Toilet repairs in Maroubra 2035
A toilet that runs all night, leaks onto the floor or won't flush properly is more than an annoyance. A running cistern can waste thousands of litres of water, and a slow leak at the base can rot the floor underneath. We're based next door in Matraville and fix toilets for homeowners across Maroubra, from the beach streets and North Maroubra to Maroubra Junction, Coral Sea Park and South Maroubra.
Common toilet problems in Maroubra homes
Most toilet problems fall into a handful of groups. Here's what we're usually called out for, and what's normally behind it.
Toilet keeps running or refilling
If you can hear the cistern trickling or refilling on its own, water is getting past the outlet seal (the flush valve washer) into the pan, or the inlet valve isn't shutting off at the right level. Worn rubber seals and tired inlet valves are the usual culprits, especially in cisterns that are 15 or more years old. Our running toilets guide explains how to tell which one it is.
Water on the floor around the toilet
Water at the base of the toilet can come from the cistern, the water connection, the seal between the pan and the floor waste, or condensation on a cold cistern in humid weather. The cause matters: a failed pan seal can let waste water leak under the floor tiles. See our toilet leaking at the base page.
Weak or incomplete flush
If you need to hold the button down or flush twice, the cistern may not be filling to the right level, the flush valve may be worn, or the rim of the pan may be partly blocked with scale. In older homes, the drain from the toilet may also be partly blocked or sagging, so the pan empties slowly.
Blocked toilet
A toilet that blocks once after too much paper is easy to clear. One that blocks again and again usually has a problem further down the pipe: roots in an old clay sewer, a sag in the line, or something lodged in the bend. If the water rises when you flush, see toilet water rising and blocked toilet.
Broken buttons, handles and seats
Push buttons that stick, levers that snap and loose seats are quick fixes in most cases, as long as we can get the right parts for your cistern. Our toilet seat guide helps you pick a seat that fits.
Loose or cracked pan
A pan that rocks when you sit on it will eventually break its seal and leak. A cracked pan or cistern has to be replaced, because a crack only gets worse and can fail suddenly.
Toilets in different kinds of Maroubra homes
Maroubra's mix of housing means we see just about every type of toilet, and the age of the home tells us a lot before we open the cistern.
Interwar bungalows and semis
Some older homes around Maroubra Junction and the streets off Maroubra Road still have high-level or old-style cisterns, separate toilet rooms with timber floors, and original clay pipes underneath. Parts for very old cisterns can be hard to find, so we'll tell you honestly whether a repair will last or whether a new suite makes more sense. Timber floors under a leaking toilet are worth checking for soft spots.
Homes with an outside toilet
Plenty of older Maroubra homes still have a toilet in the outside laundry or a separate room at the back. These often have old cisterns, exposed pipes and a long run to the sewer. See our toilet in the outside laundry page.
Post-war brick and fibro homes
In South Maroubra and Coral Sea Park, many bathrooms were updated in the 1980s and 1990s with close-coupled suites. These cisterns are usually easy to repair, but the rubber parts are at the end of their life, so we often replace the inlet valve and flush valve together to save a second visit.
Units and townhouses
Newer homes and updated units often have in-wall (concealed) cisterns with a button plate on the wall. These are repaired through the button opening, and we carry common parts for the main brands. If you live in a unit, a toilet inside your own unit is something we can fix for you directly.
Homes near the beach
In the streets near Maroubra Beach, salt air corrodes the chrome on flush buttons and the metal parts of exposed pipes and stop taps faster than inland. Stiff, corroded stop taps are common, which is a problem when you need to turn the water off in a hurry. We can replace them while we're there.
Toilets across Maroubra, area by area
- Maroubra Junction and the older streets: interwar semis and bungalows, some with high-level cisterns, outside toilets and timber floors that need checking after a leak.
- Coral Sea Park and South Maroubra: post-war homes with 1980s and 1990s close-coupled suites whose rubber seals and inlet valves are now worn out.
- North Maroubra and the beach streets: salt air corrodes chrome buttons and exposed stop taps, so seized stop taps are common.
- Units and townhouses: in-wall cisterns and wall-hung pans, repaired through the button plate.
Toilet repair step by step: a running cistern
- Turn off the stop tap behind the toilet and flush to empty the cistern.
- Check the water level and the overflow. If water is running into the overflow pipe, the inlet valve is the problem. If not, it's the outlet seal.
- Replace the faulty part with a quality inlet valve or outlet seal to suit your cistern brand.
- Set the water level so the cistern holds the right amount for a full flush without running into the overflow.
- Refill and test several full and half flushes, and check the hose and stop tap for leaks.
Signs a toilet problem is urgent and when it can wait
- Call us soon if water leaks from the base when you flush, the toilet overflows, the pan or cistern is cracked, or water won't stop running into the pan and you can't turn the stop tap off.
- Book a time if the cistern refills now and then, the flush is weak, or the button sticks.
- If it's your only toilet and it's out of action, tell us when you call so we can plan the visit around that.
- Keep an eye on it if you notice a faint trickle only now and then. Do the food colouring test below and let us know what you find; it helps us bring the right parts.
Toilet words explained
- Cistern: the tank that holds the flush water.
- Inlet valve: the valve that refills the cistern and shuts off at the right level.
- Outlet valve or flush valve: the valve that releases water into the pan when you flush, sealed by a rubber washer.
- Pan connector: the rubber or plastic fitting that seals the pan to the waste pipe.
- Set-out: the distance from the wall to the centre of the waste pipe.
- Stop tap: the small tap on the wall behind the toilet that turns off its water supply.
How we fix toilets in Maroubra
- Find the cause. We check the cistern, inlet and outlet valves, the water connection, the pan seal and, if needed, the drain below, so we fix the right thing.
- Give you options. Repair the parts that have failed, or replace the cistern or the whole suite. We explain the difference and give you a fixed price for each before any work starts.
- Fix it properly. Quality replacement parts, a new flexible hose or stop tap if the old one is worn, and the pan re-sealed and secured if it was loose.
- Test it. We flush and refill several times, check for leaks and make sure the cistern shuts off at the right level.
- Leave it clean. We clean up and take the old parts away.
Running cisterns
Inlet valves, outlet seals and flush valves replaced so the toilet stops running and refills quietly.
Leaks at the base
Pan connectors and seals replaced and the pan re-secured, so waste water stays in the pipe.
Concealed cisterns
In-wall cisterns repaired through the button plate, with parts for the common brands.
Blocked toilets
Cleared by hand or with drain equipment, and the drain checked with a camera if it keeps happening.
New toilet suites
Old or cracked toilets replaced with a new suite that suits your bathroom and the existing waste.
Stop taps and hoses
Seized or leaking stop taps and old flexible hoses replaced so you can always turn the water off.
Repair or replace your toilet?
Most toilets can be repaired. Sometimes a new one is the better buy. This is how we explain it:
| Problem | Usually a repair | Usually a replacement |
|---|---|---|
| Running or refilling cistern | New inlet valve and outlet seal | Cistern is very old and parts aren't available |
| Leak at the base | New pan connector and seal | Pan is cracked or the floor waste is damaged |
| Weak flush | Adjust the water level, new flush valve | Old single-flush toilet that uses a lot of water |
| Wobbly pan | Re-secure and re-seal the pan | Pan base or floor fixings are broken |
| Cracked cistern or pan | Not repairable | New cistern or a new suite |
Choosing a new toilet for a Maroubra bathroom
If your toilet is past repairing, the new one has to fit the plumbing that's already there. These are the things we check before you buy, so you don't end up with a toilet that won't fit:
- The set-out. This is the distance from the wall to the centre of the waste pipe in the floor (or the wall). Older Maroubra bathrooms often have set-outs that suit only some models. We measure it for you.
- S-trap or P-trap. An S-trap goes into the floor and a P-trap goes into the wall. Many older homes with timber floors have floor wastes, while some units have wall wastes.
- Style. Close-coupled suites (cistern sitting on the pan) are the most common and easiest to service. Back-to-wall suites hide the pipes and are easier to clean around. Wall-hung toilets with concealed cisterns look neat but need the wall opened up to fit.
- Water rating. Look for a good WELS star rating. A modern dual-flush toilet uses much less water than an old single-flush one.
- Height and comfort. Taller pans are easier for many people to use, and soft-close seats are worth having.
Tell us what you like the look of and we'll check it suits your bathroom before you buy. See also toilet replacement.
When a toilet problem is really a drain problem
Sometimes the toilet isn't the problem at all. These signs point to the drain under the house or in the yard:
- The toilet gurgles when you run a bath or the washing machine empties. See gurgling drains.
- The toilet, shower and basin are all slow at the same time.
- Water rises in the shower or floor waste when you flush.
- The overflow gully outside (the grated pipe near the laundry or bathroom) overflows.
- There's a sewage smell outside near the inspection opening.
In Maroubra, the usual cause is an old clay sewer pipe with roots or a sag in the sand. A drain camera shows exactly where it is. See sewer repairs in Maroubra.
Looking after your toilet
- Only flush toilet paper. Wet wipes, even the ones labelled flushable, don't break down and are a major cause of blockages. So are paper towel, cotton buds and sanitary products.
- Don't use drop-in cistern tablets. Some break down the rubber seals in the cistern and cause it to leak sooner.
- Know where the stop tap is and turn it now and then so it doesn't seize.
- Fix small leaks quickly. A slow drip at the base or behind the pan can damage the floor long before it looks bad.
What affects the cost of a toilet repair
- The type of cistern. Close-coupled and wall-hung exposed cisterns are quickest. Concealed in-wall cisterns and very old models take longer.
- Parts. Common parts are on the van. Some brands and older models need parts ordered in.
- What else has failed. A worn stop tap or hose is worth replacing at the same time.
- The drain. If a blockage or leak is in the pipe below the floor, the job becomes a drain repair. See blocked drains in Maroubra.
- Replacing the suite. A new toilet depends on the model you choose and whether it fits the existing waste and water connection.
You get a fixed price before any work starts.
Who's responsible?
- You (the homeowner) are responsible for the toilet, cistern, water connection and the waste pipe on your property.
- Sydney Water is responsible for the sewer main. If several homes in the street have sewage problems at the same time, or there's an overflow from a manhole in the street, call Sydney Water.
- In units, the toilet inside your unit is usually yours. Shared pipes in the building are usually the building's responsibility.
Our sewer responsibility guide has more detail.
Quick checks you can do
- Is it running? Put a few drops of food colouring in the cistern and don't flush for 20 minutes. If colour shows in the pan, water is leaking past the outlet seal.
- Is it the inlet? Lift the cistern lid and check the water level. If it's at or above the overflow pipe, the inlet valve isn't shutting off.
- Where's the water on the floor coming from? Dry everything with a towel, then put dry paper towel around the base, the hose and the cistern. The wet spot shows where the leak starts.
- Can you turn it off? Turn the stop tap behind the toilet clockwise. If it won't turn or it leaks when you do, it needs replacing.
If water is coming from the base of the pan when you flush, stop using that toilet until it's fixed.
What our customers say
“I called [the team at] Scalici Plumbing Group to clear my blocked drain and fix my leaking toilet in Maroubra. Great company to deal with, highly recommended.”
Chris L., Maroubra (Google review)
Our recent toilet repairs near Maroubra
Leaking back toilet repaired, Chifley
The problem: a toilet at a home in Chifley, just south of Maroubra, was leaking at the back.
What we did: we tracked down where the water was getting out and repaired the leak at the back of the toilet.
The result: the toilet works without leaking and the floor stays dry.


More local jobs are on our recent projects page.
Saving water with your toilet
A running toilet is one of the biggest hidden water wasters in a home. Even a slow trickle into the pan adds up over a quarter and shows on the water bill. Fixing it quickly saves water and money. If you have an old single-flush toilet, a new dual-flush suite uses far less water per flush. If you have a rainwater tank, toilets can often be connected to it. See toilets on rainwater.
What to expect on the day
We give you a time window and let you know when we're on the way. Most toilet repairs are done in one visit with the parts we carry on the van. If your cistern needs a special part, we'll tell you on the day, order it in and come back to fit it, and make sure the toilet is usable in the meantime where possible. We protect the bathroom floor while we work and clean up before we leave.
What happens when you call
Tell us what's going on
Call or send a quick form. A photo of the problem helps us come prepared. No call-out fee.
Options and a fixed price first
We find the cause, explain your options and give you a fixed price for each before any work starts.
Fixed, tested and backed
We do the work, test it, clean up, and back our workmanship with a lifetime labour warranty.
Why Maroubra homeowners call us
- Based in Matraville, a few minutes from every street in Maroubra
- Rated 5.0 from 110 Google reviews
- Free quotes, with options and a fixed price before any work starts
- Lifetime labour warranty on our workmanship
- Licensed plumbers, drainers and gasfitters (Lic. 398171C)
Toilet repair questions from Maroubra homeowners
Why does my toilet keep running?
Usually because the outlet seal is letting water into the pan, or the inlet valve isn't shutting off. Both are common in cisterns more than 15 years old, and both can be repaired.
Is it worth repairing an old toilet?
Often yes, if parts are available and the pan and cistern aren't cracked. If the toilet is very old, single-flush or needs several parts, a new suite can make more sense. We'll give you a price for both.
Why is there water around the base of my toilet?
It can be the pan seal, the water connection, the cistern or condensation. If it happens when you flush, the pan seal is the likely cause, and it should be fixed quickly to protect the floor.
Can you fix an in-wall cistern?
Yes. Most concealed cisterns are repaired through the button plate opening. We carry parts for the common brands and can order others.
My toilet keeps blocking. Is it the toilet or the drain?
If it blocks often, especially with normal use, the problem is usually in the drain: roots, a sag or a partial blockage. We can check it with a drain camera.
How long does a toilet repair take?
Most repairs take about an hour. Replacing a toilet suite usually takes a few hours.
Do you replace toilet stop taps?
Yes. A stop tap that's seized or leaking is worth replacing so you can turn the water off when you need to.
Can a toilet run on rainwater?
Yes, if you have a rainwater tank with a pump and mains backup. It's a good way to save mains water, and we can check whether your tank and toilet can be connected.
Why does my toilet make a noise when it refills?
A whistling, humming or banging noise while the cistern fills usually comes from a worn inlet valve or high water pressure. A new inlet valve usually fixes it, and a pressure limiting valve helps if the pressure is high.
Do you remove the old toilet?
Yes. When we replace a toilet or cistern, we take the old one away and clean up.
More plumbing in Maroubra: our Maroubra plumber page, taps and toilets, tap repair, blocked drains, sewer repairs and burst pipes. Nearby: toilets in Matraville and toilets in Malabar. Related: leaking toilet, toilet replacement and macerator toilets.