Water filters in Banksmeadow 2019
Sydney's tap water is treated and safe to drink, but many people don't like the taste of chlorine, and on older industrial sites the water reaching the lunchroom can pick up grit, sand and rust from old pipes along the way. Grit also shortens the life of taps, toilet valves, boiling water units and coffee machines. A good filter in the right place gives staff better-tasting water and protects the fixtures and equipment that use it. We're based a few minutes away in Matraville.
Water filters we install in Banksmeadow
Lunchroom filter taps
A separate filter tap at the lunchroom sink, with the filter housed in the cupboard below.
Under-sink filters
Filters on the cold supply to an existing mixer or a dedicated tap.
Boiling and chilled water unit filters
The filters that feed wall-mounted boiling and chilled water units, fitted and changed.
Sediment filters
Filters that catch sand, grit and rust before they reach taps, valves and equipment.
Equipment filters
Filters for coffee machines, ice makers and other equipment in staff kitchens.
Whole-house filters
For the homes near Botany, filtering all the water coming into the house.
Signs a filter would help
- Staff buy bottled water because they don't like the taste of the tap water.
- A chlorine taste or smell in drinking water.
- Brown or cloudy water after the tap has been off overnight or over a weekend.
- Grit or sand in tap aerators and toilet valves.
- Taps and cistern valves that fail sooner than they should.
- A boiling water unit or coffee machine that needs frequent servicing.
- Scale building up in kettles and appliances.
Why water quality varies on Banksmeadow sites
Long, old water services
Water reaching a lunchroom at the back of a large site may travel a long way from the meter through pipes that are decades old. Galvanised and cast iron pipe rusts inside, and the rust and scale come out as brown water and grit, especially after the water has sat still overnight or over a weekend.
Mains work and pipe repairs
Work on the water mains in the street, or a repair on the site's own service, stirs up sediment. For a while afterwards, sand and grit come through the taps and lodge in valves and aerators.
Chlorine for safety
Sydney Water adds chlorine to keep the water safe as it travels through the pipes. It does its job, but some people find the taste strong. A carbon filter removes most of the chlorine taste and smell.
Choosing the right filter
| Filter type | Good for | Things to know |
|---|---|---|
| Carbon under-sink filter | Better-tasting drinking water at one sink | Cartridges changed every 6 to 12 months depending on use |
| Filter tap | Filtered water from its own tap, separate from the mixer | Needs a hole in the bench or sink |
| Sediment filter | Catching sand, grit and rust | Often fitted before a carbon filter or on the incoming supply |
| Boiling water unit filter | Protecting the unit from scale and sediment | Changed as the maker recommends |
| Whole-house filter | Filtering all the water into a home | Larger housing near the meter, cartridges changed regularly |
How we install a filter
- Talk about what you want: better taste, protection for equipment, or both.
- Look at the site: the sink, the cupboard, the water pressure and where the filter can be reached for changes.
- Recommend a filter and give you a fixed price.
- Install it, with isolation valves so cartridges can be changed easily.
- Flush and test the filter and check for leaks.
- Show you how and when to change the cartridges, or put it on our service list.
A recent filter job nearby
Here's a recent filter installation at a unit in Matraville, just up the road from Banksmeadow.
Filter tap and kitchen mixer fitted in one visit, Matraville (nearby)
The problem: the owners of a unit on Daunt Avenue in Matraville wanted filtered drinking water at the kitchen sink, a new kitchen mixer they had chosen, and new hoses on the bathroom basin mixers.
What we did: we replaced the kitchen mixer and the mini stop taps under the sink, drilled a new hole through the stone benchtop for the filter tap, fitted the tap and mounted the filters under the sink with the inlet and outlet connected. We also fitted new flexible hoses on the basin mixers.
The result: filtered water from its own tap, a new kitchen mixer and new basin hoses, all done with the water off only once.
More local work is on our recent projects page.
Quick fix or long-term fix?
| Problem | Quick fix | Long-term fix |
|---|---|---|
| Chlorine taste | Carbon filter at the lunchroom sink | Filter tap so drinking water has its own outlet |
| Grit in taps and valves | Clean aerators and valves | Sediment filter on the incoming supply |
| Brown water after weekends | Run the taps | Replace old galvanised pipe, add a sediment filter |
| Boiling water unit scaling | Service the unit | Fit and maintain the right filter |
What affects the cost
- The type of filter and how many.
- Whether a new tap or a hole in the bench is needed.
- Access in the cupboard or near the meter.
- Ongoing cartridge changes.
- Timing: outside your business hours.
You get a fixed price before any work starts.
Who's responsible?
- The site owner or tenant: filters and fittings inside the property. Check your lease if the filter is part of the building.
- Sydney Water: the quality of the water supplied to the meter.
Quick checks you can do
- Unscrew a tap aerator and look for grit.
- Run a tap first thing Monday and see if the water is brown at first.
- Check when your boiling water unit's filter was last changed.
- Look for a date sticker on any existing filter cartridge.
Filters and maintenance
A filter that's never changed stops working, and a very old cartridge can restrict flow or even let bacteria grow. Every filter needs its cartridge changed on a schedule that suits how much water goes through it. For a busy lunchroom, that may be every six months. We'll put a date sticker on the housing and can add the site to our service list so it's done on time.
Protecting boiling water units and equipment
Wall-mounted boiling water units, coffee machines and ice makers all suffer from scale and sediment. A filter on their supply extends their life and keeps them working well. Many boiling water units have their own filter that must be changed regularly; we fit and change them as part of servicing the unit. See hot water in Banksmeadow.
Banksmeadow, area by area
- Industrial estates off Botany Road: factory units with a kitchenette sink and a boiling water unit.
- Warehouses and logistics yards: lunchrooms serving whole shifts.
- Offices and showrooms: kitchens with filter taps and coffee machines.
- The Botany side: homes and units with under-sink and whole-house filters.
- Next door in Botany, Hillsdale and Matraville: we install filters here every week.
Filter words explained
- Carbon filter: removes chlorine taste and smell and some other chemicals.
- Sediment filter: catches sand, grit and rust.
- Cartridge: the replaceable part inside the filter housing.
- Filter tap: a separate tap that only delivers filtered water.
- Micron rating: how fine the filter is; lower numbers catch smaller particles.
Homes in Banksmeadow
For the homes and units on the Botany side of Banksmeadow, we install under-sink filters, filter taps and whole-house filters, and service them, just as we do in Botany. See water filters in Botany.
Why staff drinking water matters
On an industrial site, staff working in warehouses, yards and workshops through a Sydney summer need to drink a lot of water. If the tap water in the lunchroom tastes of chlorine or comes out cloudy after a weekend, people buy bottled water, bring their own, or simply drink less than they should. A filter tap at the lunchroom sink, or a chilled filtered water unit, makes good drinking water easy to get. It also cuts the plastic bottles going into the site's bins.
Installing a filter tap, step by step
- We pick a spot for the filter tap on the sink or bench where it's easy to reach but out of the way of the main mixer.
- The water is turned off at the isolation valves under the sink, or at the meter if there aren't any. If the valves are missing or seized, we fit new ones.
- A hole is drilled through the sink or benchtop. Stone and composite benches need a diamond core bit and a careful hand.
- The filter housing is mounted in the cupboard where cartridges can be changed easily, connected to the cold water supply with its own isolation valve.
- The filter tap goes in and is connected to the filter outlet.
- We flush the new cartridge to clear any carbon fines, check every connection for leaks, and put a date sticker on the housing.
Sediment filters on the incoming supply
If grit is the problem rather than taste, the best place for a filter is often near where the water enters the building, so it protects every tap, toilet valve and appliance downstream. A sediment filter on the incoming supply catches sand, rust and scale before it can reach the fixtures. It needs a housing big enough for the flow the building uses, and isolation valves and a bypass so the cartridge can be changed without cutting off water to the site. We size the filter to the building and fit it where it can be reached easily.
Brown water and old pipes
Filters treat the symptom. If water comes out brown every Monday morning, the pipes it's sitting in are rusting from the inside, and they'll eventually leak or burst. A filter makes the water better in the meantime, but replacing old galvanised or cast iron pipe is the long-term fix. We'll tell you which is behind your discoloured water and give you options for both. See burst pipes in Banksmeadow.
Chilled and boiling water units with filters
Many offices and larger lunchrooms have a combined boiling and chilled filtered water unit above the sink, giving staff boiling water for tea and coffee and cold filtered water for drinking from one tap. These units have their own filters, which must be changed on schedule or the unit's performance drops and scale builds up inside. We install, service and replace these units, change their filters, and can fit a sediment pre-filter on the supply if the site's water carries a lot of grit. At a factory unit on Beauchamp Road in Matraville, we replaced a leaking 3-litre Zip boiling water unit above the kitchenette sink.
Reverse osmosis
Reverse osmosis systems push water through a very fine membrane that removes far more than a carbon filter, including most dissolved salts and fluoride. They produce very pure water but are slower, waste some water in the process, and need more maintenance. They suit some uses, such as certain equipment or people who want fluoride removed, but for most staff kitchens a good carbon filter gives better-tasting water at lower cost. We'll talk through the options with you.
Filters and water pressure
Every filter slows the water a little, and a blocked cartridge slows it a lot. If a filter tap has dropped to a trickle, the cartridge is probably due. If water pressure on the whole site is low, a filter won't help and may make it worse. We check pressure before fitting a filter and make sure the one we choose suits the flow you need. See our water pressure guide.
Hygiene and filter housings
A filter housing that's been left for years with an old cartridge can grow bacteria, especially in a warm cupboard. When we change cartridges, we clean the housing and the O-ring, and if the housing is old or cracked, we replace it. A dated sticker on the housing tells everyone when it was last changed.
Filters for workshops and wash areas
Some sites need filtered water for more than drinking. Parts washers, equipment rinse stations and some processes work better and last longer with sediment-free water. A sediment filter on the supply to a wash area protects spray nozzles, solenoid valves and pumps from grit. If the water is used for anything that touches food or product, we'll talk through what level of filtration makes sense and what else the site may need, such as backflow protection. See backflow testing in Banksmeadow.
Bottled water versus a filter
Many sites pay for bottled water deliveries or a rented water cooler. A plumbed-in filter tap or chilled filtered water unit at the lunchroom sink usually costs less over time, never runs out, and doesn't need bottles stored or swapped. The ongoing cost is a cartridge change once or twice a year. If you're paying for bottled water now, it's worth comparing.
What to tell us when you call
- Whether you want better taste, cleaner water for equipment, or both.
- Where the filter would go: the lunchroom sink, the incoming supply or a particular appliance.
- What the sink or bench is made of, if a new tap is needed.
- How many people use the lunchroom.
- Whether you have a boiling or chilled water unit already.
Changing a cartridge, step by step
- Turn off the isolation valve on the filter's supply.
- Open a filter tap to release the pressure.
- Unscrew the housing bowl and remove the old cartridge.
- Clean the bowl and check the O-ring.
- Fit the new cartridge, refit the bowl and turn the water on slowly.
- Run the filter tap for a few minutes to flush the new cartridge, and write the date on the housing.
We're happy to do it for you as part of a regular service.
Whole-house filters for homes near Botany
For the homes on the Botany side of Banksmeadow, a whole-house filter fitted near the water meter filters every tap, shower and appliance in the house. It's a good option where older pipes in the street or the property send grit and rust through, or where people simply want filtered water everywhere. The housing needs to be big enough for the house's flow, with isolation valves and a bypass so the cartridge can be changed without leaving the house without water. Outdoors near the bay, we use housings and fittings that stand up to salt air.
Filters for a new fit-out
If you're fitting out a new office, lunchroom or factory unit, it's easiest to plan for a filter before the cabinets go in: space in the cupboard for the housing, a hole in the bench for a filter tap or a chilled water unit, and isolation valves where they can be reached. We can work with your fit-out so the filter goes in at the same time as the sink and taps, rather than drilling stone benches afterwards.
A filter care calendar
- Every 6 to 12 months: change carbon cartridges in lunchroom filters; sooner in busy lunchrooms.
- As the maker recommends: change boiling and chilled water unit filters.
- Every few months: check sediment filters on the incoming supply; change them when they discolour or flow drops.
- After mains work: check sediment filters and tap aerators for grit.
- Every year: check housings, O-rings and isolation valves.
Choosing a spot for the filter
A filter only works if someone changes it. Housings tucked behind bins, squeezed behind a dishwasher or mounted at the back of a deep cupboard get forgotten. We mount housings where the cartridge can be seen and changed in a couple of minutes, with the isolation valve right beside it and a clear date sticker on the front. In a factory lunchroom used by a whole shift, that small detail is the difference between a filter that keeps working and one that stopped doing anything years ago.
Filters in leased units
In a leased factory unit or office, a filter tap or chilled water unit you add usually belongs to you, and you can take it with you when you leave. If you're fitting one, keep the receipt and the installation details. When you move out, we can remove the filter and tap, cap the connection and fill or cover the hole in the bench, so the unit is handed back tidy. If the filter came with the building, the lease decides who looks after it.
Why Banksmeadow businesses and homeowners call us
- Based in Matraville, a few minutes from Banksmeadow
- Weekend and early starts when that keeps your site running
- Rated 5.0 from 110 Google reviews
- Options and a fixed price before any work starts
- Lifetime labour warranty on our workmanship
- Licensed plumbers, drainers and gasfitters (Lic. 398171C), with accredited backflow testers on the team
Water filter questions from Banksmeadow businesses and homeowners
Do you install water filters in offices and factories?
Yes. We install filter taps, under-sink filters, sediment filters and equipment filters in offices, lunchrooms, factories and warehouses.
Is Sydney tap water safe to drink?
Yes. Sydney Water treats it to be safe. A filter improves taste and catches sediment from old pipes.
Why is our water brown on Monday mornings?
Water sitting in old galvanised or cast iron pipes over the weekend picks up rust. Running the taps clears it; replacing the pipe fixes it.
Can a filter stop grit damaging our taps?
Yes. A sediment filter on the incoming supply catches most of it.
Can you fit a filter tap at our lunchroom sink?
Yes, including drilling the bench or sink if needed.
How often should cartridges be changed?
Usually every 6 to 12 months, depending on use. A busy lunchroom may need more often.
Do you service boiling water unit filters?
Yes. We change them as part of servicing the unit.
Does a filter remove fluoride?
Most carbon filters don't. Reverse osmosis systems do. We'll explain the options.
Can you fit a filter for our coffee machine?
Yes. We fit filters on the supply to coffee machines and ice makers.
Can you look after cartridge changes for us?
Yes. We can add your site to our service list.
Do you still look after homes in Banksmeadow?
Yes. We install filters for the homes and units on the Botany side of Banksmeadow too.
Do you give a fixed price?
Yes, before any work starts.
More plumbing in Banksmeadow: our Banksmeadow plumber page, tap repairs, hot water and taps and toilets. Nearby: water filters in Botany and Hillsdale. Guides: water filter guide, water filters and water pressure guide.