asphalt, a building or in a wall.
  • The size and type of pipe.
  • How deep it is and whether an excavator is needed.
  • Timing: working on a weekend so water can be off.
  • Making good: concrete, asphalt, walls and ceilings.

You get a fixed price for each option before any work starts.

Who's responsible?

  • The site owner: water pipes on the property after the meter. In a lease, check who pays.
  • Whoever caused it: if a contractor or a neighbour's crane damaged your pipe, the cost may be theirs. We'll give you a report with photos.
  • Factory complexes: the shared main is usually the complex's; pipes inside a unit belong to that unit.
  • Sydney Water: the main in the street and the meter.

Quick checks you can do

  1. Know where your main stop valve is, and check it turns.
  2. Find the valves for each building or unit on a larger site.
  3. Look at flexible hoses under sinks and toilets for rust or fraying.
  4. Check hose taps and risers on docks for damage.
  5. Read the meter weekly to spot a leak early.

Signs it's urgent and when it can wait

  • Call straight away if water is pouring, near electrics, coming up through the ground, or you can't turn it off.
  • Call soon if a pipe is weeping or a hose is bulging.
  • Book a time if you want old galvanised pipe or hoses replaced before they fail.

Pipes and digging work

Many burst pipes on industrial sites start with digging: a new footing, a fence, a sign, an electrical conduit or a tree. Before anyone digs on your site, check the plans and use Before You Dig Australia to find services. Water pipes inside the property often aren't on any plan, so it's worth having them located first. If a pipe is hit, turn the water off and call us. A clean repair now is far easier than a leak that's been running into the sand for weeks.

Protecting risers and hose taps

Water risers and hose taps along building fronts and loading docks get hit by forklifts, trucks and pallets. A broken riser can lose a lot of water quickly. When we replace one, we can fit a bollard or guard, move it to a safer spot, or replace a light hose tap with a heavy-duty one that suits an industrial yard.

Burst hoses in offices and lunchrooms

The braided hoses that connect sinks, toilets, dishwashers and boiling water units are a common cause of floods in offices. They're hidden in cupboards and nobody checks them. A burst hose overnight or over a weekend can flood an office or lunchroom. If your hoses are more than a few years old, rusty or kinked, replace them. See flexi hose replacement.

Water pressure and water hammer

High mains pressure and water hammer shorten the life of every pipe and fitting on a site. A pressure limiting valve after the meter brings pressure down to a safe level, and water hammer arrestors absorb the shock when solenoid valves and quick-closing taps shut. On sites with a history of burst hoses and fittings, they're worth checking. See our water pressure guide.

Banksmeadow, area by area

  • Industrial estates off Botany Road: factory complexes with shared mains under internal roads.
  • Warehouses and logistics yards: long underground services and hose taps on loading docks.
  • Near the port and the bay: reclaimed, sandy ground and salt air on outdoor fittings.
  • The Botany side: homes and units with older services.
  • Next door in Botany, Hillsdale and Matraville: we repair burst pipes in these streets every week.

Burst pipe words explained

  • Main stop valve: the valve near the meter that turns off water to the whole property.
  • Riser: a pipe coming up out of the ground to a tap or building.
  • Repair band: a clamp that seals a small crack on a pipe.
  • Water hammer: the bang and pressure spike when water stops suddenly.
  • Pressure limiting valve: a valve that keeps pressure at a safe level.
  • Flexible hose: the braided hose connecting a tap or appliance to the pipe.

Homes in Banksmeadow

For the homes and units on the Botany side of Banksmeadow, we repair burst pipes in yards, walls and under floors, and replace old galvanised pipe that keeps failing, just as we do in Botany. See burst pipes in Botany.

After the repair

Once the water is back on and the pipe is fixed, we'll explain what caused it and whether the rest of the pipe is likely to fail. If it was damaged by someone else, we'll give you a report with photos for them or your insurer. If it's an old pipe, we'll give you options and a fixed price to replace it, so it doesn't happen again.

Finding the main stop valve on a large site

On a house, the stop valve is next to the meter at the front. On an industrial site it can be harder to find. The meter may be in a pit near the gate, in a cage beside the backflow device, or around the side of a building, and there may be separate valves for each unit, the amenities, the fire service and the yard. When a pipe bursts, nobody wants to be hunting for a valve. Next time we're on your site, ask us to show you where every valve is and label them. A simple map on the wall of the office or amenities can save a lot of water and damage.

Keeping the rest of the site running

When a main bursts, the quickest option is to turn off the water to the whole site, but that shuts down amenities, kitchenettes and sometimes processes for every business in the complex. Wherever we can, we isolate only the damaged section so the rest of the site keeps its water. If that isn't possible, we work fast to get a repair in, and if a proper repair has to wait for a quiet time, we can make a temporary repair or run a temporary line so the site can keep working until then.

Galvanised pipe that keeps failing

Older industrial buildings and homes on the Botany side can still have galvanised steel water pipe. It rusts from the inside, narrowing the pipe and thinning its walls. Signs include brown water after the tap has been off, low pressure at the far end of the building and pinhole leaks that keep appearing. Each repair fixes one weak point, but the rest of the pipe is in the same condition. Replacing galvanised with copper or modern plastic pipe, all at once or a section at a time, ends the cycle and usually improves the pressure.

Damage claims and reports

When a burst pipe floods an office, a lunchroom or stock, the insurer or the site owner will want to know what happened. We take photos of the damaged pipe before and after the repair, note the cause and the material, and give you a short written report. If a third party caused the damage, such as a contractor digging or a crane lifting nearby, the report helps you recover the cost from them. Keep the damaged section of pipe if you can; it's the best evidence of what failed.

Pipes in ceilings and walls

In offices, showrooms and the upper floors of factory units, water pipes run through ceilings and walls to amenities and kitchenettes. When one bursts, the first sign is water through a ceiling tile or down a wall, often onto desks, computers or stock. We turn the water off, find the pipe, open only what we need to, and repair it. Where a pipe keeps failing or runs in a spot that's hard to get to, we can reroute it somewhere easier to reach next time.

Before you dig on your site

  • Check your site plans for water, gas, stormwater, sewer and fire services.
  • Lodge an enquiry with Before You Dig Australia for the services in the street and on the property.
  • Remember that private pipes inside the property are often not on any plan.
  • Have the area scanned, or ask us to locate the water service, before digging.
  • Know where the main stop valve is before the digging starts.

Repairing a burst main, step by step

  1. We confirm which valve isolates the damaged section and turn it off, keeping the rest of the site live where we can.
  2. We mark out services and expose the pipe carefully by hand around the break, using an excavator for the bulk digging if it's deep.
  3. Water is pumped out of the trench so we can see the pipe clearly.
  4. The damaged length is cut out, and a new section is joined in with fittings that suit the pipe on either side.
  5. The water is turned back on slowly, the repair is checked for leaks, and the meter is read to confirm nothing else is leaking.
  6. The trench is backfilled with clean sand around the pipe, then compacted fill, ready for the concrete or asphalt to go back.

Most service pipe repairs are done in one visit. A deep main under a road can take longer, and we'll tell you the plan and the timing before we start, so you can let the other businesses on site know.

Salt air and outdoor pipes

Banksmeadow sits right on Botany Bay, and the salt in the air works on every exposed pipe, valve and fitting. Brass hose taps go green and stiff, copper turns dark and pits, and the stainless braid on flexible hoses near outside walls corrodes faster than it would inland. We check exposed fittings whenever we're on site, and when we replace them we use fittings that hold up better near the coast.

What happens when you call

1

Tell us what's going on

Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.

2

Options and a fixed price first

We find the cause, explain your options and give you a fixed price for each before any work starts.

3

Fixed, tested and backed

We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.

Why Banksmeadow businesses and homeowners call us

  • Based in Matraville, a few minutes from Banksmeadow
  • Weekend and early starts when that keeps your site running
  • Rated 5.0 from 110 Google reviews
  • Options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C), with accredited backflow testers on the team

Burst pipe questions from Banksmeadow businesses and homeowners

A pipe has burst on our site. What should we do first?

Turn off the water at the main stop valve near the meter, keep water away from electrics, move stock, and call us.

Can you come today?

We offer same-day service. Tell us if the water can't be turned off when you call.

Can you repair a burst main under concrete?

Yes. We expose the pipe, repair or replace the damaged section, and backfill properly.

A contractor hit our pipe. Who pays?

Often the contractor. We'll give you a report with photos of the damage and the repair.

Can you work on a weekend?

Yes. If the repair needs the water off across the site, we can do it on a weekend.

Our forklift hit a riser. Can you fix and protect it?

Yes. We replace the riser and can fit a guard or move it out of the traffic path.

Why do our hoses keep bursting?

Usually high pressure, water hammer or corroded braid. A pressure limiting valve and new hoses usually stop it.

Should we replace the whole main?

If it's old and has already broken, often yes. We'll give you a price for a repair and for a replacement.

Can you find a burst pipe we can't see?

Yes. We use the meter, tracer gas and acoustic listening to find it.

Will we need to dig up the yard?

Only at the spot of the break, once we've pinpointed it.

Do you still look after homes in Banksmeadow?

Yes. We repair burst pipes for the homes and units on the Botany side of Banksmeadow too.

Do you give a fixed price?

Yes, before any work starts.

More plumbing in Banksmeadow: our Banksmeadow plumber page, leak detection, stormwater and taps and toilets. Nearby: burst pipes in Botany and Hillsdale. Guides: water pressure guide, flexi hose replacement and water meter guide.

Call 0401 758 373Free quote