★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Tap repairs in Pagewood 2035

We repair and replace taps in Pagewood homes: dripping washer taps, leaking mixers and worn cartridges, stiff or spinning handles, taps that bang or squeal, laundry and washing machine taps, garden taps, and leaks under the sink. We find why it's leaking, give you options to repair or replace with a fixed price before any work starts, and back the work with our lifetime labour warranty.

Pagewood homes have just about every kind of tap. The bungalows in the north of the suburb often still have separate hot and cold washer taps in the laundry and bathroom. Post-war homes have a mix of old and new. Townhouses near Wentworth Avenue have imported mixers with cartridges specific to each brand. A dripping tap is rarely urgent, but it never fixes itself, it costs money every day, and on an old tap the longer it goes the more there is to repair. Our workshop is in Matraville, a few minutes away.

Tap problems we fix

  • Dripping from the spout after the tap is turned off.
  • Water around the handle or the base of a mixer.
  • A mixer that drips or won't hold a steady temperature.
  • Stiff, loose or spinning handles.
  • Banging or shuddering when a tap is turned off.
  • Weak flow from one tap while the others are fine.
  • Leaks under the sink at the tap connections or braided hoses.
  • Garden taps that drip, won't turn, or snap.

Why taps wear out in Pagewood homes

Washer taps in the oldest homes

The bungalows built from 1919 in the Monash Gardens estate and the streets near Astrolabe Park were fitted with traditional washer taps, and many laundries and bathrooms still have them. A rubber washer closes against a brass seat. Over decades the washer hardens and the seat wears a groove, so the tap drips however hard it's turned. A new washer on a worn seat won't last, so we re-cut the seat as part of the repair.

Mixers from the 1990s and 2000s

Kitchens and bathrooms updated in the 1990s and 2000s are full of early mixers and ceramic disc taps that are now reaching the end of their cartridges. Some of those cartridges aren't made any more, which is when replacing the mixer makes more sense.

Imported tapware in newer homes

Rebuilds, duplexes and townhouses often have imported mixers. Some are excellent; others have cartridges nobody stocks. We identify the brand and model before ordering parts so the repair is done properly the first time.

Old pipe feeding new taps

Where a kitchen or bathroom has been updated but the pipe behind it hasn't, a new mixer can be fed by old galvanised or copper pipe. Rust and scale from the old pipe travel into the mixer and damage the cartridge. If a new mixer keeps failing, the pipe is worth a look.

Water pressure

High mains pressure wears washers and cartridges faster and makes taps bang. If several taps are wearing out quickly, a pressure limiting valve at the meter is worth considering. See our water pressure guide.

Taps in different Pagewood homes

Home typeTypical tapsCommon faults
1920s and 1930s bungalowsSeparate washer taps in the laundry and bathroom, old garden tapsDrips from worn seats, stiff spindles, no isolating valves
Post-war brick homes off Page StreetA mix: original laundry taps, an updated kitchen mixerDrips, worn cartridges, laundry taps that won't shut off
Extended homesWall mixers in a newer ensuite, older taps elsewhereCartridge wear, leaks behind tiles
Rebuilds and duplexesImported mixers throughoutBrand-specific cartridges, O-rings
Townhouses near Wentworth AvenueMixers with isolating valves under eachCartridges and leaks under the sink

How we repair a tap

  1. Turn the water off at the isolating valve, or at the meter if there isn't one. We'll tell you before we do.
  2. Take the tap apart and check the washer, seat, jumper valve, O-rings or cartridge.
  3. Give you options to repair or replace, each with a fixed price.
  4. Repair or replace with quality parts, re-cutting worn seats where needed.
  5. Clean the aerator and check the flow.
  6. Test it on and off several times, hot and cold, and check for drips at the spout, handle and under the sink.

Dripping washer taps

New washers, jumpers and O-rings, and worn seats re-cut.

Mixer repairs

Cartridges replaced with the right part for your brand, or the mixer replaced.

Laundry and machine taps

Old tub taps and washing machine taps replaced with easy quarter-turn valves.

Shower and bath taps

Wall taps rewashered, converted or replaced, and leaks behind tiles found.

Garden taps

Seized and cracked outdoor taps replaced with solid brass.

Isolating valves

Valves fitted under sinks and basins so one tap can be turned off on its own.

Repair or replace?

ProblemUsually a repairUsually a replacement
Washer tap drippingNew washer and re-cut seatCracked or badly corroded body
Mixer drippingNew cartridgeCartridge no longer made
Leak at the handleNew O-rings or glandBroken handle or body
Garden tap seizedFree and service itCorroded or snapped tap
Shower tap leaking in the wallRepair the body or connectionNew mixer while the wall is open

What affects the cost

  • The tap type: washer taps are quick; mixers depend on the cartridge.
  • How many taps: doing several at once saves another call-out.
  • Access: tight cabinets and taps behind tiles take longer.
  • Isolation: if there's no isolating valve, the water has to go off at the meter.
  • Parts: some imported mixers need parts ordered.
  • A new tap: depends on the model you choose.

You get a fixed price before any work starts.

Who's responsible?

  • You (the homeowner): all taps and pipes on the house side of the meter.
  • Sydney Water: the meter and the main in the street.
  • Townhouses: taps in your home are yours; shared pipes are shared.

Quick checks you can do

  1. Spout or handle? Dry the tap and watch. Drips from the spout point to the washer or cartridge; water at the handle points to O-rings or the cartridge.
  2. Weak flow? Unscrew the aerator on the end of the spout and rinse out any grit.
  3. Isolating valves: look under the sink. If they won't turn, they're worth replacing.
  4. Under the sink: look for damp, a swollen cabinet floor or rust spots on the braided hoses.
  5. Outside: if a garden tap is stiff, don't force it. It may snap off at the wall.

See our dripping taps guide.

Signs it's urgent and when it can wait

  • Call us soon if a tap won't turn off, water is leaking into a wall or cabinet, or a tap body has cracked.
  • Book a time if a tap drips, a handle is stiff, or a garden tap drips.
  • Mention it next visit if a tap is a bit noisy or an aerator sprays sideways.

A recent tap repair nearby

Here's a recent job nearby in Maroubra, where we fixed leaking taps on the same visit as a drain clear.

Leaking tapware repaired during a drain clear, Maroubra (nearby)

The problem: a Maroubra home had slow drains and floor wastes, and the tapware was leaking too.

What we did: we laid a mat to protect the floor, jetted the drains and floor wastes clear, and then repaired the leaking taps before we packed up.

The result: the taps shut off properly and the drains run freely, all in one visit.

Floor protected during tap and drain work near Pagewood
Floor protected while we work, Maroubra
Drain jetting on the same visit as tap repairs near Pagewood
Drains cleared on the same visit

“Great plumber, fixed my leaking taps quickly and at a great price!”

Tom (Google review)

More local work is on our recent projects page.

Taps across Pagewood, area by area

  • The northern streets near Astrolabe Park: original washer taps in laundries and bathrooms, and often no isolating valves.
  • Around Page Street and the school: updated kitchens with mixers alongside original laundries.
  • The Dudley Street end: old cottages with tired garden taps next to rebuilt homes with imported mixers.
  • Near Bonnie Doon Golf Club: big gardens with several garden taps, hose reels and irrigation.
  • Towards Wentworth Avenue and Eastgardens: townhouses and newer homes with mixers throughout.

The laundry: repair or upgrade?

In many Pagewood bungalows the laundry is the least changed room in the house. The tub taps, the washing machine taps and the pipe behind them may be 60 years old or more. If the tub taps drip and the machine taps won't shut off properly, it's often worth doing the lot at once: a mixer over the tub, quarter-turn machine valves, and new hoses to the washing machine. It costs more than a washer, but it fixes several worn parts in one visit and makes the laundry easier to use.

Washing machine hoses

The hoses between the taps and the washing machine are under mains pressure whenever the taps are on, which in most homes is all the time. Rubber hoses perish and braided ones fray, and a burst machine hose can flood a laundry quickly. Replace them every few years, and turn the machine taps off when you go away. Quarter-turn machine valves make that easy.

Shower taps and the wall behind them

Shower and bath taps are the ones most likely to cause hidden damage. The tap body sits inside the wall, sealed against the tiles. If the body, the pipe joint behind it or the seal around it fails, water runs into the wall every time someone showers. In older Pagewood bathrooms that shows up as loose or drummy tiles, mould along the bottom of the wall, bubbling paint in the next room or a soft floor. New grout won't stop water coming from behind, so get it checked first. See leak detection in Pagewood.

Converting old washer taps

If your bathroom still has separate hot and cold washer taps and you like the look, you don't have to replace them. Ceramic disc conversion spindles fit into many existing tap bodies and turn them into quarter-turn taps that are easier on the hands and drip far less. It's a good option where the tap bodies are sound and replacing them would mean disturbing tiles.

Kitchen sink leaks that aren't the tap

Water in the cabinet under the kitchen sink isn't always the tap. The braided hoses feeding the mixer, the isolating valves, the dishwasher connection and the sink waste and trap can all leak. In older Pagewood kitchens the waste pipe may be old metal or early plastic that has cracked. We check everything under the sink so the cabinet stays dry.

Hot taps that run cold or too hot

If the hot tap takes ages to warm up, runs lukewarm or scalds, the tap usually isn't the problem. It may be the hot water system, a tempering valve, or a long pipe run in an extended home. We check the hot water side as well as the tap. See hot water in Pagewood.

Garden taps and hose reels

Pagewood's gardens get plenty of use, and garden taps take a beating. Taps on old galvanised risers can snap at the base when a hose is pulled hard. Taps left half on drip into garden beds for weeks. Hose reels fixed to the wall put strain on the tap and the pipe behind it. We replace worn garden taps with solid brass, fix risers firmly, and can add a vacuum breaker where needed so garden water can't be drawn back into the house pipes.

Choosing a new tap

  • Match the holes in your sink or basin.
  • Choose solid brass, especially outdoors.
  • Check the WELS rating to save water.
  • Pick a brand with spare parts available locally.
  • Consider filtered water in the kitchen. See water filters in Pagewood.

Very cheap tapware often has zinc or plastic bodies and cartridges nobody stocks. It can look fine for a year or two, then drip with no repair possible. A mid-range tap from a known brand usually costs less over its life. Send us the model before you buy if you'd like a second opinion.

A tap care checklist

  • Rinse aerators every few months.
  • Turn isolating valves off and on once a year so they don't seize.
  • Turn washing machine taps a few times a year, and off when you go away.
  • Check garden taps after summer.
  • Look under sinks for damp or swelling.
  • Don't over-tighten washer taps; it wears the washer and seat faster.

What to expect on the day

We give you a time window and let you know when we're on the way. Most tap repairs are done in one visit with parts from the van. If a mixer needs a special cartridge, we order it and come back. We protect benchtops and floors and point out any other taps that are close to needing attention, so you can decide whether to do them at the same time.

Tap words explained

  • Washer: the rubber disc that seals against the seat.
  • Jumper valve: the part the washer sits on.
  • Seat: the brass ring inside the tap the washer closes on.
  • Cartridge: the unit inside a mixer that controls flow and temperature.
  • Aerator: the screen at the end of the spout.
  • Isolating valve: a small stop tap under a sink or basin.
  • Vacuum breaker: a fitting on a garden tap that stops hose water being drawn back into the pipes.

Keeping the look in a Pagewood bungalow

A lot of Pagewood owners love the character of their 1920s or 1930s bungalow and don't want shiny modern mixers in a bathroom with original tiles. You don't have to choose between character and taps that work. Traditional-style cross-handle taps, wall-mounted bath sets and bridge-style kitchen taps are all still made, with modern ceramic disc internals that don't drip. If your original tap bodies are sound, the internals can often be replaced or converted while the outside stays the same. And where an original tap really is past saving, a period-style replacement can usually go into the same holes.

Tell us when you book that you'd like to keep the look, and we'll talk you through the options before we change anything.

Dirty or spluttering taps after work in the street

When Sydney Water works on a main, or a new service is connected nearby, your taps can splutter with air or run brown for a while afterwards. Usually it clears if you run the cold tap in the laundry or garden for a few minutes. If grit gets into the taps, it can block aerators and lodge in mixer cartridges, which then drip or lose flow. Rinsing the aerators fixes most of it. If a mixer starts dripping straight after mains work, grit in the cartridge is the likely cause, and cleaning or replacing the cartridge sorts it.

Taps in granny flats and studios

Granny flats and backyard studios in Pagewood are usually fed by a branch off the main house supply. Their taps are often fitted during the build and then forgotten. Small kitchenettes with tight cabinets hide slow leaks under the sink, and a shower mixer in a compact bathroom gets heavy use. If the granny flat has its own isolating valve on the supply, you can turn it off when it's empty. If it doesn't, it's a small job to add one.

Hot taps, children and safe temperatures

Hot water from a storage system can be hot enough to scald a young child in a second or two. In homes with young children or older family members, the hot water to bathroom taps should come through a tempering valve that limits the temperature. Many older Pagewood homes don't have one, or have one that has stopped working properly. If a bathroom hot tap runs scalding, mention it when we're there for a tap repair and we'll check it. See tempering valve installation.

Fixing a dripping washer tap, step by step

  1. Turn off the isolating valve, or the water at the meter, and open the tap to drain it.
  2. Put the plug in or a towel in the basin to catch small parts.
  3. Remove the handle and cover, easing off any scale carefully so the chrome isn't scratched.
  4. Unscrew the spindle and take out the jumper valve and washer.
  5. Check the brass seat. If it's pitted or grooved, re-cut it smooth.
  6. Fit a new washer, jumper and O-rings, or a ceramic disc spindle.
  7. Reassemble, turn the water back on, and test it on and off several times.

It sounds simple, and on a sound tap it is. The re-cut seat is the step that most quick fixes skip, and it's why some taps start dripping again a few weeks after a new washer.

Why a drip is worth fixing now

A drip runs all day and all night. Over a billing period it adds up, and a dripping hot tap wastes the energy used to heat the water as well. Drips stain basins and leave scale, and a tap left dripping usually gets worse as the washer or cartridge wears further. Fixing it early is almost always the cheapest option.

When we find more than a tap problem

Sometimes a dripping tap is the first sign of something bigger. If we see rust staining from old galvanised pipe, several taps wearing out at once, water hammer in the walls or brown water when a tap is first opened, we'll tell you. It may be the pipework or the water pressure rather than the taps, and fixing that protects every tap in the house. We'll explain what we found and give you a separate fixed price, and you decide whether to deal with it now or later.

What happens when you call

1

Tell us what's going on

Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.

2

Options and a fixed price first

We find the cause, explain your options and give you a fixed price for each before any work starts.

3

Fixed, tested and backed

We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.

Jobs we finished recently

Toilet before repair in Chifley
Toilet before repair in Chifley
Toilet after repair in Chifley
Toilet after repair in Chifley

See more recent projects

Why Pagewood homeowners call us

  • Based in Matraville, just next door to Pagewood
  • Rated 5.0 from 110 Google reviews
  • Free quotes, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C)

Tap repair questions from Pagewood homeowners

Why does my tap still drip with a new washer?

The brass seat is probably worn. We re-cut it so the new washer seals.

Can you repair my mixer?

Usually, with a new cartridge. If the cartridge isn't made any more, a new mixer can be better value.

Why is there water in the cabinet under my sink?

It could be the mixer base, a hose, an isolating valve or the waste pipe. We find which.

My shower tap leaks behind the tiles. Can you fix it?

Yes. We find the leak and repair or replace the tap body or connection with as little tile removal as possible.

Do I need to turn all the water off?

Only if there's no isolating valve. Many older Pagewood homes don't have them, so we can fit them while we're there.

Can you convert my old washer taps to quarter-turn?

Often, yes, with ceramic disc spindles that fit the existing tap bodies.

Can you replace my washing machine taps?

Yes, with quarter-turn valves, and we can fit new hoses.

Can you supply the tap?

Yes, or fit one you've bought. Send us the model first.

How long does a tap repair take?

Most take less than an hour. Wall taps and replacements take longer.

Why does my tap bang when I turn it off?

Usually water hammer from high pressure or a loose part. We fix the tap and check the pressure.

My garden tap snapped off. What now?

Turn the water off at the meter and call us. We'll replace the tap and the riser if needed.

Can you fix several taps in one visit?

Yes. Doing them together saves another call-out.

More plumbing in Pagewood: our Pagewood plumber page, taps and toilets, toilet repairs, leak detection, burst pipes and water filters. Nearby: tap repairs in Matraville and Malabar. Guides: mixer tap leaking, ceramic disc vs washer taps and dripping taps guide.

Call 0401 758 373Free quote