★★★★★ 5.0 from 100+ Google reviews · Your Sydney Plumber

Gas fitting in Little Bay 2036

We're licensed gasfitters for Little Bay houses, townhouses and apartments: continuous flow hot water repairs and replacements, gas cooktops, wall heaters, balcony and outdoor BBQ points, gas leak testing and repairs, and regulators and fittings corroded by the sea air. If you smell gas, turn it off at the meter, get out and call Jemena on 131 909, then call us. You get a fixed price before any work starts and a compliance certificate for the work.

Gas in Little Bay works hard in tough conditions. Most homes on the Prince Henry estate, built from the early 2000s, have gas continuous flow hot water and a gas cooktop, and many apartments and townhouses have balconies where owners want a BBQ point. In the older 1950s streets and their rebuilds, you'll still find gas storage tanks and old wall heaters. Everywhere, the salt air off the beach, Henry Head and Cape Banks corrodes gas meters, regulators and outdoor pipework. We're licensed gasfitters a few minutes away in Matraville.

Gas work we do in Little Bay

Continuous flow hot water

Error codes and cut-outs fixed; old units replaced, with the gas supply checked.

Gas cooktops

Old cooktops replaced and new ones installed, tested and certified.

Wall and space heaters

Old heaters serviced, flues checked, and heaters replaced or removed.

Balcony and outdoor BBQ points

New gas points for BBQs where the building and gas line allow.

Gas leaks

Leaks found by pressure testing and fixed, with the system retested.

Regulators and fittings

Salt-corroded regulators, unions and outdoor pipework replaced.

If you smell gas

  1. Turn off the gas at the meter if it's safe.
  2. Don't use switches or anything that could spark.
  3. Open doors and windows.
  4. Get everyone outside.
  5. Call Jemena on 131 909.
  6. Then call us to find and fix the leak.

Signs your gas needs attention

  • A smell of gas near an appliance, the meter or a balcony.
  • Yellow or orange flames instead of blue.
  • Soot around a heater or cooktop.
  • A continuous flow unit that cuts out or shows codes.
  • Rust and green crust on the regulator or meter fittings.
  • A heater that's hard to light or smells when it runs.

Why gas fittings fail in Little Bay

Salt air

Little Bay is surrounded by the ocean on its eastern and southern sides. Salt in the air corrodes brass and steel gas fittings, regulators and meter unions. A corroded regulator can deliver the wrong pressure, so appliances run poorly, and corroded unions can start to leak.

Twenty-year-old appliances

Many Prince Henry estate homes still have their original continuous flow units and cooktops. At twenty years, parts wear, igniters and sensors fail, and some parts become hard to get.

Old heaters in older homes

Older homes can still have gas wall heaters. If they haven't been serviced, they can burn poorly, leak, or let fumes back into the room.

Gas supply too small

Adding a continuous flow unit, a bigger cooktop or a BBQ point to a line sized for less can leave appliances short of gas.

Little Bay homes and their gas

Home typeTypical gas useCommon problems
Prince Henry estate housesContinuous flow, cooktopAgeing units, corroded outdoor fittings
TownhousesContinuous flow, cooktop, BBQ pointGas supply sizing, salt on outdoor units
ApartmentsCooktop, sometimes continuous flow, balcony BBQBuilding access, balcony gas rules
1950s homes and rebuildsStorage hot water, heaters, cooktopOld heaters, corroded pipework
Exposed streets near Henry HeadOutdoor meters and unitsHeavy corrosion

How we do gas work

  1. Talk it through: which appliances, and what's happening.
  2. Test: we pressure test the line and check the regulator and appliances.
  3. Find the fault and explain it.
  4. Give you options with a fixed price.
  5. Do the work, using fittings that cope better near the coast.
  6. Test, commission and certify.

Recent gas jobs nearby

We don't have a Little Bay gas job to show yet, so here are two recent jobs close by.

Old gas storage tank replaced with continuous flow, Maroubra (nearby)

The problem: an old gas storage tank beside a Maroubra home had stopped delivering hot water.

What we did: we explained repairing against replacing and the systems that would suit, and the owners chose a Rinnai continuous flow unit. We removed the tank, mounted the new unit on the wall, upsized the copper pipework and replaced the gas regulator at the meter so the new unit gets enough gas.

The result: reliable hot water throughout the house, on a properly sized gas supply.

Old gas hot water tank before replacement, near Little Bay
The old tank, Maroubra
New continuous flow gas unit installed, near Little Bay
The new continuous flow unit

Gas cooktop installed, Matraville (nearby)

The problem: a Matraville owner had bought a new gas cooktop and needed it fitted in place of the old one.

What we did: we disconnected and removed the old cooktop, cut back sections of tile and the benchtop to suit the new one, and fitted a new cement fibre base so it had a solid surface. A new gas flexible hose was connected to the cooktop's regulator, the cooktop was set in place and levelled, and the gas line was purged.

The result: every burner was tested and lit properly, and the new cooktop sits solid and level.

More local work is on our recent projects page.

Quick fix or long-term fix?

ProblemQuick fixLong-term fix
Leak at a corroded unionRemake the jointReplace corroded outdoor fittings
Continuous flow error codeRepair the partReplace an old unit; upsize the gas supply
Yellow flamesClean and adjustService or replace the appliance
Old wall heaterService itReplace it, or remove it and cap the point

What affects the cost

  • The type of work.
  • New pipework length and size.
  • Access: apartment buildings, balconies, ceilings.
  • Testing and certification, included.

You get a fixed price before any work starts.

Who's responsible?

  • You: gas pipes and appliances after the meter that serve your home.
  • Apartments: shared gas pipes belong to the building; your appliances are yours.
  • Jemena: the network and meter. Call 131 909 for leaks.

Quick checks you can do

  1. Know where your gas meter is and how to turn it off.
  2. Check flames are blue.
  3. Look at the regulator and meter fittings for corrosion.
  4. Keep flues and vents clear.

Signs it's urgent and when it can wait

  • Call Jemena straight away if you smell gas strongly, then call us.
  • Call soon if flames are yellow or a heater smells.
  • Book a time if you want a new point or a replacement appliance.

Balcony BBQ points in Little Bay apartments

A fixed gas point on the balcony means no more swapping gas bottles. Whether it's possible depends on where the gas line runs in your apartment, whether the building's gas supply can take the extra load, and what the building allows on balconies. The point needs to be fitted by a licensed gasfitter with the right bayonet fitting and an isolation valve, positioned away from doors, windows and vents, and tested before use. We check all of that first and give you a fixed price, and if it isn't possible in your building, we'll tell you why.

Corroded meters and regulators

Your gas meter and regulator sit outside, often on a wall facing the weather. In Little Bay's salty air, the regulator's vent can block with corrosion, its body can rust, and the unions either side of the meter can begin to weep gas. If you notice a faint gas smell near the meter, rust and green crust on the fittings, or appliances that run poorly all at once, the regulator may be failing. We replace corroded regulators and fittings on your side of the meter; if the meter itself is the problem, we'll tell you so Jemena can attend.

Testing a gas line, step by step

  1. We turn off every appliance and the gas at the meter.
  2. A pressure gauge goes onto a test point.
  3. The line is brought to test pressure and watched. A drop means a leak.
  4. Each joint and connection is checked with leak detection fluid or an electronic detector.
  5. The leaking fitting is remade or replaced, and the line is retested until it holds.
  6. Appliances are purged, relit and checked for a clean blue flame.

Continuous flow and the gas supply

A continuous flow unit needs a lot of gas when it's running flat out. If the gas pipe, regulator or meter is too small, the water goes lukewarm when two showers run or the cooktop is on, and the unit may show an error. On the Maroubra job above, we upsized the copper pipework and replaced the regulator so the new unit had enough gas. We check the supply before quoting any continuous flow replacement.

Old gas wall heaters

Some older Little Bay homes, especially in the streets laid out for the 1950s War Ballot homes, still have a flued gas wall heater in the living room. A well-serviced heater can run safely for many years. One that hasn't been serviced can burn poorly, produce carbon monoxide, leave soot on the wall, or leak gas at its fittings. Signs to watch for are yellow or lazy flames, soot marks, a smell when it runs, or a heater that's hard to light. We service heaters, check the flue is clear and drawing properly, and tell you honestly whether it's worth keeping. If it isn't, we can remove it and cap the gas point, or fit a new heater.

Replacing a gas cooktop

Many Prince Henry estate kitchens still have their original gas cooktop. When one has burners that won't light, a cracked glass top or worn controls, a replacement is usually the answer. A new cooktop must be connected by a licensed gasfitter, with the right regulator and flexible hose, tested and certified. If the new one is a different size, the benchtop cut-out may need adjusting. On a recent Matraville job, we cut back the benchtop and tiles to suit the owner's new cooktop, fitted a cement fibre base, connected a new flexible hose to the cooktop regulator, purged the line and tested every burner. See gas cooktop installation.

Ventilation and flues

Gas appliances need fresh air to burn properly and a way to get rid of combustion gases. Continuous flow units on exposed walls can have their flue outlets partly blocked by salt build-up, insects or debris. Heaters in rooms that have been sealed up for draughts can run short of air. We check flues and ventilation whenever we work on an appliance.

Little Bay, area by area

  • The Prince Henry estate: homes and apartments from the early 2000s with continuous flow hot water and gas cooktops reaching twenty years.
  • The older 1950s streets: gas storage hot water, wall heaters and older pipework.
  • Near Little Bay Beach and the rock pool: outdoor meters and units in salt spray.
  • Towards Henry Head and Malabar: the most exposed spots, where gas fittings corrode fastest.
  • Next door in Chifley, Malabar and La Perouse: we do gas work here every week.

Compliance certificates

In NSW, gas work must be done by a licensed gasfitter, tested and covered by a certificate of compliance. We provide the certificate with every job that needs one. Keep it with your home's records: it's useful if you sell, if your insurer asks, or if the next gasfitter needs to know what was done. See gas compliance certificates.

Gas safety at home

  • Show everyone in the home where the gas meter is and how to turn it off.
  • Keep Jemena's number, 131 909, somewhere easy to find.
  • Don't block vents or flues on heaters and hot water units.
  • Have heaters serviced as the maker recommends.
  • Call us if flames turn yellow or you notice soot.

What to tell us when you call

  • Which appliance, and what it's doing, including any error code.
  • Whether you've smelled gas, and if Jemena has been called.
  • Whether anything new has been added to the gas line.
  • Parking and building access if you're in an apartment.

Gas words explained

  • Regulator: reduces network gas pressure to what appliances need.
  • Pressure test: checks a gas line doesn't leak.
  • Purging: clearing air from a gas line before lighting.
  • Flue: carries combustion gases away from an appliance.
  • Bayonet fitting: a quick-connect gas point for a heater or BBQ.

Gas and the move to electric

Some Little Bay owners are thinking about moving away from gas, replacing a continuous flow unit with a heat pump or a gas cooktop with induction. If you're planning that, we can disconnect and remove gas appliances, cap the lines safely and, if no gas appliances are left, arrange for the meter to be removed with your gas retailer. If you're keeping gas for some appliances, we'll make sure the remaining lines are tested and sized correctly. See hot water in Little Bay for heat pump options.

Outdoor gas in a coastal suburb

Any gas pipework outside in Little Bay, from the meter to a BBQ point or a continuous flow unit on the wall, should be checked every year or two for corrosion. Paint or protective wrap on exposed steel pipe, coastal-grade fittings and regular checks keep it sound. Corroded outdoor gas pipe isn't something to leave: a small leak outdoors can go unnoticed for a long time, and corrosion only gets worse.

Chifley, La Perouse and Phillip Bay

We do gas work across this corner of the Eastern Suburbs. Each neighbour has its own page: gas fitting in Chifley, La Perouse and Phillip Bay.

Our Priority Plan

Our Priority Plan gives you 10% off for the year, a free annual plumbing health check and priority booking. In a coastal home, the yearly check is a good time to look at the gas meter fittings, regulator and outdoor pipework for corrosion. See our Priority Plan.

Servicing a continuous flow unit

A yearly service keeps a continuous flow unit running well, and on an exposed Little Bay wall it matters even more. We clean the water inlet filter, check the burner and flame, test the igniter and flame sensor, look at the fan and flue for salt build-up or blockages, check the gas pressure at the unit under load, and look inside the case for corrosion on the electronics. Small problems found at a service, like a dirty filter or a sensor starting to fail, are much cheaper than a breakdown on a winter morning.

Gas in a home you're buying

If you're buying in Little Bay, it's worth having the gas checked: a pressure test of the line, a look at the regulator and outdoor fittings, the age and condition of the hot water unit and cooktop, and any old heaters. We can do it as part of a pre-purchase plumbing check, so you know what you're taking on.

Why use a local gasfitter

We're a few minutes away in Matraville and work in Little Bay and its neighbours every week. We know how the sea air treats gas fittings here, which continuous flow units are common on the estate, and what to check on older heaters in the 1950s streets. You'll get a clear explanation, a fixed price and a compliance certificate.

Gas leaks you can't smell

Natural gas has a smell added so leaks can be noticed, but a very small leak outdoors in the wind, or in a cupboard you rarely open, can go unnoticed. A gas bill that's crept up without any change in use, or a meter dial that moves when every gas appliance is off, can point to a leak. If you suspect one, turn the gas off at the meter and call us to pressure test the line. Our gasfitters test every job before the gas goes back on, so you know the line is sound.

Gas cooktops in apartments

In Little Bay apartments, gas cooktops are connected to a gas line that runs from the building's supply to your kitchen. Replacing a cooktop is work inside your own apartment, but the gas often has to be turned off at your apartment's isolation valve, and in some buildings at a shared valve. We'll find the right valve, keep the shutdown short, and tell building management if a shared valve needs to be used. Every connection is tested before the gas goes back on, and you get the certificate.

Why Little Bay homeowners call us

  • Based in Matraville, a few minutes from Little Bay
  • Rated 5.0 from 110 Google reviews
  • Free quotes, with options and a fixed price before any work starts
  • Lifetime labour warranty on our workmanship
  • Licensed plumbers, drainers and gasfitters (Lic. 398171C)

Gas fitting questions from Little Bay homeowners

My continuous-flow hot water shows an error code. Can you fix it?

Usually. We check what the code means for your brand and model, test the unit and tell you whether a part will fix it or the unit is due for replacement, with a fixed price either way.

Do you work in Little Bay apartments?

Yes. We work in apartments and townhouses as well as houses. Let us know about parking and building access when you book.

My Chifley cottage has an old wall heater. Is it safe to keep using?

It can be, if it's been serviced and the flue is clear. An unserviced heater can leak gas or let fumes back into the room. We service it, check the flue and tell you honestly whether it's worth keeping. The same goes for older heaters in Little Bay's 1950s homes.

Can you add a gas point for a BBQ on my balcony?

Often, yes, depending on the building and where the gas line runs. We check what's possible and give you a fixed price before any work starts.

Do I get a compliance certificate?

Yes. We issue the compliance certificate for the gas work we do.

What should I do if I smell gas?

Turn it off at the meter if safe, get out, call Jemena on 131 909, then us.

Why is my gas regulator rusty?

Salt air near the coast corrodes it. A corroded regulator should be replaced.

Can you replace my old gas cooktop?

Yes, and install a new one you've chosen.

Why does my hot water go cold when the cooktop is on?

The gas supply may be too small for both. We can check and upsize it.

Can you come today?

We offer same-day service for gas repairs. For a leak, call Jemena first.

Do you remove old gas heaters?

Yes, and we cap the gas point safely.

Do you give a fixed price?

Yes, before any work starts.

More plumbing in Little Bay: our Little Bay plumber and Chifley plumber pages, plus hot water, blocked drains, leak detection and stormwater in Little Bay. See all our gas fitting services. We also do gas work in nearby Malabar, Maroubra and La Perouse.

Call 0401 758 373Free quote