★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Gas fitting in Eastgardens 2036

Our licensed gasfitters look after gas in Eastgardens homes: continuous flow hot water units that won't light or run lukewarm, cooktop and oven connections, heater bayonets, courtyard and balcony BBQ points, gas leak checks and capping off old points. Every job is pressure tested and certified, and you get options and a fixed price before any work starts. We're based in Matraville, a few minutes away, and our workmanship carries a lifetime labour warranty.

Eastgardens is younger than the suburbs around it. Most of its homes went up after Westfield Eastgardens opened in 1987 on land that had been a bus depot and a car factory. That means modern gas systems, mostly copper, with continuous flow hot water on an outside wall and a gas cooktop in the kitchen. Thirty-odd years on, those systems are now at the age where the original hot water units are failing, cooktops are being replaced and owners want BBQ points in the courtyard. Here's what's involved and what to watch for.

Gas work we do in Eastgardens

Continuous flow hot water

Units that won't ignite, show error codes or run lukewarm diagnosed, repaired or replaced, with the gas supply checked.

Cooktops and ovens

Gas cooktops and ovens connected or swapped, with approved fittings and a pressure test.

Courtyard BBQ points

Fixed natural gas points for barbecues and outdoor kitchens in courtyards and on balconies.

Heater points

Bayonets added or moved for portable heaters, or points for flued wall heaters.

Gas leak checks

Pressure tests of the whole system to confirm it's sound.

Capping off

Old gas points capped and tested when appliances go electric.

Signs you need a gasfitter

  • Your continuous flow unit shows an error code, won't light, or cuts out mid-shower.
  • Hot water goes lukewarm when the cooktop is on.
  • Yellow, lazy flames on the cooktop.
  • A gas smell near an appliance, the meter or the hot water unit.
  • Soot around a heater or the hot water flue.
  • A cooktop burner that won't stay lit.
  • An old hose behind a freestanding oven that's stiff or cracked.

If you can smell gas strongly, turn it off at the meter, open doors and windows, don't use switches or flames, and leave the house. Call Jemena, who look after the gas network, from outside, then call us for anything on your side of the meter.

Why gas jobs come up in Eastgardens homes

Original continuous flow units reaching the end

Many Eastgardens houses and townhouses were built with continuous flow gas hot water mounted on an outside wall. The originals, and many of their first replacements, are now old. Common faults are failed igniters, flow sensors, fans and heat exchangers, often showing as an error code on the controller. Sometimes a repair makes sense; on an older unit, replacement is often better value. Either way, we check the gas supply so the new or repaired unit gets what it needs.

Cooktops sharing a line with hot water

Continuous flow units draw a lot of gas while they run. If the cooktop and hot water share a line that's only just big enough, using both at once leaves one of them short. Upgrading to a bigger cooktop with a wok burner can tip the balance. We check the pipe size and the regulator before connecting anything new.

Townhouses and grouped meters

Townhouse complexes in Eastgardens often have gas meters grouped together. Knowing which meter is yours matters, both for turning gas off and for any work on your line. Gas work inside your home is yours to arrange; a shared supply or common meter bank is usually the owners' together.

Courtyards and outdoor living

Eastgardens homes often have a courtyard or small backyard rather than a big garden, and owners want to make the most of it with a built-in barbecue or outdoor kitchen. A fixed point needs the right clearances from windows, doors and boundary walls, which in a small courtyard takes careful placement.

Older homes at the edges

Parts of Eastgardens were once part of Pagewood and Hillsdale, and some streets on the edges still have older homes with older gas lines. Those need the same care as any older system: test the whole line before adding anything.

Eastgardens homes and their gas

Home typeWhat we usually findWhat to think about
Houses built from the late 1980sCopper lines, continuous flow on an outside wall, gas cooktopHot water unit age, supply size for a new cooktop
TownhousesGrouped meters, compact kitchens, units on walls near neighboursWhich meter is yours, flue clearances
Courtyard homesSmall outdoor spaces, wanted BBQ pointsClearances and pipe routes in tight spaces
ApartmentsBalcony-mounted hot water, gas cooktopsShared supplies, building rules
Older homes on the edgesOlder lines and capped branchesTest the whole line first

How a gas job runs

  1. Tell us what you need. For hot water, the brand, model and any error code help. A photo of the unit's data plate is ideal.
  2. Check the system: meter, regulator, pipe size and condition, with a pressure test.
  3. Options and fixed prices: repair, replace, or upgrade the supply.
  4. Do the work with approved pipe and fittings and isolation valves.
  5. Test and commission: pressure test, every joint checked, appliances lit and set.
  6. Certificate of Compliance for the gas work.

Continuous flow hot water: repair or replace?

SituationRepairReplace
Error code on a unit under 8 years oldOften worth diagnosing and repairingIf a major part like the heat exchanger has failed
Igniter or flow sensor faultUsually a repairIf parts aren't available
Leaking heat exchangerRarely worth itUsually
Unit 12 or more years old with repeated faultsShort-term onlyUsually better value
Lukewarm when the cooktop is onCheck and upgrade the gas supplyNot needed if the unit is sound

See hot water in Eastgardens and our gas hot water page.

Cooktops and ovens

A good cooktop installation needs the right clearances to the rangehood and side walls, a connection that won't be strained when the bench is leaned on, and enough gas for every burner at once. Many Eastgardens kitchens are original to the house, so a new cooktop is often the first change in decades. For a freestanding oven, we fit a new approved hose and a restraint so it can't be pulled out far enough to strain the connection. See gas cooktop installation.

BBQ points in courtyards

  • Placement: clear of windows, doors, eaves and anything that could catch.
  • Protection: pipe clipped and protected from knocks in a busy outdoor space.
  • Isolation: a valve at the point so the barbecue can be turned off on its own.
  • Conversion: a barbecue made for bottled gas must be converted for natural gas.
  • Testing: the line pressure tested and the barbecue lit and checked.

Heaters

Eastgardens homes are usually better insulated than older housing nearby, but a gas heater is still a common winter choice. A bayonet lets you plug in a portable heater where you need it. For a flued wall heater, the flue has to go through an outside wall with clearances to windows and the boundary, which on a townhouse can limit where it goes. Have heaters serviced before winter and keep room vents clear. See gas bayonet installation.

What affects the cost

  • The appliance: a swap, a new connection, or a replacement hot water unit.
  • Distance from the meter or existing line.
  • Access: slab construction often means running pipe externally or through ceilings.
  • Pipe size and regulator upgrades.
  • Making good around penetrations.

You get a fixed price for each option before any work starts.

Who's responsible for what

  • Jemena: the gas main, the service to your meter, and the meter.
  • You: pipework and appliances on the house side of the meter.
  • Your retailer: your account and bills.
  • Townhouse and apartment owners together: shared supplies, meter banks and common flues.

Safety checks you can do

  1. Find your gas meter and the valve that turns it off. In townhouse complexes, make sure you know which one is yours.
  2. Look at your cooktop flames: blue with a small steady tip.
  3. Check around the hot water unit and any heater for soot or scorching.
  4. Keep the area around the hot water unit and meter clear of plants, bins and stored gear.
  5. If a gas smell comes and goes, note where and when and call us.

Signs it's urgent and when it can wait

  • Act straight away if the gas smell is strong: turn off at the meter, get out, call Jemena, then us.
  • Call soon if there's a faint smell, yellow flames, soot, or no hot water.
  • Book a time if you're planning a new cooktop, heater point, BBQ point or hot water change.

A recent gas hot water job nearby

Here's a recent job nearby in Maroubra, where an old gas tank was replaced with continuous flow.

Gas storage tank replaced with continuous flow, Maroubra (nearby)

The problem: an old gas storage tank beside a Maroubra home had stopped producing hot water.

What we did: we explained repairing against replacing, and the systems that would suit. The owners chose a Rinnai continuous flow unit. We removed the tank, mounted the new unit on the wall, upsized the copper pipework, and replaced the gas regulator at the meter so the unit gets enough gas.

The result: steady hot water throughout the house, on a gas supply sized for the new unit.

Old gas hot water tank before replacement near Eastgardens
The old tank, Maroubra
New continuous flow gas unit installed near Eastgardens
The new continuous flow unit

More local work is on our recent projects page.

“Great plumber, fixed my leaking taps quickly and at a great price!”

Tom (Google review)

Gas across Eastgardens, area by area

  • Around Westfield and Wentworth Avenue: apartments and townhouses with balcony hot water and grouped meters.
  • Near Bunnerong Road: houses and townhouses from the late 1980s and 1990s with original gas systems.
  • Around Mutch Park: family houses with courtyards and backyards suited to BBQ points.
  • The Pagewood and Hillsdale edges: some older homes with older gas lines.
  • Newer infill: recent homes with modern systems and continuous flow throughout.

Error codes on continuous flow units

Most continuous flow units show a number on the controller when something goes wrong. The code points to the type of fault: ignition, flame failure, overheating, a fan problem or a sensor. Write the code down and tell us when you call, along with the brand and model. Sometimes the cause is simple, like a gas supply problem when another appliance is running, or a power interruption. Sometimes it's a worn part. Resetting a unit repeatedly without fixing the cause isn't a good idea, especially with flame or overheat codes.

Going all-electric?

Some Eastgardens owners are moving to heat pump hot water, induction cooking and reverse-cycle heating. If that's your plan, we can tell you which gas appliances can stay for now and cap the rest safely. When the last appliance comes off, the line is capped and tested, and you'll need to talk to your retailer and Jemena about the meter. We'll explain the options without pushing either way.

Questions to ask any gasfitter

  • Are you licensed for gasfitting? Our licence is 398171C.
  • Will you pressure test the whole system?
  • Will I get a Certificate of Compliance?
  • Is the price fixed?
  • What warranty comes with the work? Ours is a lifetime labour warranty.

Looking after gas appliances

  • Keep the area around the hot water unit clear so it can breathe.
  • Have gas heaters serviced every year or two.
  • Keep cooktop burners clean.
  • Check the hose behind a freestanding oven when you clean.
  • Fit a carbon monoxide alarm if you use a gas heater indoors.

Gas words explained

  • Continuous flow: a hot water unit that heats water as it's used.
  • Regulator: the device at the meter that sets the gas pressure.
  • Bayonet: a socket for a portable gas heater.
  • Pressure test: a test that shows whether the system holds pressure.
  • Flue: the outlet for combustion gases.
  • Certificate of Compliance: the paperwork recording the gas work.

Running gas in slab homes

Most Eastgardens homes are built on concrete slabs, not timber floors, so there's no crawl space to run a new gas line through. A new point for a cooktop that has moved, a BBQ in the courtyard or an upgraded supply to the hot water usually means running pipe along an outside wall, through the ceiling space, or occasionally in a chase cut into a wall. Outside runs are clipped neatly and protected, and painted to match if you'd like. We plan the route with you before starting so the pipe ends up where it's safe, compliant and as unobtrusive as possible.

Replacing a continuous flow unit, step by step

  1. We check the old unit's model, the gas pipe size, the regulator and the flue clearances around it.
  2. We confirm the new unit's gas and flow requirements and whether the supply can meet them.
  3. The gas and water are isolated and the old unit is removed.
  4. The new unit is mounted, with the water, gas and power connected. If needed, the gas pipe and regulator are upgraded at the same time.
  5. We purge the air from the gas line, pressure test, and fire the unit up.
  6. We set the temperature, test the hot water at every tap, check the controllers in the kitchen and bathroom, and show you how to use them.
  7. You get a Certificate of Compliance for the gas work.

Hot water units and flue clearances

A continuous flow unit's flue outlet has to be a set distance from windows, doors, other openings, the ground and boundaries. On older Eastgardens townhouses the original unit was often fitted where it met the rules of the day, and a new unit may need a little more clearance, or a different spot on the same wall. A balcony unit in an apartment also has to suit the building's rules. We check this before quoting, so there are no surprises on the day.

Temperature controllers

Many continuous flow systems have controllers in the kitchen and bathroom to set the water temperature. If they stop working, the unit may default to a set temperature or show a communication error. Sometimes it's the controller, sometimes the wiring, sometimes the unit. When we service or replace a unit, we check the controllers too and set the temperature to a safe level for bathrooms.

Buying or selling in Eastgardens

A 30-year-old Eastgardens home may still have its original gas cooktop and a second or third continuous flow unit. Before you buy, it's worth knowing the age of the hot water unit and whether the gas system has been pressure tested. If you're selling, having any gas faults fixed and Certificates of Compliance on file for recent work gives buyers confidence.

Gas or heat pump for your next hot water system?

Gas continuous flowHeat pump
How it heatsBurns gas as water flowsUses electricity to pull heat from the air into a tank
Space neededA small unit on the wallA tank and a compressor, usually outside
Hot water supplyEndless while gas flowsStored; sized to the household
Running costsDepends on gas prices and useDepends on power prices; can pair with solar
Gas lineNeeds a supply sized for the unitGas to the hot water can be capped off

We install both and will talk you through what suits your home. In a small Eastgardens townhouse, wall space and noise near a neighbour's window can decide it as much as running costs.

When the gas cooktop won't light

If one burner won't light but the others do, the igniter or the burner itself is usually dirty or worn. If none will light and the hot water still works, the cooktop's isolation valve may be off or the cooktop's ignition has failed. If nothing gas works at all, check the meter valve is on and whether the gas supply has been interrupted in the street. Don't keep clicking a burner that won't light. Turn it off, let any gas clear, and call us if it doesn't come good.

Moving a gas appliance

Owners sometimes want the cooktop on a new island bench, the barbecue on the other side of the courtyard, or the hot water unit off a wall next to a bedroom. Each move means a new gas run sized for the appliance, and for hot water, new water and power connections and a flue position that meets the rules. We'll tell you what's practical before you commit to a layout.

Servicing a continuous flow unit

Continuous flow units don't need much, but they do better with a check every couple of years. A service looks at the burner, the fan and the flue for dirt and insects, cleans the water inlet filter, checks the gas pressure at the unit, and tests the safety cut-outs. In Eastgardens, where many units sit on outside walls behind shrubs or bins, simply clearing space around the unit so it can draw air and vent properly prevents a lot of faults. If your unit has started making new noises, taking longer to give hot water, or showing occasional error codes, a service is a good first step before deciding whether to replace it.

What happens when you call

1

Tell us what's going on

Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.

2

Options and a fixed price first

We find the cause, explain your options and give you a fixed price for each before any work starts.

3

Fixed, tested and backed

We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.

Jobs we finished recently

Our van on a job in Little Bay
Our van on a job in Little Bay

See more recent projects

Why Eastgardens homeowners call us

  • Based in Matraville, a few minutes from Eastgardens
  • Rated 5.0 from 110 Google reviews
  • Free quotes, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C)

Gas fitting questions from Eastgardens homeowners

My continuous flow unit shows an error code. Can you fix it?

Often, yes. Tell us the code, brand and model. We diagnose it and tell you whether repair or replacement makes more sense.

Why does my hot water go cold when the cooktop is on?

The gas line or regulator is probably too small for both. We can check and upgrade it.

Do I need a licensed gasfitter for a cooktop?

Yes. In NSW gas work must be done by a licensed gasfitter and certified.

Can you add a BBQ point in my courtyard?

Usually, yes. We'll find a spot with the right clearances.

Which gas meter is mine in our townhouse complex?

We can help you identify it. It's worth labelling clearly.

Can you move my hot water unit?

Often, yes, though flue clearances and pipe routes need checking first.

Who fixes a leak at the gas meter?

Jemena. The meter and street side are theirs.

Can I connect a bottled-gas BBQ to natural gas?

Only after it's converted. We can fit the point and connect a natural gas barbecue.

Do you do gas work in apartments?

Yes, inside your own home. Shared supplies are the owners' together.

Can you cap off gas if I go electric?

Yes. We cap and test the line so the system is left safe.

How long does a continuous flow replacement take?

Usually a few hours, longer if the gas supply needs upgrading.

What's a Certificate of Compliance?

The paperwork confirming the gas work meets the standards. You get one for our gas work.

More plumbing in Eastgardens: our Eastgardens plumber page, hot water, blocked drains, taps and toilets and water filters. Nearby: gas fitting in Pagewood and Botany. Guides: gas fitting, gas compliance certificates and gas point installation.

Call 0401 758 373Free quote